1-56
T-13/4 (5 mm), Wide Viewing
Angle, High Intensity LED
Lamps
Technical Data
Features
• Outstanding LED Material
Efficiency
• Extremely Wide Horizontal
Viewing Angle
• High Light Output over a
Wide Range of Currents
• Untinted, Non-diffused Lens
• Choice of Four Colors: 644
nm Red, 590 nm Amber, 570
nm Green, and 615 nm
Orange
H
Description
These high intensity LED lamps
provide the user with an
extremely wide 60° (horizontal)
by 30° (vertical) oval shaped
radiation pattern. Available in TS
AlGaAs red, AlInGaP amber,
AlInGaP orange, and GaP green
colors, these untinted non-
diffused T-13/4 (5 mm) LEDs are
an excellent choice for outdoor
applications requiring an
extremely wide field of vision and
high brightness.
Applications
• Outdoor Message Boards
• Safety Lighting Equipment
• Changeable Message Signs
• Alternative to Incandescent
Lamps
Device Selection Guide
Amber Red-Orange Red Green
λd = 590 nm λd = 615 nm λd = 644 nm λd = 570 nm
HLMA-VL00 HLMA-VH00 HLMP-V100 HLMP-V500
Outline Drawing
13.97 ± 0.76
(0.550 ± 0.030)
NOTE 1
1.02
(0.040) MAX
0.51
(0.020) SQUARE
NOMINAL
2.54 ± 0.25
(0.100 ± 0.010)
2.54 ± 0.25
(0.100 ± 0.010)
2.54 ± .025
(0.100 ± 0.010)
8.71 ± 0.38
(0.343 ± 0.015)
MIN
20.32
(0.800)
5.59 ± 0.25
(0.220 ± 0.010)
5.08 ± 0.25
(0.200 ± 0.010)
HLMA-VL00
HLMP-V100
HLMP-V500
HLMA-VH00
NOTES:
1. LEAD ORIENTATION:
DEVICE TYPE
HLMP-V100
HLMP-V500
HLMA-VL00
HLMA-VH00
2. ALL DIMENSIONS ARE IN MM (INCHES).
CENTER LEAD
COMMON ANODE
COMMON CATHODE
COMMON CATHODE
COMMON CATHODE
OUTER LEADS
CATHODE
ANODE
ANODE
ANODE
2.54 ± 0.76
(0.100 ± 0.030)
5964-9292E
1-57
Absolute Maximum Ratings at TA = 25°C
Parameter HLMA-VL00 HLMA-VH00 HLMP-V100 HLMP-V500 Units
DC Forward Current[1,3] 60[4,5] 60[4,5] 60 50 mA
Peak Forward Current[2,3] 400 400 600 180 mA
Average Input Power[2] 120 120 120 110 mW
Reverse Voltage (IR = 200 µA)5555V
Operating Temperature Range -40 to +100 -40 to +100 -55 to +85 -20 to +100 °C
Storage Temperature Range -55 to +100 -55 to +100 -55 to +100 -55 to +100 °C
Junction Temperature 110 °C
Soldering Temperature 260°C for 5 seconds
[1.59 mm (0.06 in.) below
seating plane]
Notes:
1. Derate linearly as shown in Figure 5.
2. Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or the Max Allowable Average Power as specified in
Figure 6.
3. Specified with both die powered simultaneously.
4. Drive Currents between 10 mA and 30 mA are recommended for best long term performance.
5. Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative.
Forward Reverse Capacitance Speed of Response
Voltage Breakdown C (pF) Thermal τs (ns)
VF (Volts) VR (Volts) VF = 0, Resistance Time Constant
@ IF = 40 mA @ IR = 200 µA f = 1 MHz RθJ-PIN e-t/τs
Part Number Typ. Max. Min. Typ. (°C/W) Typ.
HLMA-VL00 1.90 2.4 5 120 100 13
HLMA-VH00 1.90 2.4 5 120 100 13
HLMP-V100 1.85 2.4 5 50 115 26
HLMP-V500 2.20 3.0 5 20 100 171
Electrical Characteristics at TA = 25°C
Luminous Color, Viewing
Intensity Peak Dominant Angle Luminous
IV (mcd) Wavelength Wavelength 2θ1/2Efficacy
@ 40 mA[1] λpeak (nm) λd[2] (nm) Degrees[3] ηV
Part Number Min. Typ. Typ. Typ. Typ. (lm/w)
HLMA-VL00 212 460 592 590 60° horizontal 480
30° vertical
HLMA-VH00 200 460 621 615 263
HLMP-V100 500 1000 654 644 60° horizontal 85
30° vertical
HLMP-V500 112 270 568 570 60° horizontal 595
30° vertical
Notes:
1. The luminous intensity, IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern
may not be aligned with this axis.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. 2 θ1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.
Optical Characteristics at TA = 25°C
1-58
Figure 2a. Forward Current vs.
Forward Voltage, HLMA-VL00/VH00.
Figure 4c. Relative Efficiency vs. Peak
Forward Current, HLMP-V500. Figure 5b. Maximum Forward DC
Current vs. Ambient Temperature,
HLMP-V100.
Figure 2b. Forward Current vs.
Forward Voltage, HLMP-V100. Figure 2c. Forward Current vs.
Forward Voltage, HLMP-V500.
50
40
30
20
10
0020 40 60 80 100
T
A
– AMBIENT TEMPERATURE – °C
I
F
– FORWARD CURRENT – mA
(BOTH DIE POWERED SIMULTANEOUSLY)
60
70
Rθ
JA
= 350° C/W
Rθ
JA
= 480° C/W
50
40
30
20
10
0020 40 60 80 100
T
A
– AMBIENT TEMPERATURE – °C
I
F
– FORWARD CURRENT – mA
(BOTH DIE POWERED SIMULTANEOUSLY)
60
70
85
Rθ
JA
= 350° C/W
Rθ
JA
= 480° C/W
η
PEAK
– RELATIVE EFFICIENCY
(NORMALIZED AT 40 mA)
1.3
0.4
I
PEAK
– PEAK FORWARD CURRENT – mA
1.2
1.0
0.9
1.1
0.6
0 18060 12020 100 14040 80 160
0.5
0.7
0.8
40
0.6
10
I
F
– FORWARD CURRENT – mA
0
0.2
20 30
0.8
0.4
1.0
RELATIVE LUMINOUS INTENSITY
50
RED
ORANGE & AMBER
60
1.2
1.4
1.6
GREEN
1.2
1.1
1.0
0.9
0.0 1 4 10 20 40 100 200 400 600
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
IPEAK – PEAK FORWARD CURRENT – mA
1.3
ηV– RELATIVE EFFICIENCY
(NORMALIZED AT 40 mA)
I
F
– FORWARD CURRENT – mA
1.0
0
V
F
– FORWARD VOLTAGE – V
2.5
400
240
160
1.5 2.0
320
3.0
80
40
120
200
280
360
I
F
– FORWARD CURRENT – mA
(BOTH DIE POWERED SIMULTANEOUSLY)
1.7 2.6
1
V
F
– FORWARD VOLTAGE – V
1.9 2.22.0 2.4
200
100
10
2.8 3.0 3.2
I
F
– FORWARD CURRENT – mA
(BOTH DIE POWERED SIMULTANEOUSLY)
1.5 4.0
600
1
V
F
– FORWARD VOLTAGE – V
2.0 3.02.5 3.5
200
100
10
4.5
η
V
– RELATIVE EFFICIENCY
(NORMALIZED AT 40 mA)
2.6
0
I
PEAK
– PEAK FORWARD CURRENT – mA
2.4
1.8
1.4
2.0
0.6
0 400120 24040 200 28080 160 320
0.2
0.8
1.2
2.2
1.6
1.0
0.4
360
Figure 5a. Maximum Forward DC
Current vs. Ambient Temperature,
HLMA-VL00/VH00.
Figure 4b. Relative Efficiency vs. Peak
Forward Current, HLMP-V100.
Figure 3. Relative Luminous Intensity
vs. Forward Current.
Figure 4a. Relative Efficiency vs. Peak
Forward Current, HLMA-VL00/VH00.
1-59
Figure 7b. Relative Intensity vs. Angle, HLMA-VL00/VH00 Vertical Axis.
ANGULAR DISPLACEMENT (DEGREES)
NORMALIZED LUMINOUS INTENSITY
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
080 60 0 -20 -40 -60 -80 -100
100 40 20
50
40
30
20
10
0020 40 60 80 100
T
A
– AMBIENT TEMPERATURE – °C
I
F
– FORWARD CURRENT – mA
(BOTH DIE POWERED SIMULTANEOUSLY)
60
70
Rθ
JA
= 350° C/W
Rθ
JA
= 480° C/W
100
80
60
40
20
0020 40 60 80 100
T
A
– AMBIENT TEMPERATURE – °C
TIME AVERAGE POWER (mW)
(BOTH DIE POWERED SIMULTANEOUSLY)
120
140
Rθ
JA
= 350° C/W
Rθ
JA
= 480° C/W
f ≥ 100 Hz
100
80
60
40
20
0020 40 60 80 100
T
A
– AMBIENT TEMPERATURE – °C
TIME AVERAGE POWER (mW)
(BOTH DIE POWERED SIMULTANEOUSLY)
120
140
85
Rθ
JA
= 350° C/W
Rθ
JA
= 480° C/W
f ≥ 100 Hz
Figure 6a. Maximum Allowable
Average Power vs. Ambient
Temperature, HLMA-VL00/VH00.
Figure 6b. Maximum Allowable
Average Power vs. Ambient
Temperature, HLMP-V100.
Figure 5c. Maximum Forward DC
Current vs. Ambient Temperature,
HLMP-V500.
100
80
60
40
20
0020 40 60 80 100
T
A
– AMBIENT TEMPERATURE – °C
TIME AVERAGE POWER (mW)
(BOTH DIE POWERED SIMULTANEOUSLY)
120
140
Rθ
JA
= 350° C/W
Rθ
JA
= 480° C/W
f ≥ 100 Hz
ANGULAR DISPLACEMENT (DEGREES)
NORMALIZED LUMINOUS INTENSITY
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
080 60 0 -20 -40 -60 -80 -100
100 40 20
Figure 6c. Maximum Allowable
Average Power vs. Ambient
Temperature, HLMP-V500.
Figure 7a. Relative Intensity vs. Angle, HLMA-VL00/VH00 Horizontal Axis.
1-60
Figure 8a. Relative Intensity vs. Angle, HLMP-V100 Horizontal Axis.
Figure 9a. Relative Intensity vs. Angle, HLMP-V500 Horizontal Axis.
Figure 8b. Relative Intensity vs. Angle, HLMP-V100 Vertical Axis.
ANGULAR DISPLACEMENT (DEGREES)
NORMALIZED LUMINOUS INTENSITY
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
080 60 0 -20 -40 -60 -80 -100
100 40 20
ANGULAR DISPLACEMENT (DEGREES)
NORMALIZED LUMINOUS INTENSITY
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
080 60 0 -20 -40 -60 -80 -100
100 40 20
ANGULAR DISPLACEMENT (DEGREES)
NORMALIZED LUMINOUS INTENSITY
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
080 60 0 -20 -40 -60 -80 -100
100 40 20
1-61
Figure 9b. Relative Intensity vs. Angle, HLMP-V500 Vertical Axis.
ANGULAR DISPLACEMENT (DEGREES)
NORMALIZED LUMINOUS INTENSITY
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
080 60 0 -20 -40 -60 -80 -100
100 40 20
