M SERIES INPUT MODULES
•
Plug into mounting boards for M Series modules
•
AC Inputs (Yellow Case) for 24 V, 120 V, 240 V
•
DC Inputs (White Case) for 3.3 to 32 V, 10 to 48 V
•
4kV Optical isolation
•
Open-collector Output
•
Industry standard packaging
SPECIFICATIONS
Input
5CAI -M5CAI-MrebmuN traP A M- IAC24 M- IAC24A M-IDC5
Voltage Range 90-140 VAC/DC 180-280 VAC/DC 90-140 VAC/DC 180-280 VAC/DC 3.3-32 VDC/AC
Maximum Current [mA](4) 6 5 6 5 34
Resistance [Ohms](2)(3) 28 k 75 k 28 k 75 k 500
Drop-out Current [mA](5) 2 1.5 2 1.5 1.0
Voltage for No Output [VAC/VDC](6) 50 50 50 50 2.0
Allowable Current [mA] 2.5 2 2.5 2 1.5
Output
Maximum Voltage[VDC](9) 30 30 30 30 30
Maximum Voltage Drop [VDC](12) 0.2 0.2 0.2 0.2 0.2
Nominal Logic Supply Voltage [VDC] 5.0 5.0 24 24 5.0
Logic Supply Voltage Range [VDC] 3.0-6.0 3.0-6.0 20-30 20-30 3.0-6.0
Maximum Current [mA](10) 50 50 50 50 50
Maximum Logic Supply Current [mA](7) 16.0 16.0 16.0 16.0 16.0
Maximum Logic Supply Leakage Current [µA](8) 10.0 10.0 10.0 10.0 10.0
Maximum Leakage Current [µA](11) 10.0 10.0 10.0 10.0 10.0
Maximum Turn-On Time [msec] (13) 20 20 20 20 1.0
Maximum Turn-Off Time [msec] (13) 20 20 20 20 1.0
SPECIFICATIONS
Input
N5CDI-MF5CDI-M42CDI-MrebmuN traP
Voltage Range 3.3-32 VDC/AC 4-32 VDC 10-48 VDC/AC
Maximum Current [mA](4) 34 68 34
Resistance [Ohms](2)(3) 1 k 500 1 k
Drop-out Current [mA](5) 1 1 1
Voltage for No Output [VAC/VDC](6) 2 2 4
Allowable Current [mA] 1.5 1.5 1.5
Output
Maximum Voltage[VDC](9) 30 30 30
Maximum Voltage Drop [VDC](12) 0.2 0.2 0.2
Nominal Logic Supply Voltage [VDC] 24 5.0 5.0
Logic Supply Voltage Range [VDC] 20-30 3.0-6.0 3.0-6.0
Maximum Current [mA](10) 50 50 50
Maximum Logic Supply Current [mA](7) 16.0 16.0 16.0
Maximum Logic Supply Leakage Current [µA](8) 10.0 10.0 10.0
Maximum Leakage Current [µA](11) 10.0 10.0 10.0
Maximum Turn-On Time [msec] (13) 1.0 0.05 8.0
Maximum Turn-Off Time [msec] (13) 1.0 0.10 7.0
Datasheet
I/O Modules
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
(1)
(1)
GENERAL SPECIFICATIONS
Description
Input/Output Isolation Voltage (14) 4000 Vrms
Input/Output Capacitance 8 pF
Operating Temperature Range -30 to 80°C
Storage Temperature Range -40 to 80°C
Line Frequency Range 47 to 63 Hz
Weight 1.1 oz. (31.2g)
GENERAL NOTES:
(1)
Specifications apply to an ambient temperature of -30 to 80 °C unless otherwise noted.
(2)
Resistance values for IAC modules are effective impedance values at 25 °C.
(3)
Resistance values are +/-10% at 25 °C.
(4)
Measured at maximum specified input voltage, 25°C.
(5)
Defined as the maximum current allowed through the module's input to guarantee that
the output will switch from "on" to "off ". Higher currents may result in the output remaining
in the "on" state.
(6)
Defined as the maximum current allowed through the module's input that will not switch
the module's output state from "off to "" on".
(7)
With external LED status indicator at maximum specified logic supply voltage and 25°C.
18mA without external LED.
(8)
At maximum specified logic voltage and 25°C.
(9)
Applied across open collector output transistor.
(10)
Sinking current through the open collector output transistor.
(11)
At maximum output voltage and 25°C.
(12)
At maximum output current and 25°C.
(13)
At nominal logic supply voltage, 25mA output sinking current, nominal input voltage
and 25°C
(14)
At 25°C for 1 second maximum duration.
EQUIVALENT CIRCUIT DIAGRAMS / MECHANICAL SPECIFICATIONS
AGENCY APPROVALS
E46203 38595
Rev. 080916
Datasheet
I/O Modules
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
CASE COLORS:
AC-YELLOW
DC-WHITE
0.3 (7.6)
0.7 (17.8)
1.2 (30.5)
1.4 (35.6)
1.6 (40.6)
1.7 (43.2)
0.042 (1.1) DIA
0.15 (3.81)
0.4 (10.2)
0.035 (.89)
1.0 (25.4)
0.24 (6.1)
12345
UNLESS OTHERWISE SPECIFIED
DIMENSIONS: INCHES (MILLIMETERS)
TOLERANCE:
±
0.020 (
±
0.50)
Datasheet
I/O Modules
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险
HAZARD OF
ELECTRIC
SHOCK,
EXPLOSION,
OR ARC FLASH.
•Disconnect all
power before
installing or
working with
this equipment.
•Verify all
connections
and replace all
covers before
turning on
power.
Failure to follow
these
instructions will
result in death
or serious injury.
RIESGO DE
DESCARGA
ELECTRICA O
EXPLOSION.
•Desconectar
todos los
suministros de
energia a este
equipo antes
de trabajar
con este equipo.
•Verificar todas
las conexiones
y colocar todas
las tapas antes
de energizer
el equipo.
El
incumplimiento
de estas
instrucciones
puede provocar
la muerte o
lesiones serias.
RISQUE DE
DESCHARGE
ELECTRIQUE
OU EXPLOSION
•Eteindre
toutes les
sources
d'énergie de
cet appareil
avant de
travailler
dessus de cet
appareil
•Vérifier tous
connections, et
remettre tous
couverts en
olace avant de
mettre sous
De non-suivi de
ces instructions
provoquera la
mort ou des
lésions sérieuses
sérieuses.
GEFAHR EINES
ELEKTRISCHE
N SCHLAGES
ODER EINER
EXPLOSION.
•Stellen Sie
jeglichen
Strom ab, der
dieses Gerät
versorgt, bevor
Sie an dem
Gerät Arbeiten
durchführen
•Vor dem
Drehen auf
Energie alle
Anschlüsse
überprüfen
und alle
Abdeckungen
ersetzen.
Unterlassung
dieser
Anweisungen
können zum
Tode oder zu
schweren
Verletzungen
führen.
RISCHIO DI
SCOSSA
ELETTRICA O
DELL’ESPLOSIONE.
•Spenga tutta
l'alimentazione
che fornisce
questa
apparecchiatura
prima di lavorare
a questa
apparecchiatura
•Verificare tutti
i collegamenti
e sostituire
tutte le coperture
prima
dell’accensione
L'omissione di
queste istruzioni
provocherà la
morte o
lesioni serie
存在电击、
爆炸或电弧
闪烁危险
•
在操作此设
备之前请先
关闭电源。
若不遵守这些说明，
可能会导致严重的
人身伤害甚至死亡。
WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告
RISK OF MATERIAL DAMAGE AND HOT
ENCLOSURE
• The product's side panels may be hot, allow
the product to cool before touching.
• Follow proper mounting instructions including
torque values.
• Do not allow liquids or foreign objects to enter
this product.
Failure to follow these instructions can result in
serious injury, or equipment damage.
RISQUE DE DOMMAGE MATERIEL ET DE
SURCHAUFFE DU BOITIER
• Les panneaux latéraux du produit peuvent être
chauds. Laisser le produit refroidir avant de le
toucher.
• Respecter les consignes de montage, et
notamment les couples de serrage.
• Ne pas laisser pénétrer de liquide ni de corps
étrangers à l'intérieur du produit.
Le non-respect de cette directive peut entraîner,
des lésions corporelles graves ou des
dommages matériels.
Die Nichtbeachtung dieser Anweisung kann
Körperverletzung oder Materialschäden
zur Folge haben.
GEFAHR VON MATERIALSCHÄDEN UND
GEHÄUSEERHITZUNG
• Die Seitenwände können heiß sein. Lassen Sie
das Produkt abkühlen, bevor Sie es berühren.
• Beachten Sie die Montageanweisungen,
• Führen Sie keine Flüssigkeiten oder
Fremdkörper in das Produkt ein.
Si no se respetan estas precauciones pueden
producirse graves lesiones, daños materiales.
RIESGO DE DAÑOS MATERIALES Y DE
SOBRECALENTAMIENTO DE LA UNIDAD
• Los paneles laterales del producto pueden
estar calientes. Esperar que el producto se
enfríe antes de tocarlo.
• Respetar las instrucciones de montaje, y en
particular los pares de apretado.
• No dejar que penetren líquidos o cuerpos
extraños en el producto.
La mancata osservanza di questa precauzione può
causare gravi rischi per l'incolumità personale o
danni alle apparecchiature.
RISCHIO DI DANNI MATERIALI E D'INVOLUCRO
CALDO
• I pannelli laterali dell'apparecchio possono
scottare; lasciar quindi raffreddare il prodotto
prima di toccarlo.
• Seguire le istruzioni di montaggio corrette.
• Non far entrare liquidi o oggetti estranei in questo
apparecchio.
如不能正确执行这些操作说明，
极有可能造成严重人体伤害或者设备的损坏。
材料损坏和高温外壳的危险性
• 产品的一侧面板可能很热，在其冷却前请
不要触碰。
• 遵照正确的安装说明，包括扭矩值。
• 请勿让液体及其他异物进入本产品。
ANNEX - ENVIROMENTAL INFORMATION
The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China
Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.
Part
Name
Toxic or hazardous Substance and Elements
Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated
(Pb) (Hg) (Cd) Chromium
(Cr (VI))
biphenyls
(PBB)
diphenyl ethers
(PBDE)
Semiconductor die
Solder
附件 - 环保信息
此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006,
电子信息产品污染控制标识要求。
有毒有害物质或元素件部
名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE)
半导体芯片
焊接点
50
Datasheet
I/O Modules
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
