ECCM8-MA-12-30.000MTR - Ecliptek Corporation

ECCM8 Series

• RoHS Compliant (Pb-Free)

• Miniature four pad ceramic

surface mount package

• Standard frequencies up to 32.000MHz

• AT Cut

• Tape and reel available

CRYSTAL

ECCM8

MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE

ECLIPTEK CORP. CRYSTAL ECCM8 CERAMIC CR46 10/06

NOTES

__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

ELECTRICAL SPECIFICATIONS

800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.

H 0.7

L 4.0

W 2.5

Nominal Frequency

16.000MHz, 20.000MHz, 24.576MHz, 25.000MHz, 26.000MHz, 27.000MHz, 30.000MHz,

32.000MHz

Frequency Tolerance / Stability ±50ppm / ±100ppm, ±30ppm / ±50ppm, ±15ppm / ±30ppm, ±15ppm / ±20ppm, or

Over Operating Temperature Range ±10ppm / ±15ppm

Operating Temperature Range 0°C to +70°C, -20°C to +70°C, or -40°C to +85°C

Load Capacitance (CL) 10pF, 12pF, or 16pF

Shunt Capacitance 5pF Maximum

Mode of Operation Fundamental

Crystal Cut AT-Cut

Aging (at 25°C) ±3ppm / year Maximum

Drive Level 100 µWatts Maximum

Storage Temperature Range -40°C to 85°C

Insulation Resistance 500 Megaohms Minimum at 100VDC

Spurious Response -3dB Minimum; F0 to F0 +5000ppm

Equivalent Series Resistance 80 Ohms Maximum from 16.000MHz to 18.999MHz

60 Ohms Maximum from 19.000MHz to 32.000MHz

MECHANICAL DIMENSIONS

ALL DIMENSIONS IN MILLIMETERS

MARKING SPECIFICATIONS

ENVIRONMENTAL/MECHANICAL SPECIFICATIONS

PARAMETER

Fine Leak Test

Gross Leak Test

Mechanical Shock

High Temperature Storage

Low Temperature Storage

Moisture Resistance

Solder Thermal Stability

Thermal Shock

Vibration

MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE

ECLIPTEK CORP. CRYSTAL ECCM8 CERAMIC CR46 10/06

SUGGESTED SOLDER PAD LAYOUT

ALL DIMENSIONS IN MILLIMETERS

Tolerance = +0.2

TAPE AND REEL DIMENSIONS

ALL DIMENSIONS IN MILLIMETERS

M N O P Q

1.5 MIN 50 MIN 20.2 MIN 13±.5 40 MIN

R S T U V

QTY/REEL

2.5 MIN 10 MIN 18.4 MAX 180 MAX 12.4+2-0 1,000

REEL

A B C D E

12±.3 5.5±.1 4.75±.1 4 ±.1 2±.1

F G H J K L

4±.1 2.9±.1 1.5±.1 4.4±.1 .3 ±.05 1 ±.1

TAPE

*Compliant to EIA-481A

PACKAGING OPTIONS

Blank=Bulk, TR=Tape and Reel

FREQUENCY

PART NUMBERING GUIDE

ECCM8 A A - 16 - 32.000M TR

LOAD CAPACITANCE

10=10pF

12=12pF

16=16PF

MODE OF OPERATION

A=Fundamental

FREQUENCY TOLERANCE/STABILITY

A=±50ppm at 25°C, ±100ppm over 0°C to 70°C

B=±50ppm at 25°C, ±100ppm over -20°C to 70°C

C=±50ppm at 25°C, ±100ppm over -40°C to 85°C

D=±30ppm at 25°C, ±50ppm over 0°C to 70°C

E=±30ppm at 25°C, ±50ppm over -20°C to 70°C

F=±30ppm at 25°C, ±50ppm over -40°C to 85°C

G=±15ppm at 25°C, ±30ppm over 0°C to 70°C

H=±15ppm at 25°C, ±30ppm over -20°C to 70°C

J=±15ppm at 25°C, ±30ppm over -40°C to 85°C

K=±15ppm at 25°C, ±20ppm over 0°C to 70°C

L=±15ppm at 25°C, ±20ppm over -20°C to 70°C

M=±15ppm at 25°C, ±20ppm over -40°C to 85°C

N=±10ppm at 25°C, ±15ppm over 0°C to 70°C

P=±10ppm at 25°C, ±15ppm over -20°C to 70°C

Line 1: E XX.X

Frequency in MHz

(3 Digits Maximum + Decimal)

Line 2: XX Y ZZ

Week of Year

Last Digit of Year

Ecliptek Manufacturing Identifier

800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.

Pad 1: Input/Output

Pad 2: Cover/Ground

Pad 3: Input/Output

Pad 4: Cover/Ground

SPECIFICATION

JIS C 6701 10.6 Leak Rate: 2.1x 10-9 Pa-m3/6 Maximum.

JIS C 6701 10.6 Leak Rate: 1.27 x 10-5 Pa-m3/8 Maximum.

Random drop on rigid hard wood surface 3 times at height of

75cm.

JIS C 7021 B-10: at 85°C for 1000 hours.

JIS C 7021 B-12: at -40°C for 1000 hours.

JIS C 7021 B-11: at 85°C and 90% humidity for 1000 hours.

Recommended Solder Reflow profile 1 time.

100 cycles over -40°C to +85°C for 30 minutes.

JIS C 6701 10.26: at 10Hz to 55Hz, 1.5mm amplitude for

1 minute. Test Time: X, Y, Z each direction for 2 hours.