MSO5104B-GSA - TEKTRONIX - Datasheet.Directory

Mixed Signal Oscilloscopes

MSO5000B, DPO5000B Series Datasheet

Designing with today’s faster data rates and tighter timing margins requires

an oscilloscope with outstanding signal acquisition performance and

analysis capabilities. Tektronix MSO/DPO5000B Series oscilloscopes

provide exceptional signal fidelity, with 2 GHz bandwidth and 10 GS/s

sample rate, along with advanced analysis and math capabilities, on your

bench and in your lab. Run Windows®-based analysis software right on the

oscilloscope. Point and click Visual Triggers enable you to capture complex

signals with ease. MSO models include 16 digital timing channels, and all

models can be equipped to decode common serial protocols, providing a

comprehensive view of your systems.

Key performance specifications

2 GHz, 1 GHz, 500 MHz, and 350 MHz bandwidth models

Up to 10 GS/s real-time sample rate on one or two channels and up to

5 GS/s on all four channels

Up to 250 megapoint record length with MultiView zoom™

>250,000 wfms/s maximum waveform capture rate with FastAcq™

acquisition

FastFrame™ segmented memory acquisition mode with up to

290,000 segments and >310,000 waveforms per second capture rate

Standard 10 MΩ passive voltage probes with less than 4 pF capacitive

loading and 500 MHz or 1 GHz analog bandwidth

>11 bits vertical resolution using HiRes sampling

User-selectable bandwidth limit and DSP filters for lower noise and

better measurement accuracy

Key analysis features

Wave inspector® controls provide easy navigation and automated

search of waveform data

Suite of advanced triggers, with standard Visual Trigger and Search

53 automated measurements, selectable filtering, waveform math and

FFT analysis

Waveform histogram, eye diagram, TIE (jitter/timing) measurement and

analysis

User-definable math using MATLAB, Visual Studio and Excel

Optional analysis for memory, advanced jitter, serial data, power and

Wideband RF

Key protocol features

Trigger and decode options for mid-speed (100 Mb/s to 1 Gb/s) buses

Trigger and decode options for low-speed (<10 Mb/s) buses

Compliance test options for USB2.0, Ethernet, USB power, MOST,

BroadR-Reach

Mask testing on communication, computing and video standards

Mixed signal design and analysis (MSO Series)

16 digital channels (user upgradeable)

MagniVu™ high-speed acquisition provides 60.6 ps timing resolution on

all digital channels

Automated triggering, decode, and search on parallel buses

Per-channel threshold settings

www.tektronix.com 1

See the performance difference

With up to 2 GHz analog bandwidth and sampling rates up to 10 GS/s, the

MSO/DPO5000B series ensures you have the performance you need to

capture waveforms with the best possible signal fidelity and resolution for

seeing small waveform details.

Performance - With up to 2 GHz bandwidth and 10 GS/s sample rate capture

USB2.0 480 Mb/s differential signals with true fidelity and 100 ps resolution.

Accurate high-speed probing

The TPP Series probes, included standard with every MSO/DPO5000B

Series oscilloscope, provide up to 1 GHz of analog bandwidth, and less

than 4 pF of capacitive loading. The extremely low capacitive loading

minimizes adverse effects on your circuits and is more forgiving of longer

ground leads. And with the probe's wide bandwidth, you can see the high

frequency components in your signal, which is critical for high-speed

applications. The TPP Series passive voltage probes offer all the benefits

of general-purpose probes like high dynamic range, flexible connection

options, and robust mechanical design, while providing the performance of

active probes.

Probing - Up to 1 GHz bandwidth and less than 4 pF capacitive loading provides active

probe performance and superior performance over passive probes included with other

mid-range oscilloscopes.

Fast discovery

To debug a design problem, first you must know it exists. Every design

engineer spends time looking for problems in their design, a time-

consuming and difficult task without the right debug tools. The MSO/

DPO5000B Series offers the industry's most complete performance to

capture and isolate events, providing fast insight into the real operation of

your device. Tektronix proprietary FastAcq™ technology delivers a fast

waveform capture - greater than 250,000 waveforms per second - that

enables you to see glitches and other infrequent transients within seconds,

revealing the true nature of device faults. A digital phosphor display with

color intensity grading shows the history of a signal's activity by using color

to identify areas of the signal that occur more frequently, providing a visual

display of just how often anomalies occur across all channels.

Discover – fast waveform capture rate - over 250,000 wfm/s - maximizes the probability

of capturing elusive glitches and other infrequent events.

Datasheet

2 www.tektronix.com

High vertical resolution

If the measurement requirement is to capture high-amplitude signals while

seeing smaller signal details the MSO/DPO5000B provides the acquisition

flexibility needed to capture the signals of interest while removing the

effects of unwanted noise. With HiRes acquisition vertical resolution can be

increased to over 11 bits while reducing signal noise. Signal fidelity can be

further increased by using channel input filters or applying a wide choice of

DSP filters.

Capture - HiRes acquisition - increased vertical resolution to >11 bits while removing

noise on a 650 V Pk-Pk signal while seeing the smaller details of less than 1 V Pk-Pk

with or without apply low-pass filtering.

Long record length

With up to a 250 M point record length, you can capture many events of

interest, even thousands of serial packets, in a single acquisition for further

analysis while maintaining high resolution to zoom in on fine signal details.

For complex analysis like Time Interval Error (TIE) measurements the

longer record length ensures you have enough data captured for handling

clock recovery and creating jitter profiles. Unlike other oscilloscopes in its

class, the MSO/DPO5000B provides flexible setup of both record length

and sampling rate to ensure optimum resolution.

Capture - 100 Meg point acquisition with HiRes acquisition - increase vertical resolution

to >11 bits with dual zoom of waveform details.

Segmented memory

For more efficient data capture, partitioning of memory can extend the total

time captured. FastFrame™ Segmented Memory mode enables you to

select up to 290,000 memory segments with a trigger capture rate of over

310,000 triggers per second. Beyond memory flexibility, segments are time

stamped and can be viewed individually or as an overlay and analyzed

using advanced features like protocol decoding.

Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series

www.tektronix.com 3

FastFrame™ - User selectable memory segments allow for efficient memory

management with time stamped capture of SPI bus data along with analysis of serial bus

decoding on multiple data packets. Frames 1, 2, and 9 are shown here.

Mixed signal design and analysis (MSO

Series)

The MSO5000B Series mixed-signal oscilloscopes provide 16 digital

channels. These channels are tightly integrated into the oscilloscope's user

interface, simplifying operation and making it possible to solve mixed-signal

issues easily. MSO functionality can also be added later as a user upgrade.

Color-coded digital waveform display

The MSO5000B Series has redefined the way you view digital waveforms.

One common problem with other mixed-signal oscilloscopes is determining

if data is a one or a zero when zoomed in far enough that the digital trace

stays flat all the way across the display. To avoid this problem, the

MSO5000B Series has color-coded digital traces, displaying ones in green

and zeros in blue.

With the color-coded digital waveform display, low values are shown in blue and high

values are shown in green, enabling instant understanding of the bus value whether

transitions are visible or not.

The multiple transition detection hardware of the MSO5000B Series will

show you when the system detects more than one transition. This indicates

that more information is available by zooming in or acquiring at faster

sampling rates. In most cases zooming in will reveal a glitch that was not

viewable with the previous settings.

MagniVu™ high-speed acquisition

The main digital acquisition mode on the MSO5000B Series will capture up

to 40 M points at 500 MS/s (2 ns resolution). In addition to the main record,

the MSO5000B provides an ultra high-resolution record called MagniVu

which acquires 10,000 points at up to 16.5 GS/s (60.6 ps resolution). Both

the main and MagniVu waveforms are acquired on every trigger and either

can be displayed at any time, running or stopped. MagniVu provides

significantly finer timing resolution than comparable mixed-signal

oscilloscopes on the market, instilling confidence when making critical

timing measurements on digital waveforms.

Datasheet

4 www.tektronix.com

The MagniVu high-resolution record provides 60.6 ps timing resolution, enabling you to

make critical timing measurements on your digital waveforms.

Versatile trigger and search

Discovering a device fault is only the first step. Next, you must capture the

event of interest to identify root cause The MSO/DPO5000B Series

provides a complete set of triggers - including runt, glitch, width, timeout,

transition, pattern, state, setup/hold violation, serial packet, and parallel

data - to help quickly find your event.

Visual trigger

Finding the right characteristic of a complex signal can require hours of

collecting and sorting through thousands of acquisitions for the event of

interest. Defining a trigger that isolates the desired event and shows data

only when the event occurs speeds up this process. Visual Trigger and

Search makes the identification of the desired waveform events quick and

easy by scanning through all waveform acquisitions and comparing them to

on-screen areas (geometric shapes). Areas can be created using a variety

of shapes including triangles, rectangles, hexagons, trapezoids, and user-

specified shapes to fit the area to the particular trigger behavior desired.

Set up to eight areas and condition based on Boolean logic conditions.

Visual Trigger- Capture signals on two channels with Visual triggering with multiple

defined areas and markers showing repeat occurrences.

Navigation and search

Finding your event of interest in a long waveform record can be time

consuming without the right search tools. With today's record lengths

pushing beyond a million data points, locating your event can mean

scrolling through thousands of screens of signal activity.

The MSO/DPO5000B Series offers the industry's most comprehensive

search and waveform navigation with its innovative Wave Inspector®

controls. These controls speed panning and zooming through your record.

With a unique force-feedback system, you can move from one end of your

record to the other in just seconds. User marks allow you to mark any

location that you may want to reference later for further investigation. Or,

automatically search your record for criteria you define. Wave Inspector will

instantly search your entire record, including analog, digital, and bus data.

Along the way it will automatically mark every occurrence of your defined

event so you can quickly move between events. The standard Advanced

Search and Mark capability of the MSO/DPO5000B Series can even search

for up to eight different events simultaneously and stop a live acquisition

when it finds an event of interest, saving even more time.

Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series

www.tektronix.com 5

Search - Results of an advanced search for a runt pulse or a narrow glitch within a long

waveform record.

Comprehensive analysis

Verifying that your prototype's performance matches simulations and meets

the project's design goals requires analyzing its behavior. Tasks can range

from simple checks of rise times and pulse widths to sophisticated power

loss analysis, characterization of system clocks, and investigation of noise

sources. The MSO/DPO5000B Series offers a comprehensive set of

integrated analysis tools including waveform- and screen-based cursors,

53 automated measurements, advanced waveform math including arbitrary

equation editing, waveform histograms, and FFT analysis.

Analyze - Waveform histogram of the rising and falling edge of a 622 Mb/s signal

showing the distribution of edge position (jitter) over time. Included are numeric

measurements made on the waveform histogram data.

The standard limit test package enables long-term signal monitoring,

characterizing signals during design, and production line testing. Limit test

compares a tested signal to a known good or "golden" version of the same

signal with user-defined vertical and horizontal tolerances. You can tailor a

limit test to your specific requirements by defining test duration in a number

of waveforms, setting a violation threshold that must be met before

considering a test a failure, counting hits with statistical information, and

setting actions upon violations, test failure, and test complete.

Custom analysis

When signal analysis needs extend beyond the standard or optional

analysis features, the Windows 7 based MSO/DPO5000B series has the

flexibility to support custom analysis. Apply your custom algorithms using

custom MATLAB and .NET math plug-ins for analysis functions that are

integrated in the oscilloscope user interface for more seamless operation.

Custom analysis - Waterfall display generated from oscilloscope data using MATLAB.

Jitter analysis

Every MSO/DPO5000B Series oscilloscope includes the DPOJET

Essentials jitter and eye pattern analysis software package, extending the

oscilloscope's measurement capabilities to take measurements over

contiguous clock and data cycles in a single-shot real-time acquisition. This

enables measurement of key jitter and timing analysis parameters such as

Time Interval Error and Phase Noise to help characterize possible system

timing issues. Analysis tools such as plots for time trends and histograms

quickly show how timing parameters change over time, and spectrum

analysis quickly shows the precise frequency and amplitude of jitter and

modulation sources.

Datasheet

6 www.tektronix.com

Jitter analysis - TIE jitter/timing analysis of 622 Mb/s signal

Extend jitter/timing analysis with the optional DPOJET Advanced software

package (Option DJA). DPOJET Advanced adds advanced tools such as

Rj/Dj separation, eye diagram masks, and Pass/Fail limits for conformance

testing. DPOJET Advanced is also a measurement framework that works

with standards-specific compliance test packages for applications such as

DDR memory and USB.

Power analysis (optional)

The optional power analysis software package (Option PWR) enables quick

and accurate analysis of power quality, switching loss, harmonics, magnetic

measurements, safe operating area (SOA), modulation, ripple, and slew

rate (di/dt, dv/dt). Automated, repeatable power measurements are

available with a touch of a button; no external PC or complex software

setup is required. The package includes a report generation tool to create

customizable, detailed reports to document your measurement results.

Power- B-H plot.

DDR memory bus analysis (optional)

The optional DDR memory analysis software package (Option DDRA)

automatically identifies DDR1, DDR2, LP-DDR, and LP-DDR2 Reads and

Writes and makes JEDEC conformance measurements with Pass/Fail

results on all edges in every Read and Write burst, perfect for debugging

and troubleshooting DDR memory buses. Also provided are common

measurements of clock, address, and control signals. Used with DPOJET

(Option DJA), Option DDRA is the fastest way to debug complex memory

signaling issues.

Vector signal analysis (optional)

The optional SignalVu™ vector signal analysis package (Option SVE) easily

validates wideband designs and characterizes wideband spectral events.

By combining the signal analysis engine of Tektronix real-time spectrum

analyzers with the wide bandwidth acquisition of Tektronix digital

oscilloscopes, you can now evaluate complex baseband signals directly on

your oscilloscope. You get the functionality of a vector signal analyzer, a

spectrum analyzer, and the powerful trigger capabilities of a digital

oscilloscope - all in a single package. Whether your design validation needs

include wideband radar, high data-rate satellite links, or frequency hopping

communications, SignalVu™ vector signal analysis software can speed

your time-to-insight by showing you time-variant behavior of these

wideband signals.

SignalVu™ enables detailed analysis in multiple domains.

Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series

www.tektronix.com 7

Protocol triggering and analysis (optional)

On a serial bus, a single signal often includes address, control, data, and

clock information. This can make isolating events of interest difficult. The

MSO/DPO5000B Series offers a robust set of tools for debugging serial

buses with automatic trigger and decode on I2C, SPI, CAN, LIN, FlexRay,

RS-232/422/485/UART, MIL-STD-1553, Ethernet, and USB 2.0, and

decode for HSIC, 8b/10b, PCI Express, and MIPI D-PHY DSI-1 and

CSI-2 serial buses.

Triggering on a USB full-speed serial bus. A bus waveform provides decoded packet

content including Start, Sync, PID, Address, End Point, CRC, Data values, and Stop.

Serial triggering

Trigger on packet content such as start of packet, specific addresses,

specific data content, unique identifiers, etc. on popular serial interfaces

such as I2C, SPI, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-

STD-1553, Ethernet, and USB 2.0.

Bus display

Provides a higher-level, combined view of the individual signals (clock,

data, chip enable, etc.) that make up your bus, making it easy to identify

where packets begin and end and identifying subpacket components such

as address, data, identifier, CRC, etc.

Bus decoding

Tired of having to visually inspect the waveform to count clocks, determine

if each bit is a 1 or a 0, combine bits into bytes, and determine the hex

value? Let the oscilloscope do it for you! Once you've set up a bus, the

MSO/DPO5000B Series will decode each packet on the bus, and display

the value in hex, binary, decimal (USB only) or ASCII (USB and

RS-232/422/485/UART only) in the bus waveform.

Event table display

In addition to seeing decoded packet data on the bus waveform itself, you

can view all captured packets in a tabular view much like you would see in

a software listing. Packets are time stamped and listed consecutively with

columns for each component (Address, Data, etc.).

Event table showing decoded SPI serial packet data with bus timing waveform for a long

acquisition.

Compliance testing

Serial bus compliance test (optional)

Software packages for automated compliance test are available for

Ethernet 10BASE-T, 10BASE-Te, 100BASE-TX, and 1000BASE-T (Option

ET3), MOST50 and MOST150 electrical (Option MOST), BroadR-Reach

(Option BRR), and USB 2.0 (Option USB) physical-layer devices. These

software packages enable you to conduct testing using the standard's

specified compliance tests.

Datasheet

8 www.tektronix.com

Mask testing

The optional mask test (Option MTM) software package is useful for long-

term signal monitoring, characterizing signals during design, and production

line testing. The mask test software includes a robust set of masks for

telecommunications and computer standards for easily checking

compliance to a standard. Additionally, custom masks can be created and

used for characterizing signals. With mask testing you can tailor a test to

your specific requirements by defining test duration in a number of

waveforms, setting a violation threshold that must be met before

considering a test a failure, counting hits with statistical information, and

setting actions upon violations, test failure, and test complete.

Designed to make your work easier

Large, high-resolution touchscreen display

The MSO/DPO5000B Series features a 10.4 in. (264 mm) XGA color

display with an integrated touch screen for seeing intricate signal details.

High resolution display quality with touch screen, mouse and stylus operation.

Dedicated front panel controls

Per-channel vertical controls provide simple and intuitive operation. No

longer do you need to share one set of vertical controls across all four

channels.

Floating licenses

Floating licenses offer an alternative method to manage your Tektronix

asset. Floating licenses allow license-key enabled options to be easily

moved among all your MSO/DPO5000, DPO7000, and DPO/DSA/

MSO70000 Series of Tektronix oscilloscopes. Floating licenses are

available for many license-key enabled options. To order a floating version

of an option license add “DPOFL-“ prefix to the option name. (e.g. DPOFL-

ET3)

Check www.tektronix.com for additional information about floating license

options.

Easy data storage

Two USB 2.0 host ports on the front panel enable easy transfer of

screenshots, instrument settings, and waveform data to a USB flash drive.

The rear panel contains four additional USB 2.0 host ports and a USB

device port for controlling the oscilloscope remotely from a PC or for

connecting USB peripherals. An integrated 10/100/1000BASE-T Ethernet

port enables easy connection to networks and a Video Out port to drive an

external monitor or projector. A standard ≥ 480 GB removable solid state

disk drive makes customizing settings for different users easy and enables

use in secure environments.

Connectivity and remote operation

There are many ways to connect to your MSO/DPO5000B Series

oscilloscope to conduct extended analysis. The first makes use of the

Windows Remote Desktop capability – connect directly to your oscilloscope

and operate the user interface remotely through the built-in Remote

Desktop. A second way to connect is through Tektronix OpenChoice®

software which makes use of the fast embedded bus, transferring

waveform data directly from acquisition to analysis applications on the

Windows desktop at much faster speeds than conventional GPIB transfers.

Industry-standard protocols, such as TekVISA™ interface and ActiveX

controls are included for using and enhancing Windows applications for

data analysis and documentation. IVI-COM instrument drivers are included

to enable easy communication with the oscilloscope using GPIB, serial

data, and LAN connections from programs running on the instrument or an

external PC. Or, use the Software Developer's Kit (SDK) to help create

custom software to automate multistep processes in waveform collection

and analysis with Visual BASIC, C, C++, MATLAB, LabVIEW,

LabWindows/CVI, and other common Application Development

Environments (ADE). Microsoft® Excel and Word toolbars are included to

simplify data capture and transfer directly to these programs running on the

Windows desktop.

Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series

www.tektronix.com 9

Tektronix Mid-range Oscilloscopes

Need more performance or have other application needs? Consider the

MDO/MSO/DPO4000 series or the DPO7000 series.

For more performance, the DPO7000C series offers:

500 MHz to 3.5 GHz bandwidth

Up to 40 GS/s sampling rate

Up to 500 M point record length

1 % accuracy

More analysis and compliance support for higher data rates

Microsoft Windows 7

For mixed-domain analysis or greater portability, the MDO/MSO/

DPO4000B series offers:

100 MHz to 1 GHz bandwidth

Up to 5 GS/s sampling

Up to 20 M point record length

Serial data trigger and decode

Built-in 3 GHz or 6 GHz spectrum analyzer (MDO models)

2 or 4 analog channels and 16 digital channels (MSO and MDO

models)

Datasheet

10 www.tektronix.com

Specifications

All specifications apply to all models unless noted otherwise.

Model overview

MSO5034B

DPO5034B

MSO5054B

DPO5054B

MSO5104B

DPO5104B

MSO5204B

DPO5204B

Input Channels 4

Bandwidth 350 MHz 500 MHz 1 GHz 2 GHz

Rise Time (Calculated) 1 ns 700 ps 350 ps 175 ps

DC Gain Accuracy ±1.5%, derated at 0.10%/°C above 30 °C

Bandwidth Limits Depending on instrument model: 1 GHz, 500 MHz, 350 MHz, 250 MHz, and 20 MHz

Effective Number of Bits (Typical) 6 bits (10 divisionp-p sine wave input at instrument bandwidth, 100 mV/div, 50 Ω Input Impedance, maximum sample rate, 1 k

point record length)

Random Noise (RMS, typical, sample mode, full BW)

1 MΩ ≤(130 μV + 8.0% of V/div

setting)

≤(130 μV + 8.0% of V/div

setting)

≤(150 μV + 8.0% of V/div

setting)

≤(180 μV + 8.0% of V/div

setting)

50 Ω ≤(130 μV + 8.0% of V/div

setting)

≤(130 μV + 8.0% of V/div

setting)

≤(75 μV + 6.0% of V/div

setting)

≤(150 μV + 6.0% of V/div

setting)

Maximum Sample Rate (All channels) 5 GS/s 5 GS/s 5 GS/s 5 GS/s

Maximum Sample Rate (1 or

2 channels)

– – 10 GS/s 10 GS/s

Maximum Equivalent Time Sampling

Rate

400 GS/s

Maximum Record Length with

Standard Configuration

25 M 25 M (4 ch)

50 M (1 or 2 ch)

Maximum Record Length with Option

5RL

50 M 50 M (4 ch)

125 M (1 or 2 ch)

Maximum Record Length with Option

10RL

125 M 125 M (4 ch)

250 M (1 or 2 ch)

Vertical system analog channels

Input coupling AC, DC

Input resistance 1 MΩ ±1%, 50 Ω ±1%

Input sensitivity range 1 MΩ: 1 mV/div to 10 V/div

50 Ω: 1 mV/div to 1 V/div

Vertical resolution 8 bits (>11 bits with Hi Res)

Maximum input voltage, 1 MΩ 300 VRMS CAT II, with peaks ≤ ±425 V

For <100 mV/div derate at 20 dB/decade above 100 kHz to 30 VRMS at 1 MHz, 10 dB/decade above 1 MHz

For ≥100 mV/div derate at 20 dB/decade above 3 MHz to 30 VRMS at 30 MHz, 10 dB/decade above 30 MHz

Maximum input voltage, 50 Ω 5 VRMS, with peaks ≤ ±20 V

Position range ±5 divisions

Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series

www.tektronix.com 11

Delay between any Two Channels

(Typical)

≤100 ps (50 Ω, DC coupling and equal V/div at or above 10 mV/div)

Offset range

1 mV/div - 50 mV/div 1 MΩ: ±1 V

50 Ω: ±1 V

50.5 mV/div - 99.5 mV/div 1 MΩ: ±0.5 V

50 Ω: ±0.5 V

100 mV/div - 500 mV/div 1 MΩ: ±10 V

50 Ω: ±10 V

505 mV/div - 995 mV/div 1 MΩ: ±5 V

50 Ω: ±5 V

1 V/div - 5 V/div 1 MΩ: ±100 V

50 Ω: ±5 V

5.05 V/div - 10 V/div 1 MΩ: ±50 V

50 Ω: NA

Offset Accuracy ±(0.005 × |offset – position| + DC Balance)

Note: Both position and constant offset term must be converted to volts by multiplying by the appropriate volts/div term

Channel-to-channel isolation (Any

two channels at equal vertical

scale settings) (typical)

≥100:1 at ≤100 MHz and ≥30:1 at >100 MHz up to the rated BW

Vertical system digital channels

Input Channels 16 Digital (D15 - D0)

Thresholds Per-channel Thresholds

Threshold Selections TTL, ECL, User

User-defined Threshold Range ±40 V

Threshold Accuracy ±(100 mV + 3% of threshold setting)

Maximum Input Voltage ±42 Vpeak

Input Dynamic Range 30 Vp-p ≤200 MHz

10 Vp-p >200 MHz

Minimum Voltage Swing 400 mV

Input Impedance 100 kΩ

Probe Loading 3 pF

Vertical Resolution 1 bit

Datasheet

Vertical system analog channels

12 www.tektronix.com

Horizontal system analog channels

Maximum Duration at Highest

Real-Time Sample Rate

25 ms

Time Base Range 12.5 ps/div to 1000 s/div

Time resolution (in ET/IT mode) 2.5 ps/div

Time base delay time range –10 divisions to 1000 s

Channel-to-channel deskew range ±75 ns

Time base accuracy ±5 ppm over any ≥1 ms interval

Horizontal system digital channels

Maximum Sample Rate (Main) 500 MS/s (2 ns resolution)

Maximum record length (main) 25 M Standard

Up to 40 M with Record Length options

Maximum sample rate (MagniVu) 16.5 GS/s (60.6 ps resolution)

Maximum record length (MagniVu) 10k points centered around the trigger

Minimum detectable pulse width 1 ns

Channel-to-channel skew (typical) 200 ps

Maximum input toggle rate 500 MHz at minimum input swing; higher toggle rates can be achieved at higher amplitudes

Trigger system

Main trigger modes Auto, Normal, and Single

Trigger coupling DC, AC, HF Rej (attenuates >50 kHz), LF Rej (attenuates <50 kHz), Noise Reject (reduces sensitivity)

Trigger holdoff range 250 ns to 8 s

Enhanced triggering User-selectable; corrects the difference in timing between the trigger path and the acquired data (not available in FastAcq)

Trigger jitter ≤100 fsRMS using Enhanced Trigger

≤10 psRMS without Enhanced Trigger and in Fast Acq mode

≤100 psRMS for non-Edge-type trigger modes

Trigger sensitivity

Internal DC coupled For 1 MΩ: 1 mV/div to 4.98 mV/div: 0.75 div from DC to 50MHz, increasing to 1.3 div at instrument bandwidth ≥5 mV/div: 0.40 div

from DC to 50 MHz, increasing to 1 div at instrument bandwidth

For 50 Ω (MSO5204, DPO5204, MSO5104, DPO5104): 0.40 div from DC to 50 MHz, increasing to 1 div at instrument bandwidth

For 50 Ω (MSO5054, DPO5054, MSO5034, DPO5034): 1 mV/div to 4.98 mV/div: 0.75 div from DC to 50MHz, increasing to 1.3 div

at instrument bandwidth ≥5 mV/div: 0.40 div from DC to 50 MHz, increasing to 1 div at instrument bandwidth

External (auxiliary input) 1 MΩ 200 mV from DC to 50 MHz, increasing to 500 mV at 250 MHz

Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series

www.tektronix.com 13

Trigger level range

Any channel ±8 divisions from center of screen

External (auxiliary input) ±8 V

Line Fixed at about 50% of line voltage

Trigger modes

Edge Positive or negative slope on any channel or front-panel auxiliary input. Coupling includes DC, AC, HF reject, LF reject, and noise

reject

Glitch Trigger on or reject glitches of positive, negative, or either polarity. Programmable glitch width is 4 ns minimum to 8 s maximum

Runt Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again

Width Trigger on width of positive or negative pulse either within or outside selectable limits (4 ns to 8 s)

Timeout Trigger on an event which remains high, low, or either, for a specified time period (4 ns to 8 s)

Transition Trigger on pulse edge rates that are faster or slower than specified. Slope may be positive, negative, or either

Setup/Hold Trigger on violations of both setup time and hold time between clock and data present on any two input channels

Pattern Trigger when any logical pattern of signals goes false or stays true for specified period of time (4 ns to 1 s). Pattern (AND, OR,

NAND, NOR) specified for all analog and digital input channels defined as High, Low, or Don't Care

Parallel Bus Trigger on specified data value on defined parallel bus

State Any logical pattern of analog channels and digital channels (MSO models) clocked by edge on another channel. Trigger on rising

or falling clock edge

Video Any logical pattern of analog channels and digital channels (MSO models) clocked by edge on another channel. Trigger on rising

or falling clock edge

Trigger Sequences Main, Delayed by Time, Delayed by Events. All sequences can include separate horizontal delay after the trigger event to position

the acquisition window in time

A/B Sequence Event Trigger

Types

Edge

Trigger Delay by Time 4 ns to 8 s

Trigger Delay by Events 1 to 4,000,000 events

Visual Trigger Trigger on up to 8 user-specified areas, including rectangle, triangle, trapezoid, hexagon, and user-specified shapes on any of the

analog channels

I2C (Optional) Provided as part of Opt. SR-EMBD. Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or Address

and Data on I2C buses up to 10 Mb/s

SPI (Optional) Provided as part of Opt. SR-EMBD. Trigger on Slave Select, Idle Time, or Data (1-16 words) on SPI buses up to 10 Mb/s

CAN (Optional) Provided as part of Opt. SR-AUTO. Trigger on Start of Frame, Type of Frame (Data, Remote, Error, or Overload), Identifier, Data,

Identifier and Data, EOF, Missing Ack, Bit Stuff Error, and CRC Error on CAN buses up to 1 Mb/s

LIN (Optional) Provided as part of Opt. SR-AUTO. Trigger on Sync, Identifier, Data, Identifier and Data, Wakeup Frame, Sleep Frame, and Error

on LIN buses up to 1 Mb/s

FlexRay (Optional) Provided as part of Opt. SR-AUTO. Trigger on Indicator Bits (Normal, Payload, Null, Sync, Startup), Cycle Count, Header Fields

(Indicator Bits, Identifier, Payload Length, Header CRC, and Cycle Count), Identifier, Data, Identifier and Data, End Of Frame, and

Error on FlexRay buses up to 10 Mb/s

MIL-STD-1553 (Optional) Provided as part of Opt. SR-AERO. Trigger on Sync, Command Word, Status Word, Data Word, Idle Time, and Error on MIL-

STD-1553 buses up to 1 Mb/s

Ethernet (Optional) Provided as part of Opt. SR-ENET. Trigger on Start of Packet, MAC Address, MAC Q-tag, MAC Length/Type, MAC Data, IP

Header, TCP Header,

TCP/IPV4 Data, End of Packet, and FCS(CRC) Error on 10BASE-T and 100BASE-TX buses.

RS-232/422/485/UART

(Optional)

Provided as part of Opt. SR-COMP. Trigger on Start Bit, End of Packet, Data, and Parity Error up to 10 Mb/s

Datasheet

Trigger system

14 www.tektronix.com

USB 2.0 Low Speed:

(Optional)

Provided as part of Opt. SR-USB.

Trigger on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special

Packet, Error.

Token Packet Trigger – Any token type, SOF, OUT, IN, SETUP; Address can be specified for Any, OUT, IN, and SETUP token

types. Address can be further specified to trigger on ≤, <, =, >, ≥, != a particular value, or inside or outside a range. Frame number

can be specified for SOF token using Binary, Hex, Unsigned Decimal, and Don't Care digits.

Data Packet Trigger – Any data type, DATA0, DATA1; Data can be further specified to trigger on ≤, <, =, >, ≥, != a particular data

value, or inside or outside a range.

Handshake Packet Trigger – Any handshake type, ACK, NAK, STALL.

Special Packet Trigger – Any special type, Reserved.

Error Trigger – PID Check, CRC5 or CRC16, Bit Stuffing.

USB 2.0 Full Speed: (Optional) Provided as part of Opt. SR-USB.

Trigger on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special

Packet, Error.

Token Packet Trigger – Any token type, SOF, OUT, IN, SETUP; Address can be specified for Any, OUT, IN, and SETUP token

types. Address can be further specified to trigger on ≤, <, =, >, ≥, != a particular value, or inside or outside a range. Frame number

can be specified for SOF token using Binary, Hex, Unsigned Decimal, and Don't Care digits.

Data Packet Trigger – Any data type, DATA0, DATA1; Data can be further specified to trigger on ≤, <, =, >, ≥, != a particular data

value, or inside or outside a range.

Handshake Packet Trigger – Any handshake type, ACK, NAK, STALL.

Special Packet Trigger – Any special type, PRE, Reserved.

Error Trigger – PID Check, CRC5 or CRC16, Bit Stuffing.

USB 2.0 High Speed:

(Optional)

Provided as part of Opt. SR-USB.

Trigger on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special

Packet, Error.

Token Packet Trigger – Any token type, SOF, OUT, IN, SETUP; Address can be specified for Any, OUT, IN, and SETUP token

types. Address can be further specified to trigger on ≤, <, =, >, ≥, != a particular value, or inside or outside a range. Frame number

can be specified for SOF token using Binary, Hex, Unsigned Decimal, and Don't Care digits.

Data Packet Trigger – Any data type, DATA0, DATA1, DATA2, DATAM; Data can be further specified to trigger on ≤, <, =, >, ≥, !=

a particular data value, or inside our outside a range.

Handshake Packet Trigger – Any handshake type, ACK, NAK, STALL, NYET.

Special Packet Trigger – Any special type, ERR, SPLIT, PING, Reserved. SPLIT packet components that can be specified include:

Hub Address

Start/Complete – Don't Care, Start (SSPLIT), Complete (CSPLIT) Port Address

Start and End bits – Don't Care, Control/Bulk/Interrupt (Full-speed Device, Low-speed Device), Isochronous (Data is Middle, Data

is End, Data is Start, Data is All)

Endpoint Type – Don't Care, Control, Isochronous, Bulk, Interrupt

Error Trigger – PID Check, CRC5, CRC16, Any.

Note: USB 2.0 High-speed triggering, decoding, and search only available on 1 GHz and 2 GHz models.

Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series

Trigger system

www.tektronix.com 15

Acquisition system

Acquisition modes

Sample Acquire sampled values

Peak detect Captures narrow glitches as narrow as 100 ps (2 GHz and 1 GHz models) or 200 ps (500 MHz and 350 MHz models) at all real-

time sampling rates

Averaging From 2 to 10,000 waveforms included in average

Envelope Min-Max envelope reflecting Peak Detect data over multiple acquisitions

Hi-Res Real-time boxcar averaging reduces random noise and increases resolution

Roll mode Scrolls sequential waveform points across the display in a right-to-left rolling motion at sweep speeds slower than 50 ms/div. Up to

20 MS/s with a maximum record length of 10 M

FastAcq®FastAcq optimizes the instrument for analysis of dynamic signals and capture of infrequent events

Maximum FastAcq waveform

capture rate

>250,000 wfms/s on all 4 channels simultaneously

Waveform database Accumulate waveform database providing three-dimensional array of amplitude, time, and counts

FastFrame®Acquisition memory divided into segments; maximum trigger rate >310,000 waveforms per second. Time of arrival recorded with

each event. Frame finder tool helps to visually identify transients

Automated Search and Mark Automatically mark events and document waveforms. Search positive/negative slopes or both, glitches, runts, pulse widths,

transition rate, setup and hold, timeout, windows, or find any logic or state pattern, up to 8 different event types on any of the

4 analog channels. Search DDR Read or Write bursts with Opt. DDRA. Event table summarizes all found events. All events are

time stamped in reference to trigger position. Stop acquisitions when an event is found

Waveform analysis

Waveform measurements

Cursors Waveform and Screen

Automatic measurements 53, of which 8 can be displayed on-screen at any one time. Measurements include: Period, Frequency, Delay, Rise Time, Fall

Time, Positive Duty Cycle, Negative Duty Cycle, Positive Width, Negative Width, Burst Width, Phase, Positive Overshoot, Negative

Overshoot, Peak-to-Peak, Amplitude, High, Low, Maximum, Minimum, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area

Eye-pattern measurements Extinction Ratio (absolute, %, dB), Eye Height, Eye Width, Eye Top, Eye Base, Crossing %, Jitter (p-p, RMS, 6sigma), Noise (p-p,

RMS), Signal/Noise Ratio, Cycle Distortion, Q-Factor

Measurement statistics Mean, Minimum, Maximum, Standard Deviation

Reference levels User-definable reference levels for automatic measurements can be specified in either percent or units

Gating Isolate the specific occurrence within an acquisition to take measurements on, using either screen or waveform cursors

Waveform histogram A waveform histogram provides an array of data values representing the total number of hits inside a user-defined region of the

display. A waveform histogram is both a visual graph of the hit distribution and a numeric array of values that can be measured.

Sources – Channel 1, Channel 2, Channel 3, Channel 4, Ref 1, Ref 2, Ref 3, Ref 4,Math 1,Math 2,Math 3,Math 4

Types – Vertical, Horizontal

Waveform histogram

measurements

Waveform Count, Hits in Box, Peak Hits, Median, Maximum, Minimum, Peak-to-Peak, Mean (μ), Standard Deviation (sigma),

μ +1sigma, μ +2sigma, μ +3sigma

Waveform processing/math

Arithmetic Add, Subtract, Multiply, Divide waveforms and scalars

Algebraic expressions Define extensive algebraic expressions including waveforms, scalars, user-adjustable variables, and results of parametric

measurements. Perform math on math using complex equations. e.g. (Integral (CH1 – Mean(CH1)) × 1.414 × VAR1)

Math functions Average, Invert, Integrate, Differentiate, Square Root, Exponential, Log10, Log e, Abs, Ceiling, Floor, Min, Max, Sin, Cos, Tan,

ASin, ACos, ATan, Sinh, Cosh, Tanh

Relational Boolean result of comparison >, <, ≥, ≤, ==, !=

Frequency domain functions

(FFT)

Spectral Magnitude and Phase, Real and Imaginary Spectra

FFT vertical units Magnitude: Linear, dB, dBm

Phase: Degrees, radians, group delay

Datasheet

16 www.tektronix.com

FFT window functions Rectangular, Hamming, Hanning, Kaiser-Bessel, Blackman-Harris, Gaussian, Flattop2, Tek Exponential

Waveform definition As an arbitrary math expression

Filtering functions User-definable filters. Users specify a filter containing the coefficients of the filter. Filter files provided

Custom math functions Custom MATLAB and .NET plug-ins can be included in the math waveform definition

Mask function A function that generates a waveform database pixmap from a sample waveform. Sample count can be defined

Software

IVI driver Provides a standard instrument programming interface for common applications such as LabVIEW, LabWindows/CVI,

Microsoft .NET and MATLAB. IVI-COM standard

LXI Class C web interface Connect to the MSO/DPO5000B Series through a standard Web browser by simply entering the oscilloscope's IP address in the

address bar of the browser. The web interface enables viewing of instrument status and configuration, as well as status and

modification of network settings. All web interaction conforms to LXI Class C specification

Display system

Display type 10.4 in. (264 mm) liquid-crystal active-matrix color display with touch screen

Display resolution 1024 horizontal × 768 vertical pixels (XGA)

Waveform styles Vectors, dots, variable persistence, infinite persistence

Color palettes Normal, green, gray, temperature, spectral, and user defined

Display format YT, XY

Computer system

Operating system Windows 7 Ultimate 64-bit

Instrument operation verified with version 1.1 of the National Institute of Standards and Technology (NIST) DSS Baseline

Requirements, also known as the United States Government Configuration Baseline (USGCB)

CPU Intel Core 2 Duo, ≥2 GHz processor

PC system memory ≥4 GB

Solid state disk drive Removable solid state disk drive, ≥480 GB

Mouse Optical wheel mouse, USB interface

Keyboard Order 119-7083-xx for small keyboard; USB interface and hub

Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series

Waveform analysis

www.tektronix.com 17

Input output ports

USB 2.0 High-speed host ports Supports USB mass storage devices, printers, keyboard, and mouse. Two ports on front and four ports on rear of instrument. Can

be disabled individually

USB 1.1 Full-speed device port Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB (with a TEK-USB-488 adapter)

LAN port RJ-45 connector, supports 10/100/1000BASE-T

Video out port DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector. Support for extended

desktop and clone mode

Audio ports Miniature phono jacks

Keyboard port PS/2 compatible

Mouse port PS/2 compatible

Auxiliary input Front-panel BNC connector. Input impedance 1 MΩ. Max input 300 VRMS with peaks ≤ ±425 V

Auxiliary out (software switchable) Trigger Out: A TTL compatible pulse when the oscilloscope triggers

Time Base Reference Out: A TTL compatible output of internal 10 MHz reference oscillator

External reference in Time base system can phase lock to an external 10 MHz reference (10 MHz ±1%)

Probe compensator output Front-panel pins

Amplitude: 2.5 V

Frequency: 1 kHz

LAN eXtensions for

Instrumentation (LXI)

Class: LXI Class C Version: 1.3

Optional TekVPI® external power

supply

Required when total oscilloscope probe power usage exceeds 15 W.

Output Voltage 12 V

Output Current 5 A

Power Consumption 50 W

Power source

Power source voltage 100 to 240 V ±10%

Power source frequency 45 Hz to 66 Hz (85 to 264 V)

360 Hz to 440 Hz (100 to 132 V)

Power consumption 275 W maximum

Datasheet

18 www.tektronix.com

Physical characteristics

Dimensions mm in.

Height 233 9.16

Width 439 17.29

Depth 206 8.12

Weight kg lb.

Net 6.7 14.9

Shipping 12.5 27.5

Rackmount configuration 5U

Cooling clearance in. mm

Top 0 0

Bottom 0 0

Left Side 2 51

Right Side 0 0

Front 0 0

Rear 2 51

EMC environmental and safety

Temperature

Operating 0 °C to +50 °C

Nonoperating –20 °C to +60 °C

Humidity

Operating 8% to 90% relative humidity with a maximum wet-bulb temperature of 29 °C at or below +50 °C (upper limit de-rates to 20.6%

relative humidity at +50 °C). Noncondensing

Nonoperating 5% to 98% relative humidity with a maximum wet-bulb temperature of 40 °C at or below +60 °C (upper limit de-rates to 29.8%

relative humidity at +60 °C). Noncondensing

Altitude

Operating 3,000 m (9,843 ft.)

Nonoperating 9,144 m (30,000 ft.)

Regulatory

Electromagnetic compatibility 2004/108/EC

Certifications UL61010-1; CSA61010-1, EN61010-1; IEC 61010-1

Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series

www.tektronix.com 19

Ordering information

DPO5000B models

DPO5034B 350 MHz, 5 GS/s, 25 M record length, 4-channel digital phosphor oscilloscope

DPO5054B 500 MHz, 5 GS/s, 25 M record length, 4-channel digital phosphor oscilloscope

DPO5104B 1 GHz, 10/5 GS/s (2/4 ch), 50 M/25 M record length, 4-channel digital phosphor oscilloscope

DPO5204B 2 GHz, 10/5 GS/s (2/4 ch), 50 M/25 M record length, 4-channel digital phosphor oscilloscope

MSO5000B models

MSO5034B 350 MHz, 5 GS/s, 25 M record length, 4+16 channel mixed signal oscilloscope

MSO5054B 500 MHz, 5 GS/s, 25 M record length, 4+16 channel mixed signal oscilloscope

MSO5104B 1 GHz, 10/5 GS/s (2/4 ch), 50 M/25 M record length, 4+16 channel mixed signal oscilloscope

MSO5204B 2 GHz, 10/5 GS/s (2/4 ch), 50 M/25 M record length, 4+16 channel mixed signal oscilloscope

Standard accessories

TPP0500/B One passive voltage probe per analog channel (500 MHz, 10X, 3.9 pF) for 500 MHz and 350 MHz models

TPP1000 One passive voltage probe per analog channel (1 GHz, 10X, 3.9 pF) for 2 GHz and 1 GHz models

200-5130-xx Front cover

119-6107-xx Touch-screen stylus

071-298x-xx User Manual (please specify language when ordering)

—Advanced Search and Mark, DPOJET Essentials, Visual Trigger and Search, Limit Test, and SR-CUST Custom serial analysis

license all included standard

—Accessory pouch

—Mouse

—Calibration Certificate documenting measurement traceability to National Metrology Institute(s), Z 540-1 Compliance and ISO9001

—Power Cord (please specify power plug option when ordering)

—One-year warranty

P6616 16-channel logic probe for MSO Models

020-2662-xx Logic probe accessory kit for MSO Models

Datasheet

20 www.tektronix.com

Options

Record length options Option MSO5034B

DPO5034B

MSO5054B

DPO5054B

MSO5104B

DPO5104B

MSO5204B

DPO5204B

Opt. 5RL 50 M/Ch 125 M max, 50 M/Ch

Opt. 10RL 125 M/Ch 250 M max, 125 M/Ch

Advanced analysis options

Option Description

Opt. BRR BroadR-Reach Compliance Testing (Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture)

Opt. DDRA DDR Memory bus analysis (Requires Opt. DJA) (Available on 1 GHz and 2 GHz models only.)

Opt. DJA Jitter and Eye Analysis Tools – Advanced (DPOJET)

Opt. ET3 Ethernet compliance test (Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture)

Opt. HSIC USB HSIC protocol decode and electrical validation (Requires Opt. DJA) (Available on 2 GHz models only.)

Opt. MOST MOST Essentials – Electrical compliance and debug test solution for MOST50 and MOST150 (Requires Opt. DJA)

Opt. MTM Mask testing

– ITU-T (64 Kb/s to 155 Mb/s)

– ANSI T1.102 (1.544 Mb/s to 155 Mb/s)

– Ethernet IEEE 802.3, ANSI X3.263 (125 Mb/s to

1.25 Gb/s)

– SONET/SDH (51.84 Mb/s to 622 Mb/s)

– Fibre Channel (133 Mb/s to 2.125 Gb/s)

– Fibre Channel Electrical (133 Mb/s to 1.06 Gb/s)

– USB (12 Mb/s to 480 Mb/s)

– IEEE 1394b (491.5 Mb/s to 1.966 Gb/s)

– Rapid I/O Serial (up to 1.25 Gb/s)

– Rapid I/O LP-LVDS (500 Mb/s to 1 Gb/s)

– OIF Standards (1.244 Gb/s)

– CPRI, V4.0 (1.228 Gb/s)

– Video (143.18 Mb/s to 360 Mb/s)

Opt. PWR Power measurement and analysis

Opt. SR-AERO Aerospace serial triggering and analysis (MIL-STD-1553).

Enables triggering on packet-level information on MIL-STD-1553 buses and analytical tools such as bus views, packet decoding, search tools,

and packet decode tables with time stamp information.

Signal Inputs – Any Ch1 - Ch4

Recommended probing – Differential

Opt. SR-AUTO Automotive serial triggering and analysis (CAN/LIN/FlexRay).

Enables triggering on packet-level information on CAN, LIN, and FlexRay buses and analytical tools such as digital views of the signal, bus views,

packet decoding, search tools, and packet decode tables with time stamp information.

Signal Inputs – Any Ch1 - Ch4 (and any D0 - D15 on MSO models)

Recommended probing – LIN: single-ended; CAN/FlexRay: differential

Opt. SR-COMP Computer serial triggering and analysis (RS-232/422/485/UART)

Enables triggering on packet-level information on RS-232/422/485/UART buses and analytical tools such as digital views of the signal, bus views,

packet decoding, search tools, and packet decode tables with time stamp information.

Signal Inputs – Any Ch1 - Ch4 (and any D0 - D15 on MSO models)

Recommended probing – RS-232/UART: single ended; RS-422/485: differential

Opt. SR-DPHY MIPI® D-PHY serial analysis.

Enables analysis of MIPI DSI-1 and CSI-2 buses with analytical tools such as digital views of the signal, bus views, packet decoding, search

tools, and packet decode tables with time stamp information.

Signal Inputs – Any Ch1 - Ch4

Recommended probing – Differential

Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series

www.tektronix.com 21

Option Description

Opt. SR-EMBD Embedded serial triggering and analysis (I2C, SPI)

Enables triggering on packet-level information on I2C and 2-wire and 3-wire SPI buses and analytical tools such as digital views of the signal, bus

views, packet decoding, search tools, and packet decode tables with time stamp information.

Signal Inputs – I2C: Any Ch1 - Ch4 (and any D0 - D15 on MSO models); SPI: Any Ch1 - Ch4 (and any D0 - D15 on MSO models)

Recommended probing – I2C, SPI: single ended

Opt. SR-ENET Ethernet serial triggering and analysis (10BASE-T, 100BASE-TX)

Enables triggering on packet-level information on Ethernet buses as well as analytical tools such as bus views, packet decoding, search tools,

and packet decode tables with time stamp information.

Signal Inputs – Any Ch1 - Ch4.

Recommended probing – Differential

Opt. SR-USB USB 2.0 serial triggering and analysis (LS, FS, HS)

Enables triggering on packet-level content for low-speed, full-speed, and high-speed USB serial buses. Also enables analytical tools such as bus

views, packet decoding, search tools, and packet decode tables with time stamp information for low-speed, full-speed, and high-speed USB serial

buses.

Signal Inputs – Low-speed and Full-speed: Any Ch1 - Ch4 (and any D0 - D15 on MSO models) for single ended, Any Ch1 - Ch4 for differential;

High-speed: Any Ch1 - Ch4

Recommended probing – Low-speed and Full-speed: Single ended or differential; High-speed: Differential (USB high-speed supported only on

MSO5204, DPO5204, MSO5104, and DPO5104 models.)

Opt. SVE SignalVu® Essentials – Vector signal analysis software

Opt. USB USB 2.0 Compliance testing (Requires TDSUSBF USB Test Fixture. 2 GHz bandwidth required for high-speed USB)

Opt. USBPWR Automated compliance test solution for USB power adapters

Opt. VNM CAN/LIN Protocol analysis software

Bundle options

These bundled items must be purchased at the same time as the instrument purchase.

Option Description

Opt. PS2 Power Solution Bundle: DPOPWR, THDP0200, TCP0030A, 067-1686-xx (Deskew fixture)

Opt. PS3 Power Solution Bundle: DPOPWR, TMDP0200, TCP0020, 067-1686-xx (Deskew fixture)

Floating options

Floating licenses offer an alternative method to manage your Tektronix asset. Floating licenses allow license-key enabled options to be easily moved among all your MSO/

DPO5000, DPO7000, and DPO/DSA/MSO70000 Series Tektronix oscilloscopes. Floating licenses are available for the following license-key enabled options.

Check http://www.tek.com/products/oscilloscopes/floatinglicenses for additional information about floating license options.

Option Description

DPOFL-BRR BroadR-Reach Compliance Testing (Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture)

DPOFL-DDRA DDR Memory bus analysis (Requires Opt. DJA) (Available on 1 GHz and 2 GHz models only)

DPOFL-DJA Jitter and Eye Analysis Tools – Advanced (DPOJET)

DPOFL-ET3 Ethernet compliance testing (Requires TF-GBE-BTP or TF-GBE-ATP Ethernet test fixture.)

DPOFL-HSIC USB HSIC protocol decode and electrical validation (Requires Opt. DJA) (Available on 2 GHz models only)

DPOFL-MOST MOST Essentials – Electrical compliance and debug test solution (MOST50, MOST150) (Requires Opt. DJA)

DPOFL-MTM Mask testing

DPOFL-PWR Power measurement and analysis

DPOFL-SR-AERO Aerospace serial triggering and analysis (MIL-STD-1553)

DPOFL-SR-AUTO Automotive serial triggering and analysis (CAN/LIN/FlexRay)

DPOFL-SR-COMP Computer serial triggering and analysis (RS-232/422/485/UART)

DPOFL-SR-DPHY MIPI® D-PHY serial analysis

Datasheet

22 www.tektronix.com

Option Description

DPOFL-SR-EMBD Embedded serial triggering and analysis (I2C, SPI)

DPOFL-SR-ENET Ethernet serial triggering and analysis (10BASE-T and 100BASE-TX)

DPOFL-SR-PCIE PCI Express serial analysis (Available on ≥1 GHz models only) (Due to large volumes of data, use of standard high-capacity hard

drive rather than smaller SSD is recommended)

DPOFL-SR-USB USB 2.0 serial triggering and analysis (LS, FS, HS)

DPOFL-SR-810B 8b/10b serial analysis

DPOFL-SVA SignalVu® AM/FM/PM/Direct Audio measurements (Requires Opt. SVE)

DPOFL-SVE SignalVu® Essentials – Vector signal analysis software

DPOFL-SVM SignalVu® General purpose modulation analysis (Requires Opt. SVE)

DPOFL-SVP SignalVu® Pulse – Advanced signal analysis (Requires Opt. SVE)

DPOFL-SVT SignalVu® Settling time measurements (Requires Opt. SVE)

DPOFL-USB USB 2.0 Compliance testing (Requires TDSUSBF USB Test Fixture. 2 GHz bandwidth required for high-speed USB)

DPOFL-USBPWR Automated compliance test solution for USB power adapters

DPOFL-VNM CAN/LIN Protocol analysis software

Power plug options

Opt. A0 North America power plug (115 V, 60 Hz)

Opt. A1 Universal Euro power plug (220 V, 50 Hz)

Opt. A2 United Kingdom power plug (240 V, 50 Hz)

Opt. A3 Australia power plug (240 V, 50 Hz)

Opt. A5 Switzerland power plug (220 V, 50 Hz)

Opt. A6 Japan power plug (100 V, 110/120 V, 60 Hz)

Opt. A10 China power plug (50 Hz)

Opt. A11 India power plug (50 Hz)

Opt. A12 Brazil power plug (60 Hz)

Opt. A99 No power cord

Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series

www.tektronix.com 23

User manual options

Opt. L0 English manual

Opt. L1 French manual

Opt. L3 German manual

Opt. L5 Japanese manual

Opt. L7 Simplified Chinese manual

Opt. L8 Traditional Chinese manual

Opt. L9 Korean manual

Opt. L10 Russian manual

Opt. L99 No manual

Service options

Opt. C3 Calibration Service 3 Years

Opt. C5 Calibration Service 5 Years

Opt. D1 Calibration Data Report

Opt. D3 Calibration Data Report 3 Years (with Opt. C3)

Opt. D5 Calibration Data Report 5 Years (with Opt. C5)

Opt. G3 Complete Care 3 Years (includes loaner, scheduled calibration, and more)

Opt. G5 Complete Care 5 Years (includes loaner, scheduled calibration, and more)

Opt. R3 Repair Service 3 Years (including warranty)

Opt. R5 Repair Service 5 Years (including warranty)

Probes and accessories are not covered by the oscilloscope warranty and Service Offerings. Refer to the datasheet of each probe and accessory model for its unique warranty

and calibration terms.

Upgrade options

To upgrade your MSO/DPO5000B Series oscilloscope, order DPO-UP and an option listed below. For example, DPO-UP DDRA.

To upgrade record length:

RL25E From standard 25 M/channel configuration to Opt. 5RL configuration

RL210E From standard 25 M/channel configuration to Opt. 10RL configuration

RL510E From Opt. 5RL configuration to Opt. 10RL configuration

To add a solid state hard disk

drive:

SSDE Add an additional removable solid state drive (customer installable)

To upgrade MSO/DPO5000B Series

with:

BRR Add Opt. BRR - BroadR-Reach Compliance Testing (Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture)

DDRA Add Opt. DDRA (Requires Opt. DJA.) (Available on 1 GHz and 2 GHz models only)

DJAE Add Opt. DJA – Jitter and Eye Analysis Tools - Advanced (DPOJET)

ET3 Add Opt. ET3 – Ethernet Compliance Testing (Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture)

HSIC Add Opt. HSIC - USB HSIC protocol decode and electrical validation (Available on 2 GHz models only) (Requires Opt. DJA)

Datasheet

24 www.tektronix.com

MOST Add Opt. MOST – MOST Essentials - Electrical Compliance and Debug Test Solution (MOST50, MOST150) (Requires Opt. DJA)

MTM Add Opt. MTM – Mask Testing

PWR Add Opt. PWR – Power Measurement and Analysis

SR-AERO Add Opt. SR-AERO – Aerospace Serial Triggering and Analysis (MIL-STD-1553)

SR-AUTO Add Opt. SR-AUTO – Automotive Serial Triggering and Analysis (CAN/LIN/FlexRay)

SR-COMP Add Opt. SR-COMP – Computer Serial Triggering and Analysis (RS-232/422/485/UART)

SR-DPHY Add Opt. SR-DPHY – MIPI D-PHY Serial Analysis (DSI-1, CSI-2)

SR-EMBD Add Opt. SR-EMBD – Embedded Serial Triggering and Analysis (I2C, SPI)

SR-ENET Add Opt. SR-ENET – Ethernet Serial Triggering and Analysis (10BASE-T and 100BASE-TX)

SR-PCIE Add PCI Express Serial Analysis (Available on ≥1 GHz models only.)

SR-USB Add Opt. SR-USB – USB 2.0 Serial Triggering and Analysis (LS, FS, HS)

SR-810B Add 8b/10b Serial Analysis

SVA Add SignalVu AM/FM/Direct Audio Measurements (Requires Opt. SVE)

SVEE Add Opt. SVE – SignalVu Essentials - Vector Signal Analysis Software

SVM Add SignalVu General-purpose Modulation Analysis (Requires Opt. SVE)

SVP Add SignalVu Pulse - Advanced Signal Analysis (Requires Opt. SVE)

SVT Add SignalVu Settling Time Measurements - Frequency and Phase (Requires Opt. SVE)

USB Add Opt. USB – USB 2.0 Compliance Testing (Requires TDSUSBF USB Test Fixture) (2 GHz bandwidth required for high-speed

USB)

USBPWR Add Opt. USBPWR - Automated compliance test solution for USB power adapters

VNM Add Opt. VNM – CAN/LIN Serial Protocol Decode

To upgrade DPO5000B Series to

MSO:

MSOE Add 16 digital channels to a DPO5000B

Recommended accessories

Accessories

077-0076-xx Service manual (PDF only)

077-0010-xx Programmer manual (PDF only)

077-0063-xx Performance verification and specifications manual (PDF only)

TPA-BNC TekVPI-to-TekProbe BNC adapter

TEK-DPG Deskew Pulse Generator

TEK-USB-488 GPIB-to-USB adapter

HCTEK54 Hard transit case

RMD5000 Rackmount kit

119-7083-xx Mini keyboard (USB interface)

119-7275-xx Mini multimedia keyboard

119-7465-00 TekVPI external power supply – Required when probe power usage exceeds 15 W. Power cord not included. Specify power cord

when ordering.

119-7766-xx External DVD R/W drive

065-0952-xx Spare removable Solid State Drive

K420 Oscilloscope cart

NEX-HD2HEADER Mictor connector to square pin adapter

Cables

012-0991-xx GPIB Cable (1 m)

012-0991-xx GPIB Cable (2 m)

Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series

www.tektronix.com 25

Test fixtures

067-1686-xx Probe Calibration / Power Deskew test fixture

TDSUSBF Test fixture for use with Opt. USB

TF-GBE-BTP Basic test package for 10/100/1000BASE-T Ethernet tests

TF-GBE-ATP Advanced test package for 10/100/1000BASE-T Ethernet (includes 1000BASE-T jitter test channel cable)

TF-GBE-EE Additional test fixture for Energy Efficient Ethernet measurements. Order through Crescent Heart Software (http://www.c-h-s.com)

Adapters

P6701B Optical/Electrical converter (multi mode). Requires TekVPI® to TekProbe BNC adapter (TPA-BNC).

P6703B Optical/Electrical converter (single mode). Requires TekVPI® to TekProbe BNC adapter (TPA-BNC).

Probes Tektronix offers over 100 different probes to meet your application needs. For a comprehensive listing of available probes, please

visit www.tektronix.com/probes.

TPP0500 500 MHz, 10X TekVPI® passive voltage probe with 3.9 pF input capacitance

TPP1000 1 GHz, 10X TekVPI passive voltage probe with 3.9 pF input capacitance

TPP0502 500 MHz, 2X TekVPI passive voltage probe

TAP2500 2.5 GHz TekVPI active single-ended voltage probe

TAP1500 1.5 GHz TekVPI active single-ended voltage probe

TDP3500 3.5 GHz TekVPI differential voltage probe with ±2 V differential input voltage

TDP1500 1.5 GHz TekVPI differential voltage probe with ±8.5 V differential input voltage

TDP1000 1 GHz TekVPI differential voltage probe with ±42 V differential input voltage

TDP0500 500 MHz TekVPI differential voltage probe with ±42 V differential input voltage

TCP0150 20 MHz TekVPI 150 Ampere AC/DC current probe

TCP0030A 120 MHz TekVPI 30 Ampere AC/DC current probe

TCP0020 50 MHz TekVPI 20 Ampere AC/DC current probe

TPP0850 2.5 kV, 800 MHz TekVPI high-voltage passive probe

TMDP0200 ±750 V, 200 MHz high-voltage differential probe

THDP0200 ±1.5 kV, 200 MHz high-voltage differential probe

THDP0100 ±6 kV, 100 MHz high-voltage differential probe

P5100A 2.5 kV, 500 MHz, 100X high-voltage passive probe

Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.

Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats.

Datasheet

26 www.tektronix.com

Mixed Signal Oscilloscopes - MSO5000B, DPO5000B Series

www.tektronix.com 27

Datasheet

ASEAN / Australasia (65) 6356 3900 Austria 00800 2255 4835* Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777

Belgium 00800 2255 4835* Brazil +55 (11) 3759 7627 Canada 1 800 833 9200

Central East Europe and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401

Finland +41 52 675 3777 France 00800 2255 4835* Germany 00800 2255 4835*

Hong Kong 400 820 5835 India 000 800 650 1835 Italy 00800 2255 4835*

Japan 81 (3) 6714 3010 Luxembourg +41 52 675 3777 Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90

Middle East, Asia, and North Africa +41 52 675 3777 The Netherlands 00800 2255 4835* Norway 800 16098

People's Republic of China 400 820 5835 Poland +41 52 675 3777 Portugal 80 08 12370

Republic of Korea 001 800 8255 2835 Russia & CIS +7 (495) 6647564 South Africa +41 52 675 3777

Spain 00800 2255 4835* Sweden 00800 2255 4835* Switzerland 00800 2255 4835*

Taiwan 886 (2) 2722 9622 United Kingdom & Ireland 00800 2255 4835* USA 1 800 833 9200

* European toll-free number. If not accessible, call: +41 52 675 3777 Updated 10 April 2013

For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com.

Copyright © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and

price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.

04 Nov 2013 48W-29560-0