Feed-Through DIN RAIL AND PANEL MOUNTABLE CTS35UN CTS50/70N CTS50/70NA NEW NEW CTS95U/120N NEW with Allen Screw with Allen Screw Terminal Width 16 mm 20.5 mm 20.5 mm Height x Length 58 x 50.5 mm 75.5 x 71 mm 75.5 x 71 mm 90 x 83 mm Stripping Length 15 mm 22 mm 24 mm 24 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps & 1 tapped hole for cross 2 screw clamp connections 2 screw clamp connections 2 screw clamp connections 25 mm Approvals 60947-7-1 Wire Range 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 E220514 12-2 AWG 4-35 sq.mm 12-2 AWG 8-2/0 AWG 10-70 sq.mm 8-2/0 AWG 8-2/0 AWG 10-70 sq.mm 8-2/0 AWG 2-250 KCMIL 25-120 sq.mm 2-250 KCMIL Voltage Rating 600 V 1000 V 600 V 1000V 1000 V 1000 V 1000V 1000 V 1000 V 1000V 1000 V 1000 V Current Rating 130 A 125 A 130 A 175 A 192 A 175 A 175 A 192 A 175 A 240 A 269 A 240 A 25 lb-in 2.5 Nm 25 lb-in 38 lb-in 3 Nm 38 lb-in 38 lb-in 3 Nm 38 lb-in 90 lb-in 6 Nm 90 lb-in Torque Other Approvals Cat. No. Std. Pk. Terminal Block CTS35UN 50 Isolation Partition PP35UN 50 CA702 CA802 50 50 2 pole 3 pole 4 pole 10 pole 100 pole CA771/2 CA771/3 CA771/4 CA771/10 50 25 25 10 2 pole 3 pole 4 pole 10 pole CA781/2 CA781/3 CA781/4 CA781/10 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CTS50/70N 20 CTS50/70NA 20 CTS95U/120N 10 CA202 CA102 50 50 CA202 CA102 50 50 CA202 CA102 DIN Rail for ordering information refer to pages 90-91 End Stop for ordering info. refer to page 92 Internal Jumper Insulated Internal Jumper Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole CA703/10 CA704/10 CA705/10 CA770/10 50 25 25 10 100 100 100 100 Shorting Link System 10 Shorting Sleeve & Screw CA707/S/Q/2 100 Marking Tags MT16 100 50 50 Ratings As Per IEC60947-7-1 Voltage/Current: 1000 V / 41 A Torque: 0.8 Nm IEC 60079-7 Voltage/Current: 630 V / 36 A Torque: 0.8 Nm UL-1059 Voltage/Current: 600 V / 50 A Torque: 14 lb-in CSA22.2-158 Voltage/Current: 600 V / 50 A Torque: 14 lb-in AUX6 Auxiliary Terminal Block Used for: CTS50/70N CTS50/70NA CTS95/120N Wire Range 22-8 AWG In certain power circuits, there is a need to take an extra connection for an Auxiliary circuit like an indicating light or contactor. The AUX6 terminal easily plugs into the terminal and provides this extra connection point. Width x Length x Height 8 x 53.6 x 29.4 mm Std. Pk.: 10 Marking Tag: MT8 CA628/2 CA628/3 10 10 CA628/2 CA628/3 10 10 CA629/2 CA629/3 10 10 MT16 100 MT16 100 MT16 100 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com