RCV e3 www.vishay.com Vishay Draloric High Voltage Thick Film Chip Resistors FEATURES * High operating voltage, 500 V * Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free and lead containing soldering processes * Metal glaze on high quality ceramic * Compliant to RoHS Directive 2002/95/EC * Halogen-free according to IEC 61249-2-21 definition STANDARD ELECTRICAL SPECIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P70 W LIMITINGELEMENT VOLTAGE UMAX. ACRMS/DC V RCV1206 1206 RR 3216M 0.25 500 TEMPERATURE COEFFICIENT ppm/K TOLERANCE % 100 1 200 5 RESISTANCE RANGE SERIES E24; E96 100K to 10M E24 Notes * These resistors do not feature a lifetime limitation when operated within the limits of rated dissipation, permissible operating voltage and permissible film temperature. However, the resistance typically increases due to the resistor's film temperature over operating time, generally known as drift. The drift may exceed the stability requirements of an individual application circuit and thereby limits the functional lifetime. * No marking. * Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material. TECHNICAL SPECIFICATIONS PARAMETER Rated dissipation P70 (1) UNIT RCV1206 W 0.25 Operating voltage Umax. ACRMS/DC V 500 Insulation voltage Uins. (1 min) V 700 Voltage coefficient of resistance ppm/V 25 > 109 Operating temperature range C - 55 to + 155 Weight mg 10 Insulation resistance Note (1) The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 C is not exceeded. PART NUMBER AND PRODUCT DESCRIPTION Part Number: RCV1206100KFKEA R C V 1 2 0 6 1 0 0 K F K E A MODEL RESISTANCE TOLERANCE TCR PACKAGING RCV1206 K = Thousand M = Million F=1% J=5% K = 100 ppm/K N = 200 ppm/K EA, EB, EC Product Description: RCV1206 100 100K 1 % ET1 e3 RCV1206 100 100K 1% ET1 e3 MODEL TCR RESISTANCE TOLERANCE PACKAGING LEAD (Pb)-FREE RCV1206 100 ppm/K 200 ppm/K 100K = 100 k 10M = 10 M 1% 5% ET1, ET5, ET6 e3 = Pure tin termination finish Revision: 02-Jan-12 Document Number: 20054 1 For technical questions, contact: thickfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RCV e3 www.vishay.com Vishay Draloric PACKAGING MODEL RCV1206 CODE QUANTITY EA = ET1 5 000 EB = ET5 10 000 EC = ET6 20 000 CARRIER TAPE WIDTH PITCH REEL DIAMETER 180 mm/7" Paper tape acc. to IEC 60068-3 Type I 8 mm 4 mm 285 mm/11.25" 330 mm/13" DIMENSIONS SOLDER PAD DIMENSIONS in millimeters SIZE DIMENSIONS in millimeters REFLOW SOLDERING INCH METRIC 1206 3216 L 3.2 + 0.10 - 0.20 WAVE SOLDERING W H T1 T2 a b l a b l 1.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 0.9 1.7 2.0 1.1 1.7 2.3 0 50 Fraction of Rated Dissipation P70 FUNCTIONAL PERFORMANCE 100 % 50 0 - 50 Derating Revision: 02-Jan-12 100 C 150 70 Ambient Temperature in amb Document Number: 20054 2 For technical questions, contact: thickfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RCV e3 www.vishay.com Vishay Draloric TEST PROCEDURES AND REQUIREMENTS PROCEDURE EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST Stability for product types: RCV1206 e3 REQUIREMENTS PERMISSIBLE CHANGE (R) 100 k to 10 M 4.5 - Resistance - 1% 4.7 - Voltage proof U = 1.4 * Uins.; 60 s No flashover or breakdown 4.13 - Short time overload 4.17.2 58 (Td) U = 2.5 x P 70 x R 2 x Umax.; 5s (0.25 % R + 0.05 ) Solder bath method; Sn60Pb40 non-activated flux; (235 5) C (2 0.2) s Good tinning ( 95 % covered); no visible damage Solder bath method; Sn96.5Ag3Cu0.5 non-activated flux; (245 5) C (3 0.3) s Good tinning ( 95 % covered); no visible damage Solderability - Temperature coefficient (20/- 55/20) C and (20/155/20) C 100 ppm/K 4.32 21 (Uu3) Shear (adhesion) 45 N No visible damage 4.33 21 (Uu1) Substrate bending Depth 2 mm; 3 times No visible damage, no open circuit in bent position (0.25 % R + 0.05 ) 4.8.4.2 30 min. at - 55 C; 30 min. at 125 C 4.19 4.23 14 (Na) Rapid change of temperature 5 cycles (0.25 % R + 0.05 ) 1000 cycles (1 % R + 0.05 ) - Climatic sequence: - 4.23.2 2 (Ba) Dry heat 125 C; 16 h 4.23.3 30 (Db) Damp heat, cyclic 55 C; 90 % RH 24 h; 1 cycle 4.23.4 1 (Aa) Cold - 55 C; 2 h 4.23.5 13 (M) Low air pressure 1 kPa; (25 10) C; 1 h 4.23.6 30 (Db) Damp heat, cyclic 55 C; . 90 % RH 24 h; 5 cycle 4.23.7 - DC load U= (1 % R + 0.05 ) P 70 x R U = P 70 x R Umax.; 1.5 h on; 0.5 h off; 4.25.1 4.18.2 4.35 Revision: 02-Jan-12 - Endurance at 70 C 70 C; 1000 h (1 % R + 0.05 ) 70 C; 8000 h (2 % R + 0.1 ) 58 (Td) Resistance to soldering heat Solder bath method (260 5) C; (10 1) s (0.25 % R + 0.05 ) - Flamability, needle flame test IEC 60695-11-5; 10 s No burning after 30 s Document Number: 20054 3 For technical questions, contact: thickfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RCV e3 www.vishay.com Vishay Draloric TEST PROCEDURES AND REQUIREMENTS PROCEDURE EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST Stability for product types: RCV1206 e3 REQUIREMENTS PERMISSIBLE CHANGE (R) 100 k to 10 M 78 (Cab) Damp heat, steady state (40 2) C; (93 3) % RH; 56 days (1 % R + 0.05 ) 4.25.3 - Endurance at upper category temperature 155 C; 1000 h (1 % R + 0.05 ) 4.40 - Electrostatic discharge (human body model) IEC 61340-3-1; 3 pos. + 3 neg. discharges; 1000 V (1 % R + 0.05 ) 4.29 45 (XA) Component solvent resistance Isopropyl alcohol; 50 C; method 2 No visible damage 4.22 6 (Fc) Vibration, endurance by sweeping f = 10 Hz to 2000 Hz; x, y, z 1.5 mm; A 200 m/s2; 10 sweeps per axis (0.25 % R + 0.05 ) 4.37 - Periodic electric overload 15 x P 70 x R 2 x Umax.; 0.1 s on; 2.5 s off; 1000 cycles (1 % R + 0.05 ) 4.27 - Single pulse high voltage overload, 10 s/700 s 4.24 U= U = 10 x P 70 x R 2 x Umax.; 10 pulses (1 % R + 0.05 ) All tests are carried out in accordance with the following specifications: * EN 60115-1, generic specification * EN 140400, sectional specification * EN 140401-802, detail specification * IEC 60068-2-x, environmental test procedures Revision: 02-Jan-12 Document Number: 20054 4 For technical questions, contact: thickfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1