PDTA323TK PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 k, R2 = open Rev. 01 -- 16 June 2005 Product data sheet 1. Product profile 1.1 General description 500 mA PNP Resistor-Equipped Transistors (RET) in a small SOT346 (SC-59A) SMD plastic package. NPN complement: PDTC323TK 1.2 Features Built-in bias resistors Simplifies circuit design 500 mA output current capability Reduces component count Reduces pick and place costs 1.3 Applications Digital application in automotive and industrial segments Controlling IC inputs Cost-saving alternative for BC807 series in digital applications Switching loads 1.4 Quick reference data Table 1: Quick reference data Symbol Parameter Conditions Min Typ Max Unit VCEO collector-emitter voltage open base - - -15 V IO output current (DC) - - -500 mA R1 bias resistor 1 (input) 1.54 2.2 2.86 k PDTA323TK Philips Semiconductors PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 k, R2 = open 2. Pinning information Table 2: Pinning Pin Description Simplified outline 1 input (base) 2 GND (emitter) 3 output (collector) Symbol 3 3 R1 1 1 2 2 sym009 3. Ordering information Table 3: Ordering information Type number PDTA323TK Package Name Description Version SC-59A plastic surface mounted package; 3 leads SOT346 4. Marking Table 4: Marking codes Type number Marking code PDTA323TK 60 5. Limiting values Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit VCBO collector-base voltage open emitter - -30 V VCEO collector-emitter voltage open base - -15 V VEBO emitter-base voltage open collector - -5 V VI input voltage positive - +5 V negative - -12 V - -500 mA - 250 mW storage temperature -65 +150 C Tj junction temperature - 150 C Tamb ambient temperature -65 +150 C IO output current (DC) Ptot total power dissipation Tstg [1] Tamb 25 C Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. 9397 750 15076 Product data sheet [1] (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 -- 16 June 2005 2 of 8 PDTA323TK Philips Semiconductors PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 k, R2 = open 6. Thermal characteristics Table 6: Symbol Rth(j-a) [1] Thermal characteristics Parameter Conditions thermal resistance from junction to ambient in free air [1] Min Typ Max Unit - - 500 K/W Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. 7. Characteristics Table 7: Characteristics Tamb = 25 C unless otherwise specified. Symbol Parameter Conditions Typ Max Unit ICBO collector-base cut-off VCB = -30 V; IE = 0 A current - - -100 nA ICEO collector-emitter cut-off current VCE = -15 V; IB = 0 A - - -0.5 A IEBO emitter-base cut-off current VEB = -5 V; IC = 0 A - - -100 nA hFE DC current gain VCE = -5 V; IC = -50 mA 100 250 - VCEsat collector-emitter saturation voltage IC = -50 mA; IB = -2.5 mA - -35 -80 mV R1 bias resistor 1 (input) 1.54 2.2 2.86 k Cc collector capacitance VCB = -10 V; IE = ie = 0 A; f = 100 MHz - 11 - pF 9397 750 15076 Product data sheet Min (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 -- 16 June 2005 3 of 8 PDTA323TK Philips Semiconductors PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 k, R2 = open 006aaa455 103 hFE 006aaa456 -10-1 VCEsat (V) (1) (1) (2) (2) (3) (3) 102 -10-1 -1 -10 -102 -103 -10-2 -10-1 IC (mA) VCE = -5 V -10 IC (mA) -102 IC/IB = 20 (1) Tamb = 100 C (1) Tamb = 100 C (2) Tamb = 25 C (2) Tamb = 25 C (3) Tamb = -40 C (3) Tamb = -40 C Fig 1. DC current gain as a function of collector current; typical values Fig 2. Collector-emitter saturation voltage as a function of collector current; typical values 9397 750 15076 Product data sheet -1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 -- 16 June 2005 4 of 8 PDTA323TK Philips Semiconductors PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 k, R2 = open 8. Package outline 1.3 1.0 3.1 2.7 3 0.6 0.2 3.0 1.7 2.5 1.3 1 2 1.9 Dimensions in mm 0.50 0.35 0.26 0.10 04-11-11 Fig 3. Package outline SOT346 (SC-59A/TO-236) 9. Packing information Table 8: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number Package Description Packing quantity 3000 PDTA323TK [1] SOT346 4 mm pitch, 8 mm tape and reel -115 10000 - -135 For further information and the availability of packing methods, see Section 15. 9397 750 15076 Product data sheet 5000 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 -- 16 June 2005 5 of 8 PDTA323TK Philips Semiconductors PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 k, R2 = open 10. Revision history Table 9: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes PDTA323TK_1 20050616 Product data sheet - 9397 750 15076 - 9397 750 15076 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 -- 16 June 2005 6 of 8 PDTA323TK Philips Semiconductors PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 k, R2 = open 11. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 12. Definitions customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 14. Trademarks 13. Disclaimers Notice -- All referenced brands, product names, service names and trademarks are the property of their respective owners. Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors 15. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com 9397 750 15076 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 -- 16 June 2005 7 of 8 PDTA323TK Philips Semiconductors PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 k, R2 = open 16. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Packing information. . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 2 2 2 3 3 5 5 6 7 7 7 7 7 (c) Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 16 June 2005 Document number: 9397 750 15076 Published in The Netherlands