1. Product profile
1.1 General description
500 mA PNP Resistor-Equipped Transistors (RET) in a small SOT346 (SC-59A) SMD
plastic package.
NPN complement: PDTC323TK
1.2 Features
1.3 Applications
1.4 Quick reference data
PDTA323TK
PNP 500 mA, 15 V resistor-equipped transistor;
R1 = 2.2 kΩ, R2 = open
Rev. 01 — 16 June 2005 Product data sheet
■Built-in bias resistors ■Reduces component count
■Simplifies circuit design ■Reduces pick and place costs
■500 mA output current capability
■Digital application in automotive and
industrial segments ■Cost-saving alternative for BC807 series
in digital applications
■Controlling IC inputs ■Switching loads
Table 1: Quick reference data
Symbol Parameter Conditions Min Typ Max Unit
VCEO collector-emitter voltage open base - - −15 V
IOoutput current (DC) - - −500 mA
R1 bias resistor 1 (input) 1.54 2.2 2.86 kΩ
9397 750 15076 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 01 — 16 June 2005 2 of 8
Philips Semiconductors PDTA323TK
PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 kΩ, R2 = open
2. Pinning information
3. Ordering information
4. Marking
5. Limiting values
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
Table 2: Pinning
Pin Description Simplified outline Symbol
1 input (base)
2 GND (emitter)
3 output (collector)
12
3
sym009
3
2
1R1
Table 3: Ordering information
Type number Package
Name Description Version
PDTA323TK SC-59A plastic surface mounted package; 3 leads SOT346
Table 4: Marking codes
Type number Marking code
PDTA323TK 60
Table 5: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VCBO collector-base voltage open emitter - −30 V
VCEO collector-emitter voltage open base - −15 V
VEBO emitter-base voltage open collector - −5V
VIinput voltage
positive - +5 V
negative - −12 V
IOoutput current (DC) - −500 mA
Ptot total power dissipation Tamb ≤25 °C[1] - 250 mW
Tstg storage temperature −65 +150 °C
Tjjunction temperature - 150 °C
Tamb ambient temperature −65 +150 °C
9397 750 15076 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 01 — 16 June 2005 3 of 8
Philips Semiconductors PDTA323TK
PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 kΩ, R2 = open
6. Thermal characteristics
[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
7. Characteristics
Table 6: Thermal characteristics
Symbol Parameter Conditions Min Typ Max Unit
Rth(j-a) thermal resistance
from junction to
ambient
in free air [1] - - 500 K/W
Table 7: Characteristics
T
amb
=25
°
C unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
ICBO collector-basecut-off
current VCB =−30 V; IE=0A - - −100 nA
ICEO collector-emitter
cut-off current VCE =−15 V; IB=0A - - −0.5 µA
IEBO emitter-base cut-off
current VEB =−5 V; IC=0A - - −100 nA
hFE DC current gain VCE =−5 V; IC=−50 mA 100 250 -
VCEsat collector-emitter
saturation voltage IC=−50 mA;
IB=−2.5 mA -−35 −80 mV
R1 bias resistor 1 (input) 1.54 2.2 2.86 kΩ
Cccollector capacitance VCB =−10 V;IE=i
e=0A;
f = 100 MHz -11-pF
9397 750 15076 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 01 — 16 June 2005 4 of 8
Philips Semiconductors PDTA323TK
PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 kΩ, R2 = open
VCE = −5 V
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = −40 °C
IC/IB = 20
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = −40 °C
Fig 1. DC current gain as a function of collector
current; typical values Fig 2. Collector-emitter saturation voltage as a
function of collector current; typical values
006aaa455
IC (mA)
−10−1−103
−102
−1−10
103
hFE
102
(2)
(3)
(1)
006aaa456
IC (mA)
−10−1−102
−10−1
−10−1
VCEsat
(V)
−10−2
(2)
(3)
(1)
9397 750 15076 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 01 — 16 June 2005 5 of 8
Philips Semiconductors PDTA323TK
PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 kΩ, R2 = open
8. Package outline
9. Packing information
[1] For further information and the availability of packing methods, see Section 15.
Fig 3. Package outline SOT346 (SC-59A/TO-236)
04-11-11Dimensions in mm
3.0
2.5 1.7
1.3
0.26
0.10
12
3
1.9
0.50
0.35
1.3
1.0
3.1
2.7
0.6
0.2
Table 8: Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.
[1]
Type number Package Description Packing quantity
3000 5000 10000
PDTA323TK SOT346 4 mm pitch, 8 mm tape and reel -115 - -135
9397 750 15076 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 01 — 16 June 2005 6 of 8
Philips Semiconductors PDTA323TK
PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 kΩ, R2 = open
10. Revision history
Table 9: Revision history
Document ID Release date Data sheet status Change notice Doc. number Supersedes
PDTA323TK_1 20050616 Product data sheet - 9397 750 15076 -
Philips Semiconductors PDTA323TK
PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 kΩ, R2 = open
9397 750 15076 © Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet Rev. 01 — 16 June 2005 7 of 8
11. Data sheet status
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at
URL http://www.semiconductors.philips.com.
[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
12. Definitions
Short-form specification — The data in a short-form specification is
extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.
Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warranty that such applications will be suitable for
the specified use without further testing or modification.
13. Disclaimers
Life support — These products are not designed for use in life support
appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to
make changes in the products - including circuits, standard cells, and/or
software - described or contained herein in order to improve design and/or
performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Change Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.
14. Trademarks
Notice — All referenced brands, product names, service names and
trademarks are the property of their respective owners.
15. Contact information
For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
Level Data sheet status[1] Product status[2] [3] Definition
I Objective data Development This data sheet contains data from the objective specification for product development. Philips
Semiconductors reserves the right to change the specification in any manner without notice.
II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
© Koninklijke Philips Electronics N.V. 2005
All rights are reserved. Reproduction in whole or in part is prohibited without the prior
written consent of the copyright owner. The information presented in this document does
not form part of any quotation or contract, is believed to be accurate and reliable and may
be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under
patent- or other industrial or intellectual property rights. Date of release: 16 June 2005
Document number: 9397 750 15076
Published in The Netherlands
Philips Semiconductors PDTA323TK
PNP 500 mA, 15 V resistor-equipped transistor; R1 = 2.2 kΩ, R2 = open
16. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description. . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
6 Thermal characteristics. . . . . . . . . . . . . . . . . . . 3
7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3
8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 5
9 Packing information. . . . . . . . . . . . . . . . . . . . . . 5
10 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 6
11 Data sheet status. . . . . . . . . . . . . . . . . . . . . . . . 7
12 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
13 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
14 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
15 Contact information . . . . . . . . . . . . . . . . . . . . . 7
