TOSHIBA Fiber optic connector TOCP155K Simlex fiber optic connector for APF TOCP155K Fiber clamp Protective cap Plug case Product name Quantity Plug case > WUAP OE 1p Protective cap: WATTS 1p 1.Absolute maximum ratings (Ta = 25C) Characteristics Symbol Rating Unit Storage Temperature Tstg -40~70 C Operating Temperature Topr -20~70 2008-12-24 TOSHIBA 2. Component (1) Plug case (VJM7091) 6.7 13+0.3 (2) Protective cap (VJA7115) 63.8. Et 3. Marking [ TOCP155 TOSHIBA JAPAN 4. Weight 1. 728 TOCP155K Unit : mm 2008-12-24 TOSHIBA TOCP155K 5. Packing Protective cap 1000p c s Plug case 100pcs Label Plastic bag \ Cushion Plastic bag Protective cap / 2 plastic bag Plug case 20 case Packing case 3 2008-12-24 TOSHIBA TOCP155K 6. Label J quantity P/N: ZL TOSHIBA TYPE TOCPIL55K / ADD.C QTY fp i < \ Bar cord Lot no. and >: management code {[G]//RoHS COMPATIBLE diffusion Management code : - Assembly < Bar code 7. Precautions during use (1) The Absolute maximum ratings are the limit values which must not be exceeded during operation of device. None of these rating value must not be exceeded. if the Absolute maximum rating value is exceeded, the characteristics of devices may never be restored properly. In extreme cases, the device may be permanently damages. (2) When inserting the fiber optic connector into the fiber optic transceiving module, be sure to follow the correct fitting alignment. (3) Since specialized assembly tools are available for the fiber optic connector used with TOSLINK devices, persons without specialist knowledge can assemble the connectors. However, the person who assembled the product is responsible for its characteristics and quality. When using a connector in an application where reliability is essential, Toshiba recommends purchasing a Pre-assembled product or contacting a specialist with the necessary expertise. (4) When discarding devices and packing materials, follow procedures stipulated by local regulations in order to protect the environment against contamination. 4 2008-12-24 TOSHIBA TOCP155K This product has no Lot No. on package (REF : outer box) e Plag case material : Polybutylen terephthalate (PBT) RESTRICTIONS ON PRODUCT USE e TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the Handling Guide for Semiconductor Devices, or TOSHIBA Semiconductor Reliability Handbook etc. e The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (Unintended Usage). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this document shall be made at the customers own risk. e The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. e The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. 5* 2008-12-24