Data Sheet No. PD 10037 revI Series PVT422PbF Microelectronic Power IC HEXFET Power MOSFET Photovoltaic Relay (R) Dual Pole, Normally Open 0-400V, 120mA AC/DC General Description The PVT422 Series Photovoltaic Relay is a dualpole, normally open solid-state relay that can replace electromechanical relays in many applications. It util izes International Rectifier's HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. Features HEXFET Power MOSFET output Bounce-free operation 4,000 VRMS I/O isolation Linear AC/DC operation Solid-State Reliability UL recognized and BABT certified Series PVT422 Relays are packaged in an 8-pin, molded DIP package with either thru-hole or surface mount (gull-wing) terminals. It is available in standard plastic shipping tubes or on tape-and-reel. Please refer to Part Identification information opposite. Applications On/Off Hook switch Dial-Out relay Ring injection relay General switching Part Identification PVT422PbF PVT422SPbF PVT422S-TPbF thru-hole surface-mount surface-mount, Tape and Reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) www.irf.com 1 Series PVT422PbF Electrical Specifications (-40C TA +85C unless otherwise specified) INPUT CHARACTERISTICS Minimum Control Current (See figure1) Limits Units 2.0 mA Maximum Control Current for Off-State Resistance @TA=+25C 0.4 mA Control Current Range (Caution: current limit input LED, see figure 5) 2.0 to 25 mA 6.0 V Maximum Reverse Voltage OUTPUT CHARACTERISTICS Limits Operating Voltage Range 0 to 400 Maximum Load Current @ TA=+40C 5mA Control (See figure 1) (single and dual channel operation) 120 Maximum Peak Load Current (10ms maximum duration) (single and dual channel operation) 350 Maximum On-State Resistance @TA=+25C For 50mA Pulsed load, 5mA Control (see figure3) 35 Maximum Off-State Leakage @TA=+25C, 320V (see figure 4) 1.0 Maximum Turn-On Time @TA=+25C (see figure 6) 2.0 For 50mA, 100 VDC load, 5mA Control 2.0 Maximum Turn-Off Time @TA=+25C (see figure 6) For 50mA, 100 VDC load, 5mA Control Maximum Output Capacitance @ 50VDC 12 GENERAL CHARACTERISTICS Minimum Dielectric Strength, Input-Output Minimum Dielectric Strength, Pole-to-Pole Minimum Insulation Resistance, Input-Output, @TA=+25C, 50%RH, 100VDC Maximum Capacitance, Input-Output Maximum Pin Soldering Temperature (10 seconds maximum) Ambient Temperature Range: Operating Storage International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. www.irf.com Limits 4000 1000 1012 1.0 +260 -40 to +85 -40 to +100 Units V(DC or AC peak) mA mA A ms ms pF Units VRMS VDC pF C Connection Diagram 2 Series PVT422PbF Figure 1. Typical Current Derating Curve Figure 2. Linearity Characteristics Figure 3. Typical Normalized On-Resistance Figure 4. Typical Normalized Off-State Leakage www.irf.com 3 Series PVT422PbF Figure 5. Input Characteristics (Current Controlled) Figure 6. Typical Delay Times Figure 7. Delay Time Definitions Figure 8. Typical Output Capacitance www.irf.com 4 Series PVT422PbF Case Outlines 01-2004 04 01-2005 04 IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 Data and specifications subject to change without notice. 2/2008 www.irf.com 5