Technical Data August 2014 3MTM EMI Absorber AB5000 Series Product Description 3MTM EMI Absorber AB5000 Series consists of flexible soft metal flakes filler loaded polymer resin and acrylic pressure sensitive adhesive. 3M absorber AB5000 series is available in standard A4 size and 210mm (width) x 15 meters length) in roll. Features and Benefits * Polymer resin and metal flakes filler * Acrylic pressure sensitive adhesive * Supplied on a removable liner for easy handling and die-cutting Applications 3M absorber AB5000 series is typically used for applications requiring electromagnetic absorbing performance. 3M absorber AB5000 series suppresses radiated noise from electrical devices for broadband radio frequency range. Common uses include mobile phone, computer, digital still camera, military equipment and associated electronic equipment. Attenuation and Power Loss Many factors determine the true attenuation of an electromagnetic absorbing material, including shape and thickness, intimacy of substrate contact, smoothness of application surface, strength and frequency of the EMI signal, etc. However, using standard tests and fixtures, it is possible to determine a value for the signal attenuation. 3M absorber AB5000 series' typical attenuation range is dependent on thickness. 3MTM EMI Absorber AB5000 Series 3MTM EMI Absorber AB5000 Series Typical Properties Note: T he following technical information and data should be considered representative or typical only and should not be used for specification purposes. Properties Typical Value Type of Backing Polymeric resin with magnetic metal flake filler Type of Adhesive Acrylic non-conductive pressure sensitive adhesive (PSA) Product Number AB5010 AB5020 AB5030 AB5050 AB5100 Thickness1 0.10mm 0.20mm 0.30mm 0.50mm 1.00mm Standard Packaging 210mm x 15mm Temperature Range -25 ~ 85C Surface Resistivity2 1 x 106 (min) Thermal Conductivity 0.7 W/mK Tensile Strength3 6.0 MPa (min) Attenuation (S11 Reflection Loss) and Power Loss4 1 Refer to attached chart This value does not contain a double side adhesive tape thickness. Typical adhesive tape thickness is 50 m (AB5010 contains 30 m adhesive) 2 Test method: ASTM D257. 3 Test method: JIS K 6521. 4 210mm x 10mm Attenuation measured by 7mm coaxial verification kit under short fixed condition. Power loss measured by 50 microstrip line. Attenuation 0 Reflection Loss (dB) -1 -3 -4 -5 AB5010 AB5020 AB5030 AB5050 AB5100 -6 -7 -8 45 100 1000 Frequency [MHz] (2) 1.0 10000 Reflec AB5020 AB5030 AB5050 -7 3MTM EMI Absorber AB5000 Series AB5100 -6 -8 3M EMI Absorber AB5000 Series Typical Properties (continued) TM 45 100 1000 10000 Note: T he following technical information and data should be considered representative or typical only and should not be used for specification purposes. Power Loss Frequency [MHz] Power Loss (PLoss /PIn ) 1.0 AB5010 AB5020 AB5030 AB5050 AB5100 0.8 0.6 0.4 0.2 0.0 45 100 1000 6000 Frequency [MHz] Power Loss (only AB5005) 1.0 Power Loss (PLoss /PIn ) 0.8 0.6 0.4 0.2 0.0 45 100 1000 Frequency [MHz] (3) 6000 3MTM EMI Absorber AB5000 Series Storage and Shelf Life The shelf life of 3MTM EMI Absorber AB5000 Series is 12 months from the shipment date from the manufacturing location when stored in original packaging at 21C (70F) and 50% relative humidity. Safety Data Sheet Please consult Safety Data Sheet prior to use. Regulatory For regulatory information about this product, contact your 3M representative. Technical Information The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use Many factors beyond 3M's control and uniquely within user's knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. Warranty, Limited Remedy, and Disclaimer Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. Limitation of Liability Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Electronics Materials Solutions Division 3M Center, Building 225-3S-06 St. Paul, MN 55144-1000 1-800-251-8634 phone 651-778-4244 fax www.3M.com/electronics 3M is a trademark of 3M Company. Please recycle. (c) 3M 2014. All rights reserved. 60-5002-0703-4 (4)