ACA2402S7
750/870 MHz Push - Pull CATV
Line Amplifier MMIC
Advanced Product Information - Rev 1
S7
16 Pin Plastic Pin Package
FEATURES
·22 dB Gain
·Very Low Distortion
·Excellent Input/Output Match
·Low DC Power Consumption
·Good RF Stability with high VSWR Load
Conditions
· Surface Mount Package
·Package Fully Automatic Assembly
Compatible
·Low Cost
·Repeatability of Monolithic Fabrication
·Meets Cenelec Standard
Description
The ACA2402 surface mount monolithic GaAs RF Linear Amplifier has been developed to replace, in new
designs, the standard CATV Hybrid amplifiers currently in use. The MMIC consists of two pair of parallel
amplifiers. The Amplifiers are optimized for exceptionally low distortion and noise figure while providing flat
gain and excellent input and output return loss. A Hybrid equivalent is formed when one ACA2402 is
cascaded between two transmission line baluns.
Absolute Maximum Ratings
RETEMARAPNIMXAMSTINU
V
DD
V/
TUOFR
082CDV
FR
NI
-07+VmBd
erutarepmeTegarotS56-051+C°
erutarepmeTgniredloS-062+C°
emiTgniredloS-0.5ceS
ecnatsiseRlamrehT-8.3W/C°
erutarepmeTgnitarepO04-011C°
2
ACA2402S7
The ACA2402 is designed as an input stage and is specifited at +40 dBmV flat ouput.
Electrical Specifications (TA=+25°C, VDD=24V, test circuit shown in fig.1)
Notes:
1. Measured with a balun on input and output of the device. See Figure 1 for test setup.
2. Parts measured with 110 channel flat output @ +40 dBmV/channel.
RETEMARAP
2042ACA
NIMPYTXAM
htdiwdnaB04- 078
zHM078@niaG
1
-22-
epolStnelaviuqEelbaC
1
-2.0-
ssentalFniaG
1
zHM078@-2.0±-
erugiFesioN
1
-5.3-
BTC
2,1
slennahC77
slennahC011
slennahC821
-07-
66-
46-
-
OSC
2,1
slennahC77
slennahC011
slennahC821
-17-
96-
66-
-
DOMX
2,1
slennahC77
slennahC011
slennahC821
-26-
85-
65-
-
tnerruCylppuS-032-
)tuptuO/tupnI(ssoLnruteR
1
8122-
3
ACA2402S7
Figure 1: Test Circuit for ACA2402
Package Outline
0.01 uF
RF Out
RF In
T1
T2
0.01 uF
0.01 uF
330 pF
330 pF
0.39 uH
0.39 uH
TVS
TVS:P6KE33AGICT
Transient Voltage Suppressor
0.39 uH
0.39 uH
330 pF
+ 24 V
0.01 u F
0.01 uF
+ 24 V
9
10
11
12
13
14
15
161
2
3
4
5
6
7
8
ACA2402
330 pF
0.01 uF
6.6 kohm
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any time without notice.
The Advanced Product data sheets and product specifications contained in this data sheet are subject to change prior to
a products formal introduction. The information in this data sheet has been carefully checked and is assumed to be reliable.
However, ANADIGICS assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the
information they are using is current before placing orders.
WARNING
ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of an ANADIGICS
product in any such application without written consent is prohibited.
ANADIGICS, Inc.
35 Technology Drive
Warren, New Jersey 07059
Tel: (908) 668-5000
Fax: (908) 668-5132
http://www.anadigics.com
Mktg@anadigics.com