NTD110N02R, STD110N02R MOSFET - Power, N-Channel, DPAK 24 V, 110 A Features * * * * * * * Planar HD3e Process for Fast Switching Performance Low RDS(on) to Minimize Conduction Loss Low Ciss to Minimize Driver Loss Low Gate Charge Optimized for High Side Switching Requirements in High-Efficiency DC-DC Converters S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free and are RoHS Compliant http://onsemi.com V(BR)DSS RDS(on) TYP ID MAX 24 V 4.1 mW @ 10 V 110 A D N-Channel G S 4 MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Symbol Value Unit Drain-to-Source Voltage VDSS 24 V Gate-to-Source Voltage - Continuous VGS 20 V Thermal Resistance - Junction-to-Case Total Power Dissipation @ TC = 25C Drain Current - Continuous @ TC = 25C, Chip - Continuous @ TC = 25C Limited by Package - Continuous @ TA = 25C Limited by Wires - Single Pulse (tp = 10 ms) RqJC PD 1.35 110 C/W W ID ID 110 110 A A ID 32 A ID 110 A Thermal Resistance - Junction-to-Ambient (Note 1) - Total Power Dissipation @ TA = 25C - Drain Current - Continuous @ TA = 25C RqJA PD ID 52 2.88 17.5 C/W W A Thermal Resistance - Junction-to-Ambient (Note 2) - Total Power Dissipation @ TA = 25C - Drain Current - Continuous @ TA = 25C RqJA PD ID 100 1.5 12.5 C/W W A TJ, Tstg -55 to 175 C Single Pulse Drain-to-Source Avalanche Energy - Starting TJ = 25C (VDD = 50 Vdc, VGS = 10 Vdc, IL = 15.5 Apk, L = 1.0 mH, RG = 25 W) EAS 120 mJ Maximum Lead Temperature for Soldering Purposes, (1/8 from case for 10 s) TL Operating and Storage Temperature Range 260 C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. When surface mounted to an FR4 board using 0.5 sq in drain pad size. 2. When surface mounted to an FR4 board using the minimum recommended pad size. (c) Semiconductor Components Industries, LLC, 2014 May, 2019 - Rev. 11 1 1 2 3 DPAK CASE 369AA (Surface Mount) STYLE 2 MARKING DIAGRAM & PIN ASSIGNMENT 4 Drain AYWW T 110N2G Rating 2 1 3 Drain Gate Source A Y WW T110N2 G = Assembly Location* = Year = Work Week = Device Code = Pb-Free Package * The Assembly Location code (A) is front side optional. In cases where the Assembly Location is stamped in the package, the front side assembly code may be blank. ORDERING INFORMATION See detailed ordering and shipping information on page 5 of this data sheet. Publication Order Number: NTD110N02R/D NTD110N02R, STD110N02R ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted) Symbol Characteristic Min Typ 24 28 15 Max Unit OFF CHARACTERISTICS V(BR)DSS Drain-to-Source Breakdown Voltage (Note 3) (VGS = 0 V, ID = 250 mA) Positive Temperature Coefficient Zero Gate Voltage Drain Current (VDS = 20 V, VGS = 0 V) (VDS = 20 V, VGS = 0 V, TJ = 125C) IDSS Gate-Body Leakage Current (VGS = 20 V, VDS = 0 V) IGSS V mV/C 1.5 10 100 mA nA ON CHARACTERISTICS (Note 3) Gate Threshold Voltage (Note 3) (VDS = VGS, ID = 250 mA) Negative Threshold Temperature Coefficient VGS(th) Static Drain-to-Source On-Resistance (Note 3) (VGS = 10 V, ID = 110 A) (VGS = 4.5 V, ID = 55 A) (VGS = 10 V, ID = 20 A) (VGS = 4.5 V, ID = 20 A) RDS(on) Forward Transconductance (VDS = 10 V, ID = 15 A) (Note 3) V 1.0 1.5 5.0 2.0 mV/C mW 4.1 5.5 3.9 5.5 4.6 6.2 gFS 44 Mhos Ciss 2710 3440 Coss 1105 1670 Crss 450 640 td(on) 11 22 tr 39 80 td(off) 27 40 tf 21 40 QT 23.6 28 nC QGS 5.1 QGD 11 VSD 0.82 0.99 0.65 1.2 V trr 36.5 ta 30 tb 25 Qrr 0.048 DYNAMIC CHARACTERISTICS Input Capacitance Output Capacitance (VDS = 20 V, VGS = 0 V, f = 1.0 MHz) Transfer Capacitance pF SWITCHING CHARACTERISTICS (Note 4) Turn-On Delay Time Rise Time Turn-Off Delay Time (VGS = 10 V, VDD = 10 V, ID = 40 A, RG = 3.0 W) Fall Time Gate Charge (VGS = 4.5 V, ID = 40 A, VDS = 10 V) (Note 3) ns SOURCE-DRAIN DIODE CHARACTERISTICS Forward On-Voltage (IS = 20 A, VGS = 0 V) (Note 3) (IS = 55 A, VGS = 0 V) (IS = 20 A, VGS = 0 V, TJ = 125C) Reverse Recovery Time (IS = 30 A, VGS = 0 V, dIS/dt = 100 A/ms) (Note 3) Reverse Recovery Stored Charge ns mC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulse Test: Pulse Width 300 ms, Duty Cycle 2%. 4. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 NTD110N02R, STD110N02R 5V 4.5 V 6V 125 210 TJ = 25C ID, DRAIN CURRENT (AMPS) 150 4.2 V 4V 3.8 V 3.6 V 3.4 V 3.2 V 100 75 50 3V 2.8 V 2.6 V 2.4 V 25 0 RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) 10 V 8V 0 2 4 150 120 90 TJ = 175C 60 TJ = 25C 30 TJ = -55C 0 2 Figure 2. Transfer Characteristics 0.01 2 6 4 8 10 0.014 TJ = 25C 0.012 0.01 0.008 VGS = 4.5 V 0.006 0.004 VGS = 10 V 0.002 0 20 40 60 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) 80 100 120 140 160 180 200 220 240 ID, DRAIN CURRENT (AMPS) Figure 3. On-Resistance versus Gate-to-Source Voltage Figure 4. On-Resistance versus Drain Current and Gate Voltage 100,000 2.0 VGS = 0 V ID = 55 A VGS = 10 V TJ = 175C 10,000 IDSS, LEAKAGE (nA) RDS(on), DRAIN-TO-SOURCE RESISTANCE (NORMALIZED) 8 Figure 1. On-Region Characteristics 0.02 1.6 1.4 1.2 1.0 1000 100 TJ = 100C 0.8 0.6 -50 6 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) ID = 110 A TJ = 25C 1.8 4 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) 0.03 0 VDS 10 V 180 0 10 8 6 RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) ID, DRAIN CURRENT (AMPS) 175 -25 0 25 50 75 100 125 150 175 10 0 5.0 10 15 20 TJ, JUNCTION TEMPERATURE (C) VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current versus Voltage http://onsemi.com 3 25 C, CAPACITANCE (pF) VDS = 0 V VGS = 0 V TJ = 25C Ciss 4000 3000 Ciss 2000 Crss 1000 Coss 0 Crss 10 0 5 VGS 5 10 15 20 5 20 QT 4 16 VGS QGS 3 QDS VDS 2 8 1 0 ID = 40 A TJ = 25C 0 5 VDS Figure 7. Capacitance Variation IS, SOURCE CURRENT (AMPS) tf tr 10 1 td(on) 1 10 20 0 25 100 100 VGS = 0 V TJ = 25C 80 60 40 20 0 0.4 0.8 0.6 1.0 RG, GATE RESISTANCE (W) VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS) Figure 9. Resistive Switching Time Variation versus Gate Resistance Figure 10. Diode Forward Voltage versus Current 1000 ID, DRAIN CURRENT (AMPS) t, TIME (ns) td(off) 100 15 Figure 8. Gate-to-Source and Drain-to-Source Voltage versus Total Charge 120 VDS = 10 V ID = 55 A VGS = 10 V 10 4 Qg, TOTAL GATE CHARGE (nC) GATE-TO-SOURCE OR DRAIN-TO-SOURCE VOLTAGE (VOLTS) 1000 12 VGS = 20 V SINGLE PULSE TC = 25C 100 1 ms 10 ms 10 1.0 dc RDS(on) Limit Thermal Limit Package Limit 0.1 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) 5000 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) NTD110N02R, STD110N02R 1.0 10 100 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) Figure 11. Maximum Rated Forward Biased Safe Operating Area http://onsemi.com 4 1.2 r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) NTD110N02R, STD110N02R 1.0 D = 0.5 0.2 0.1 0.1 0.05 0.02 0.01 Single Pulse 0.01 0.00001 0.0001 0.001 0.01 0.1 1.0 10 t, TIME (s) Figure 12. Thermal Response ORDERING INFORMATION Package Shipping NTD110N02RT4G DPAK (Pb-Free) 2500 / Tape & Reel STD110N02RT4G* DPAK (Pb-Free) 2500 / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable. http://onsemi.com 5 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS DPAK (SINGLE GUAGE) CASE 369AA-01 ISSUE B 4 1 2 DATE 03 JUN 2010 3 SCALE 1:1 A E b3 c2 B Z D 1 L4 A 4 L3 2 b2 H DETAIL A 3 c b 0.005 (0.13) e M H C L2 GAUGE PLANE C L L1 DETAIL A A1 ROTATED 905 CW STYLE 1: PIN 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE STYLE 5: PIN 1. GATE 2. ANODE 3. CATHODE 4. ANODE STYLE 6: PIN 1. MT1 2. MT2 3. GATE 4. MT2 STYLE 7: PIN 1. GATE 2. COLLECTOR 3. EMITTER 4. COLLECTOR STYLE 4: PIN 1. CATHODE 2. ANODE 3. GATE 4. ANODE SOLDERING FOOTPRINT* 6.20 0.244 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. C 2.58 0.102 5.80 0.228 3.00 0.118 1.60 0.063 INCHES MIN MAX 0.086 0.094 0.000 0.005 0.025 0.035 0.030 0.045 0.180 0.215 0.018 0.024 0.018 0.024 0.235 0.245 0.250 0.265 0.090 BSC 0.370 0.410 0.055 0.070 0.108 REF 0.020 BSC 0.035 0.050 --- 0.040 0.155 --- MILLIMETERS MIN MAX 2.18 2.38 0.00 0.13 0.63 0.89 0.76 1.14 4.57 5.46 0.46 0.61 0.46 0.61 5.97 6.22 6.35 6.73 2.29 BSC 9.40 10.41 1.40 1.78 2.74 REF 0.51 BSC 0.89 1.27 --- 1.01 3.93 --- GENERIC MARKING DIAGRAM* XXXXXXG ALYWW YWW XXX XXXXXG IC Discrete XXXXXX A L Y WW G 6.17 0.243 SCALE 3:1 SEATING PLANE DIM A A1 b b2 b3 c c2 D E e H L L1 L2 L3 L4 Z = Device Code = Assembly Location = Wafer Lot = Year = Work Week = Pb-Free Package *This information is generic. Please refer to device data sheet for actual part marking. mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. DOCUMENT NUMBER: DESCRIPTION: 98AON13126D DPAK (SINGLE GAUGE) Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. (c) Semiconductor Components Industries, LLC, 2019 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative