US
UK
Taiwan
China
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest infor
Power Inductor – HA3588-BL
Document 716-1
Document 716-1 Revised 10/19/11
Core material Ferrite
Terminations RoHS compliant tin-silver over copper. Other termina-
tions available at additional cost.
Weight 37 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +85°C.
Tray packaging: –40°C to +80°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 25 parts per tray
PCB washing Only pure water or alcohol recommended
Part Inductance1 DCR max2 SRF typ3
Isat (A)4 Irms (A)5
number ±10% (µH) (mOhms) (MHz) 10% drop 20% drop 30% drop 20°C rise 40°C rise
HA3588-BL 10.0 2.6 17 30 34 37 19 26
1. Inductance tested at 300 kHz, 0.1 Vrms on Agilent/HP 4192A.
2. DCR measured on a Keithley 580 micro-ohmmeter or equivalent.
3. SRF measured on an Agilent/HP 8753ES network analyzer.
4. DC current at which the inductance drops the specified amount from
its value without current.
5. Current that causes the specified temperature rise of the winding from
25°C ambient. Temperature rise of the core is usually less than that of
the winding.
6. Electrical specifications at 25°C.
0.133
3,38
0.133
3,38
0.060
1,52
XXXX X
HA3588-BL
1.05 ±0.02
26,67 ±0,51
22,15 ±0,61
0.150
3,81
0.50
12,7 0.030
0,76
0.230
5,84
0.230
5,84
Recommended
C
L
C
L
0.190
4,86
16,46 ±0,51
0.130 ±0.01
3,3 ±0,254
Parts manufactured
prior to September 2011
may be marked differently.
Dimensions are in inches
mm
• Designed for high current power supply applications
• Saturation current of 37 Amps
• Flat wire windings provide exceptionally low DC resistance
• Vertical mounting provides a small footprint
Caution:
This series is not intended for use in high vibration
or mechanical shock environments. We advise using
additional means of securing the part to the circuit
board to ensure its adhesion.