Solid State Relay G3R-I/O Compact SSRs for I/O Interface with High Dielectric Strength Requirements * High-speed models with optimum input ratings for a variety of sensors are available. * Input Modules and Output Modules that have the same form-factor as the G2R. * Using a coupler approved by VDE 0884 and assuring an I/O dielectric strength of 4 kV. * Incorporating an easy-to-see monitoring indicator. * Approved by UL, CSA, and TUV. ("-UTU" models) Ordering Information To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5) Input Module Isolation Indicator Response speed Logic level Supply voltage Photocoupler Yes -- 4 to 32 VDC Supply current 0.1 to 100 mA Rated input voltage Model 100 to 240 VAC G3R-IAZR1SN High-speed (1 kHz) 5 VDC G3R-IDZR1SN Low-speed (10 Hz) 5 VDC 12 to 24 VDC G3R-IDZR1SN-1 12 to 24 VDC Output Module Isolation Phototriac Indicator Yes Zero cross function Yes Rated output load 2 A at 100 to 240 VAC Rated input voltage 5 to 24 VDC G3R-OA202SZN No Photocoupler Model G3R-OA202SLN -- 2 A at 5 to 48 VDC G3R-ODX02SN 1.5 A at 48 to 200 VDC G3R-OD201SN Note: When ordering a UL, CSA and EN (TUV) approved model, add "-UTU" to the model number as shown below: Example: G3R-OA202SZN-UTU DC5-24. I/O Indication I/O module classification and AC/DC use are indicated on the mark affixed to the top of the product. Mark indication AC IN Mark attached to the top of the product Specification Input module, AC input DC IN Input module, DC input AC OUT Output module, AC output DC OUT Output module, DC output Solid State Relay G3R-I/O 407 Specifications Ratings (at an Ambient Temperature of 25C) Input Module Input Model Rated voltage Operating voltage Input current Must operate voltage Must release voltage G3R-IAZR1SN 100 to 240 VAC 60 to 264 VAC 15 mA max. 60 VAC max. 20 VAC min. G3R-IDZR1SN 5 VDC 4 to 6 VDC 8 mA max. 4 VDC max. 1 VDC min. G3R-IDZR1SN-1 12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min. 5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min. 12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min. Output Model Logic level supply voltage G3R-IAZR1SN Logic level supply current 4 to 32 VDC 0.1 to 100 mA G3R-IDZR1SN G3R-IDZR1SN-1 Output Module Input Model G3R-OA202SZN Rated voltage 5 to 24 VDC Operating voltage 4 to 32 VDC Input current G3R-OA202SLN 15 mA max. (at 25C) G3R-ODX02SN 8 mA max. Must operate voltage 4 VDC max. Must release voltage 1 VDC min. G3R-OD201SN Output Model G3R-OA202SZN Rated load voltage 100 to 240 VAC Load voltage range 75 to 264 VAC Load current (see note) 0.05 to 2 A Inrush current 30 A (60 Hz, 1 cycle) G3R-OA202SLN G3R-ODX02SN 5 to 48 VDC 4 to 60 VDC 0.01 to 2 A 8 A (10 ms) G3R-OD201SN 48 to 200 VDC 40 to 200 VDC 0.01 to 1.5 A 8 A (10 ms) Note: The minimum current value is measured at 10C min. 408 Solid State Relay G3R-I/O Characteristics Input Module Operate time Item G3R-IAZR1SN 20 ms max. G3R-IDZR1SN 0.1 ms max. Release time Response frequency Output ON voltage drop Leakage current Insulation resistance Dielectric strength 20 ms max. 0.1 ms max. 10 Hz 1 kHz 1.6 V max. 5 A max. 100 M min. between input and output 4,000 VAC, 50/60 Hz for 1 min. between input and output Vibration resistance Shock resistance 10 to 55 Hz, 1.5-mm double amplitude G3R-IDZR1SN-1 15 ms max. 15 ms max. 10 Hz 1,000 m/s2 {approx. 100G} Operating: -30C to 80C (with no icing) Storage: -30C to 100C (with no icing) UL File No. E64562 CSA File No. LR35535 TUV File No. R9650094 (EN60950) Operating: 45% to 85% Approx. 18 g Ambient temperature Approved standards Ambient humidity Weight Output Module Item Operate time Release time Response frequency G3R-OA202SZN G3R-OA202SLN 1/2 of load power source cycle + 1 ms max. 1/2 of load power source cycle + 1 ms max. 20 Hz Output ON voltage drop Leakage current Insulation resistance Dielectric strength Vibration resistance 1.6 V max. 1.5 mA max. 1 mA max. 100 M min. between input and output 4,000 VAC, 50/60 Hz for 1 min. between input and output 10 to 55 Hz, 1.5-mm double amplitude Shock resistance 1,000 m/s2 {approx. 100G} Ambient temperature Operating: -30C to 80C (with no icing) Storage: -30C to 100C (with no icing) UL File No. E64562 CSA File No. LR35535 TUV File No. R9650094 (EN60950) Operating: 45% to 85% Approx. 18 g Approved standards Ambient humidity Weight G3R-ODX02SN 1 ms max. 2 ms max. 100 Hz Solid State Relay G3R-OA201SN 2.5 V max. G3R-I/O 409 Engineering Data Load Current vs. Ambient Temperature 4-point mounting (see note 1) 16-point mounting (see note 2) 1.5 1.4 Single-point mounting 1 0.7 0.5 2 16-point mounting (see note 2) 1.5 1.4 Single-point mounting 1 0 20 30 40 55 60 80 -30 -20 100 4-point mounting (see note 1) 1.5 1.1 1 Single-point mounting 16-point mounting (see note 2) 0.6 0.5 0.5 -30 -20 G3R-OD201SN(-UTU) (40 to 200 VAC) 4-point mounting (see note 1) 2 Load current (A) 2 Load current (A) G3R-ODX02SN(-UTU) (4 to 60 VDC) Load current (A) G3R-OA202SZN(-UTU)/OA202SLN(-UTU) Ambient temperature (C) 0 20 40 55 60 80 100 -30 -20 Ambient temperature (C) 0 20 40 55 60 80 100 Ambient temperature (C) Note: 1. When G730-Z0M04-B is mounted. 2. When G70A-Z0C16 is mounted. Inrush Current Resistivity Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) G3R-OA202SZN(-UTU)/OA202SLN(-UTU) G3R-ODX02SN(-UTU) 20 10 10 30 50 100 200 500 1000 5000 10 9 9 8 8 7 6 5 4 3 Solid State Relay 7 6 5 4 3 2 2 1 1 0 Energized time (ms) 410 Inrush current (A) Inrush current (A) Inrush current (A) 30 G3R-OD201SN(-UTU) 10 10 30 50 100 300 500 Energized time (ms) G3R-I/O 1000 2000 0 10 30 50 100 300 500 Energized time (ms) 1000 2000 Dimensions Unit: mm (inch) G3R 1 Terminal Arrangement/ Internal Connections (Bottom View) 5.2 3 0.5 29 max. (+) 4 9.6 1 28 max. 13 max. (-) 17.4 4.75 5 4.7 0.5 4.75 4 4 Load 5 7.5 3 Input 1 5 (-) (+) 10 2 20 Connecting Sockets P2RF-05 Five, M3.5x8 G3R I/O Relay 4 dia. 4.2-dia. hole 12 71.5 max. P2RF-05 Socket 58.5 * M3 (M3 x16) or 3.2-dia. hole 19.5 max. 30 max. 54 max. * Indicates a value when using the PFP-@N Supporting Rail. The value is 67.5 when using the PFP-@N2. P2RF-05-E G3R I/O Relay 59 max. 48 max. M3.5 screw PFRF-05-E Socket 3.2-dia. hole 3.5-dia. hole 62.5 ** (66.5)*** 85.5 max. M3 or 3.5-dia. hole 61 max. P2R-05A ** Indicates a value when using the PFP-@N Supporting Rail with the P2RF-05-E The value is 71.5 when using the PFP-@N2. *** Indicates a value when using the PFP-@N Supporting Rail with the P2RF-08-E The value is 75.5 when using the PFP-@N2. 14.5 max. G3R I/O Relay 35.5 max. P2R-05A Socket Five, 3x1.5-dia. hole 36 max. (Panel thickness must be 1.6 to 2.0 mm.) (For use when mounting in a panel or in the P2R-P mounting plate ) Solid State Relay G3R-I/O 411 14.5 max. P2R-05P Five, 1.6-dia. hole G3R I/O Relay 35.5 max. P2R-05P Socket 36 max. Dimensional tolerance is 0.1. 14 max. Five, 1.6-dia. hole P2R-057P G3R I/O Relay 32 max. P2R-057P Socket 41 max. Socket Mounting Plate Use the P2R-P Socket Mounting Plate when arranging several P2R-05A Sockets in a row. P2R-P R2.25 10 ellipses Square hole Approvals UL Recognized (File No. E64562) / CSA Certified (File No. LR35535) Model G3RIAZR1SN Module type Input Rating 100 to 240 VAC IDZR1SN Input 5 VDC, 12 to 24 VDC IDZR1SN-1 Input 5 VDC, 12 to 24 VDC OA202SZN Output 5 to 24 VDC OA202SLN Output 5 to 24 VDC ODX02SN Output 5 to 24 VDC OD201SN Output 5 to 24 VDC Model G3RIAZR1SN Module type Input Output rating 32 VDC, 100 mA (General Purpose) IDZR1SN Input 32 VDC, 100 mA (General Purpose) IDZR1SN-1 Input 32 VDC, 100 mA (General Purpose) OA202SZN Output 264 VAC, 2 A (General Purpose) 264 VAC, 1 A (Tungsten) 264 VAC, 1 A FLA, 6 A LRA OA202SLN Output 264 VAC, 2 A (General Purpose) 264 VAC, 1 A (Tungsten) 264 VAC, 1 A FLA, 6 A LRA ODX02SN Output 60 VDC, 2 A (General Purpose) OD201SN Output 200 VDC, 1.5 A (General Purpose) 60 VDC, 1 A (Tungsten) 200 VDC, 0.75 A (Tungsten) 412 Solid State Relay G3R-I/O Precautions Connection Protective element With the SSR for DC switching, the load can be connected to either positive or negative output terminal of the SSR. Since the SSR does not incorporate an overvoltage absorption component, be sure to connect an overvoltage absorption component when using the SSR under an inductive load. Precaution of Mounting Output Modules With up to four G3R SSRs mounted closely and side by side, 2-A loads can be switched. G3R G3R With a G3R SSRs mounted every other slot, 2-A loads can be switched. G3R Solid State Relay G3R-I/O 413 Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies ("Omron"). Omron objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron's payment terms and (ii) Buyer has no past due amounts. 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 7. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in "break down" situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 13. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- 14. 15. 16. 17. 18. ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron247.com or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to "forbidden" or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, "including" means "including without limitation"; and "Omron Companies" (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO 2. 3. 4. 5. ADDRESS THE RISKS, AND THAT THE OMRON'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON ELECTRONICS LLC * THE AMERICAS HEADQUARTERS * Schaumburg, IL USA * 847.843.7900 * 800.556.6766 * www.omron247.com OMRON CANADA, INC. * HEAD OFFICE Toronto, ON, Canada * 416.286.6465 * 866.986.6766 www.omron247.com OMRON ARGENTINA * SALES OFFICE Cono Sur * 54.11.4783.5300 OMRON ELETRONICA DO BRASIL LTDA * HEAD OFFICE Sao Paulo, SP, Brasil * 55.11.2101.6300 * www.omron.com.br OMRON CHILE * SALES OFFICE Santiago * 56.9.9917.3920 OMRON ELECTRONICS MEXICO SA DE CV * HEAD OFFICE Apodaca, N.L. * 52.811.156.99.10 * 001.800.556.6766 * mela@omron.com OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 Omron Europe B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. Tel: +31 (0) 23 568 13 00 Fax: +31 (0) 23 568 13 88 www.industrial.omron.eu Cat. No. J25I-E-01 06/09 Note: Specifications are subject to change. (c) 2010 Omron Electronics LLC