© 2014 Zentrum Mikroelektronik Dresden AG — Rev.2.00 — October 14, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated,

stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

The ZSPM1005 integrates a digital control loop, opti-

mized for maximum flexibility and stability as well as

load step and steady-state performance. In addition,

a rich set of protection and monitoring functions is

provided. To facilitate user configuration of the part,

a set of configuration options can be pre-prog-

rammed in the ZSPM1005 that can be selected by

setting the values of two external resistors.

ZMDI’s Pink Power Designer™; a PC-based, user-

friendly interface to the ZSPM1005, can be used to

 Programmable digital control loop

 Advanced, digital control techniques

 Tru-sample Technology™

 State-Law Control™ (SLC)

 Sub-cycle Response™ (SCR)

 Improved transient response and noise immunity

 Protection features

 Over-current protection

 Over-voltage protection (VIN, VOUT)

 Operation from a single 5V or 3.3V supply

 2-pin configuration for compensation, output

voltage, and more

 Simplified design and integration

 FPGA designer-friendly solution

 Highest power density with smallest footprint

 Pin-to-pin compatible with the ZSPM1000 PWM

 Operation temperature: -40°C to +125°C

 VOUT max: 5V

 Lead free (RoHS compliant) 24-pin QFN package

All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.