FDME820NZT N-Channel PowerTrench(R) MOSFET 20 V, 9 A, 18 m Features General Description Max rDS(on) = 18 m at VGS = 4.5 V, ID = 9 A This Single N-Channel MOSFET has been designed using Fairchild Semiconductor's advanced Power Trench process to optimize the rDS(ON) @ VGS = 1.8 V on special MicroFET leadframe. Max rDS(on) = 24 m at VGS = 2.5 V, ID = 7.5 A Max rDS(on) = 32 m at VGS = 1.8 V, ID = 7 A Low profile: 0.55 mm maximum in the new package MicroFET 1.6x1.6 Thin Applications Free from halogenated compounds and antimony oxides Li-lon Battery Pack HBM ESD protection level >2.5 kV (Note3) Baseband Switch RoHS Compliant Load Switch DC-DC Conversion G D Pin 1 D S D D D D G S S D D BOTTOM TOP MicroFET 1.6x1.6 Thin MOSFET Maximum Ratings TA = 25 C unless otherwise noted Symbol VDS Drain to Source Voltage Parameter VGS Gate to Source Voltage Drain Current ID -Continuous TA = 25 C (Note 1a) -Pulsed PD TJ, TSTG Ratings 20 Units V 12 V 9 40 Power Dissipation for Single Operation TA = 25 C (Note 1a) 2.1 Power Dissipation for Single Operation TA = 25 C (Note 1b) 0.7 Operating and Storage Junction Temperature Range -55 to +150 A W C Thermal Characteristics RJA Thermal Resistance, Junction to Ambient (Note 1a) 70 RJA Thermal Resistance, Junction to Ambient (Note 1b) 190 C/W Package Marking and Ordering Information Device Marking 8T Device FDME820NZT (c)2012 Fairchild Semiconductor Corporation FDME820NZT Rev.C2 Package MicroFET 1.6x1.6 Thin 1 Reel Size 7 '' Tape Width 8 mm Quantity 5000 units www.fairchildsemi.com FDME820NZT N-Channel PowerTrench(R) MOSFET October 2013 Symbol Parameter Test Conditions Min Typ Max Units Off Characteristics BVDSS Drain to Source Breakdown Voltage ID = 250 A, VGS = 0 V BVDSS TJ Breakdown Voltage Temperature Coefficient ID = 250 A, referenced to 25 C IDSS Zero Gate Voltage Drain Current VDS = 16 V, VGS = 0 V 1 A IGSS Gate to Source Leakage Current VGS = 12 V, VDS = 0 V 10 A 1.0 V 20 V 20 mV/C On Characteristics VGS(th) Gate to Source Threshold Voltage VGS = VDS, ID = 250 A VGS(th) TJ Gate to Source Threshold Voltage Temperature Coefficient ID = 250 A, referenced to 25 C -3 rDS(on) Drain to Source On Resistance 0.5 0.8 mV/C VGS = 4.5 V, ID = 9 A 14 VGS = 2.5 V, ID = 7.5 A 17 24 VGS = 1.8 V, ID = 7 A 26 32 VGS = 4.5 V, ID = 9 A , TJ = 125 C 19 24 VDS = 10 V, VGS = 0 V, f = 1 MHz 865 pF 203 pF 190 pF 1.0 18 m Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate Resistance Switching Characteristics td(on) Turn-On Delay Time 9 ns tr Rise Time 5 ns td(off) Turn-Off Delay Time tf Fall Time Qg Total Gate Charge Qg Total Gate Charge Qgs Gate to Source Gate Charge Qgd Gate to Drain "Miller" Charge VDD = 10 V, ID = 4 A VGS = 4.5 V, RGEN = 2 19 ns 5 ns VDD = 4.2 V, ID = 3 A, VGS = 4.3 V 8.0 nC VDD = 4.2 V, ID = 3 A, VGS = 4.5 V 8.5 nC 1.4 nC 3.2 nC VDD = 10 V, ID = 9 A Drain-Source Diode Characteristics VSD Source to Drain Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge VGS = 0 V, IS = 1.6 A (Note 2) 0.7 1.2 VGS = 0 V, IS = 9 A (Note 2) 0.8 1.2 IF = 9 A, di/dt = 100 A/us V V 18 ns 4 nC Notes: 1. RJA is determined with the device mounted on a 1 in2 pad 2 oz copper pad on a 1.5 x 1.5 in. board of FR-4 material. RJC is guaranteed by design while RCA is determined by the user's board design. a. 70 C/W when mounted on a 1 in2 pad of 2 oz copper. b. 190 C/W when mounted on a minimum pad of 2 oz copper. SS SF DS DF G SS SF DS DF G 2. Pulse Test: Pulse Width < 300s, Duty cycle < 2.0%. 3. The diode connected between the gate and source serves only as protection ESD. No gate overvoltage rating is implied. (c)2012 Fairchild Semiconductor Corporation FDME820NZT Rev.C2 2 www.fairchildsemi.com FDME820NZT N-Channel PowerTrench(R) MOSFET Electrical Characteristics TJ = 25 C unless otherwise noted 40 5 NORMALIZED DRAIN TO SOURCE ON-RESISTANCE ID, DRAIN CURRENT (A) VGS = 4.5 V VGS = 3 V VGS = 2.5 V 30 VGS = 1.8 V 20 VGS = 2 V PULSE DURATION = 80 s DUTY CYCLE = 0.5% MAX 10 VGS = 1.5 V 0 0 0.5 1.0 1.5 2.0 4 VGS = 1.8 V VGS = 2 V 3 2 VGS = 3 V 0 2.5 Figure 1. On Region Characteristics VGS = 4.5 V 0 10 20 ID, DRAIN CURRENT (A) 40 80 ID = 9 A VGS = 4.5 V rDS(on), DRAIN TO 1.4 1.2 1.0 0.8 SOURCE ON-RESISTANCE (m) NORMALIZED DRAIN TO SOURCE ON-RESISTANCE 30 Figure 2. Normalized On-Resistance vs Drain Current and Gate Voltage 1.6 PULSE DURATION = 80 s DUTY CYCLE = 0.5% MAX 60 ID = 9 A 40 TJ = 125 oC 20 TJ = 25 oC -50 -25 0 25 50 75 0 0.9 100 125 150 TJ, JUNCTION TEMPERATURE (oC) 1.8 2.7 3.6 4.5 VGS, GATE TO SOURCE VOLTAGE (V) Figure 3. Normalized On Resistance vs Junction Temperature Figure 4. On-Resistance vs Gate to Source Voltage 1000 40 IS, REVERSE DRAIN CURRENT (A) PULSE DURATION = 80 s DUTY CYCLE = 0.5% MAX ID, DRAIN CURRENT (A) VGS = 2.5 V 1 VDS, DRAIN TO SOURCE VOLTAGE (V) 0.6 -75 PULSE DURATION = 80 s DUTY CYCLE = 0.5% MAX VGS = 1.5 V VDS = 5 V 30 20 TJ = 150 oC TJ = 25 oC 10 TJ = -55 oC 0 0.0 0.5 1.0 1.5 2.0 2.5 100 TJ = 150 oC 10 TJ = 25 oC 1 0.1 TJ = -55 oC 0.01 0.001 0 3.0 VGS, GATE TO SOURCE VOLTAGE (V) 0.2 0.4 0.6 0.8 1.0 1.2 VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 5. Transfer Characteristics (c)2012 Fairchild Semiconductor Corporation FDME820NZT Rev.C2 VGS = 0 V Figure 6. Source to Drain Diode Forward Voltage vs Source Current 3 www.fairchildsemi.com FDME820NZT N-Channel PowerTrench(R) MOSFET Typical Characteristics TJ = 25 C unless otherwise noted 2000 ID = 9 A 3.6 1000 VDD = 8 V CAPACITANCE (pF) VGS, GATE TO SOURCE VOLTAGE (V) 4.5 2.7 VDD = 10 V 1.8 VDD = 12 V Ciss Coss 0.9 0.0 f = 1 MHz VGS = 0 V 0 3 6 9 100 0.1 12 1 Figure 7. Gate Charge Characteristics 20 Figure 8. Capacitance vs Drain to Source Voltage -1 20 10 Ig, GATE LEAKAGE CURRENT (A) IAS, AVALANCHE CURRENT (A) 10 VDS, DRAIN TO SOURCE VOLTAGE (V) Qg, GATE CHARGE (nC) 10 TJ = 25 oC TJ = 100 oC TJ = 125 oC -2 VGS = 0 V 10 -3 10 -4 10 TJ = 125 oC -5 10 -6 10 -7 10 TJ = 25 oC -8 10 -9 10 -10 1 0.001 0.01 0.1 1 10 10 100 0 3 tAV, TIME IN AVALANCHE (ms) P(PK), PEAK TRANSIENT POWER (W) 100 us 1 ms THIS AREA IS LIMITED BY rDS(on) 10 ms SINGLE PULSE TJ = MAX RATED 100 ms 1s 10 s DC RJA = 190 oC/W 0.01 0.01 12 15 18 1000 10 0.1 9 Figure 10. Gate Leakage Current vs Gate to Source Voltage 100 1 6 VGS, GATE TO SOURCE VOLTAGE (V) Figure 9. Unclamped Inductive Switching Capability ID, DRAIN CURRENT (A) Crss TA = 25 oC 0.1 1 10 100 TA = 25 oC 10 1 0.1 -4 10 -3 10 -2 10 -1 10 1 10 100 1000 t, PULSE WIDTH (s) VDS, DRAIN to SOURCE VOLTAGE (V) Figure 11. Forward Bias Safe Operating Area (c)2012 Fairchild Semiconductor Corporation FDME820NZT Rev.C2 SINGLE PULSE RJA = 190 oC/W 100 Figure 12. Single Pulse Maximum Power Dissipation 4 www.fairchildsemi.com FDME820NZT N-Channel PowerTrench(R) MOSFET Typical Characteristics TJ = 25 C unless otherwise noted 2 NORMALIZED THERMAL IMPEDANCE, ZJA 1 0.1 DUTY CYCLE-DESCENDING ORDER D = 0.5 0.2 0.1 0.05 0.02 0.01 PDM t1 t2 0.01 SINGLE PULSE NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZJA x RJA + TA o RJA = 190 C/W 0.001 -4 10 -3 10 -2 10 -1 10 1 10 100 1000 t, RECTANGULAR PULSE DURATION (s) Figure 13. Junction-to-Ambient Transient Thermal Response Curve (c)2012 Fairchild Semiconductor Corporation FDME820NZT Rev.C2 5 www.fairchildsemi.com FDME820NZT N-Channel PowerTrench(R) MOSFET Typical Characteristics TJ = 25 C unless otherwise noted FDME820NZT N-Channel PowerTrench(R) MOSFET Dimensional Outline and Pad Layout (c)2012 Fairchild Semiconductor Corporation FDME820NZT Rev.C2 6 www.fairchildsemi.com tm *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used here in: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handing and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Definition Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I66 (c)2012 Fairchild Semiconductor Corporation FDME820NZT Rev.C2 7 www.fairchildsemi.com FDME820NZT N-Channel PowerTrench(R) MOSFET TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. AccuPowerTM Sync-LockTM F-PFSTM (R) AX-CAP(R)* FRFET(R) (R)* (R) SM Global Power Resource PowerTrench BitSiCTM GreenBridgeTM PowerXSTM Build it NowTM TinyBoost(R) Programmable Active DroopTM CorePLUSTM Green FPSTM TinyBuck(R) (R) QFET CorePOWERTM Green FPSTM e-SeriesTM TinyCalcTM CROSSVOLTTM QSTM GmaxTM TinyLogic(R) Quiet SeriesTM CTLTM GTOTM TINYOPTOTM RapidConfigureTM Current Transfer LogicTM IntelliMAXTM TinyPowerTM DEUXPEED(R) ISOPLANARTM TM TinyPWMTM Dual CoolTM Marking Small Speakers Sound Louder TinyWireTM Saving our world, 1mW/W/kW at a timeTM EcoSPARK(R) and BetterTM TranSiCTM SignalWiseTM EfficentMaxTM MegaBuckTM TriFault DetectTM SmartMaxTM ESBCTM MICROCOUPLERTM TRUECURRENT(R)* SMART STARTTM MicroFETTM (R) SerDesTM Solutions for Your SuccessTM MicroPakTM SPM(R) MicroPak2TM Fairchild(R) STEALTHTM MillerDriveTM Fairchild Semiconductor(R) UHC(R) SuperFET(R) MotionMaxTM FACT Quiet SeriesTM (R) Ultra FRFETTM SuperSOTTM-3 mWSaver FACT(R) UniFETTM OptoHiTTM SuperSOTTM-6 FAST(R) VCXTM OPTOLOGIC(R) SuperSOTTM-8 FastvCoreTM VisualMaxTM OPTOPLANAR(R) SupreMOS(R) FETBenchTM VoltagePlusTM SyncFETTM FPSTM XSTM Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Fairchild Semiconductor: FDME820NZT