M2 Series 5x7 mm, 3.3 Volt, HCMOS/TTL Compatible Output, Clock Oscillator DENOTES PIN 1 Electrical Specifications PARAMETER Frequency Range Operating Temperature Storage Temperature Frequency Stability Aging st 1 Year Thereafter (per year) Input Voltage Input Current NOTE: A capacitor of value 0.01 F or greater between Vdd and Ground is recommended. Environmental Vdd Idd Standby Current Output Type Load Symmetry (Duty Cycle) Logic "1" Level Voh Logic "0" Level Vol Output Current Rise/Fall Time Tr/Tf Standby/Tristate Function Pin Connections Symbol F TA TS F/F Start up Time Random Jitter Mechanical Shock Vibration Hermeticity Thermal Cycle Solderability Soldering Conditions Min. Typ. Max. 1.0 135 (See ordering information) -55 +125 (See ordering information) 3.0 3 2 3.3 3.6 10 20 30 55 10 2 TTL or 15 pF (See ordering information) 90% Vdd Vdd -0.5 10% Vdd 0.5 4 Units MHz Condition/Notes See Note 1 C ppm ppm V mA mA mA mA A V V V V mA 1.000 to 20.000 MHz 20.001 to 50.000 MHz 50.001 to 67.000 67.001 to 135.000 MHz "Q" Output Type HCMOS/TTL Compatible See Note 2 1/2 Vdd HCMOS Load TTL Load HCMOS Load TTL Load See Note 3 6 ns 1.500 to 50.000 MHz 4 ns 50.001 to 80.000 MHz 2 ns 80.001 to 135.000 MHz Input Logic "1" or floating: output active Input Logic "0"; output disables to high-Z 10 ms Rj 4 10 ps RMS 1-Sigma Per MIL-STD-202, Method 213, Condition C (100 g's, 6 mS duration, 1/2 sinewave) Per MIL-STD-202, Method 201 & 204 (10 g's from 10-2000 Hz) -8 Per MIL-STD-202, Method 112, (1x10 atm. cc/s of Helium) Per MIL-STD-883, Method 1010, Condition B (-55C to +125C, 15 min. dwell, 10 cycles) Per EIAJ-STD-002 See solder profile, Figure 1 1. Consult factory for availability of higher frequencies. 2. HCMOS Load - See Load circuit diagram #2. Consult factory with nonstandard output load requirements. 3. Rise/Fall times are measured between 0.5 V and 2.4 V with TTL load, and between 10% Vdd and 90% Vdd with HCMOS load. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. Revision:6-18-10 MtronPTI Lead Free Solder Profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.