API_newlayouts_single:APIcatalog_newlayouts 8/26/10 2:39 PM Page 103 SH Power Toroids Horizontal or Vertical Mount Inductance tested at 1 kHz, <10 gauss and 0 ADC DC Resistance at 25C Rated Idc based on 40C maximum rise from 25C ambient with 0 Arms Windings single layered to maximize operating frequency and minimize board space Self leads solder coated to within 0.050" of seating plane Other values available on request Packaging Bulk only Mounting Standard mounting is self-lead radial per Figure "1". Optional mounting methods are self-leaded horizontal per Figure "2" or vertical base mounted per Figures "3" and "4". FIGURE FIGURE 1 2 STANDARD VERTICAL FIGURE HORIZONTAL FIGURE 3 4 VERTICAL 2-LEAD s or ct du In er w DA SERIES D Po EA -L L " 4 CA "4 TI G. ER D FI V EA -L L " 2 CA "3 TI G. ER "2" FI V G. FI TAL N ZO RI RD HO DA L N A TA TIC "S R "1 VE S) G. FI MP (A C ID D TE S) RA HM (O M MU XI Hz MA 1k R @ DC 5% 1 H) * ( ER D. IN MB NU MOUNTING AVAILABLE PTxxxR PT VERTICAL 4-LEAD *Complete part # must include series # PLUS the dash # PT5-530 PT5-700 PT5-800 PT5-1000 PT10-530 PT10-680 PT10-820 PT10-990 PT25-680 PT25-800 PT25-900 PT25-1000 PT50-780 PT50-900 PT50-1020 PT50-1320 PT75-900 PT75-980 PT75-1260 PT75-1550 PT100-1000 PT100-1100 PT100-1260 PT100-1550 PT150-1040 PT150-1250 PT150-1500 PT150-2050 PT250-1200 PT250-1500 PT250-1800 PT300-1200 PT300-1500 PT300-1750 PT400-1200 PT400-1500 PT400-1750 PT500-1450 PT500-1750 PT500-2000 PT750-1400 PT750-1700 PT750-2050 PT1000-1400 PT1000-1750 PT1000-2050 5 5 5 5 10 10 10 10 25 25 25 25 50 50 50 50 75 75 75 75 100 100 100 100 150 150 150 150 250 250 250 300 300 300 400 400 400 500 500 500 750 750 750 1000 1000 1000 PT SERIES POWER TOROIDS 0.015 6.1 * 0.012 7.4 * 0.010 10.6 * 0.008 12.8 * 0.020 4.9 * 0.015 6.8 * 0.010 9.3 * 0.008 13.2 * 0.035 4.4 * 0.025 6.6 * 0.020 7.0 * 0.014 10.4 * 0.050 3.8 * 0.030 5.6 * 0.025 7.0 * 0.020 11.0 * 0.060 3.9 * 0.040 5.2 * 0.035 7.4 * 0.025 10.6 * 0.080 3.5 * 0.050 5.1 * 0.035 7.8 * 0.028 10.3 * 0.100 3.4 * 0.060 5.7 * 0.050 7.7 * 0.040 12.3 * 0.130 3.8 * 0.080 6.1 * 0.055 9.1 * 0.150 3.3 * 0.100 5.5 * 0.075 7.3 * 0.250 2.4 * 0.180 4.7 * 0.110 6.0 * 0.220 3.4 * 0.160 5.0 * 0.090 8.0 * 0.350 2.6 * 0.280 3.7 * 0.150 6.4 * 0.620 1.8 * 0.420 3.1 * 0.200 5.9 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * For surface finish information, refer to www.delevanfinishes.com Notes to Figure 5 (Page 100) The PT Toroid Series inductance is specified at AC and DC signal levels which have no significant effect on the permeability of the powdered iron toroidal core. Superimposed AC and DC voltages will change the permeability and therefore the inductance, under operating conditions. Typically, DC currents will reduce the inductance, while AC signals will increase the inductance up to a point, before beginning to decrease. Supporting information is provided, detailing the AC or DC effects upon each part. Saturation resulting from DC currents is specified with waveform having less than a 1% ripple content. When considering the AC waveform, both the frequency and voltage level must be taken into account. As an aid in defining what effect the alternating sine wave signal will have, the voltage/frequency factor curve can be used. To determine what change of inductance can be expected at a given voltage level and frequency, simply divide the sinusoidal RMS voltage by the frequency. The voltage is in volts and the frequency is in hertz. As an example, if using part number PT25-680 at a 1VRMS signal level, and a frequency of 25KHz, the voltage/frequency factor is calculated to be: 1VRMS/25,000Hz = 40 x 10-6. Referring to the graph, a 39% increase in inductance would be expected. Notes to Figure 6 (Page 100) Typical saturation effects as a function of DC flowing through the part. Data is representative of a DC waveform with less than 1% ripple, and an AC waveform less than 10 gauss. Note This information is intended to be used in assisting the designer in part selection. Each operating application may contain other variables which must be considered in part selection; such as temperature effects, waveform distortion, etc.... Delevan Sales/Engineering staff is available to provide information as needed to fit each application. 270 Quaker Rd., East Aurora NY 14052 * Phone 716-652-3600 * Fax 716-652-4814 * E-mail: apisales@delevan.com * www.delevan.com 1/2009 API_newlayouts_single:APIcatalog_newlayouts 8/26/10 2:40 PM Page 104 er w Po ELECTRICAL PT SERIES (continued) PHYSICAL PARAMETERS s or ct du In % 15 0.64 0.81 1.02 1.30 0.64 0.81 1.02 1.30 0.64 0.81 1.02 1.30 0.64 0.81 1.02 1.30 0.64 0.81 1.02 1.30 0.64 0.81 1.02 1.30 0.64 0.81 1.02 1.30 0.64 0.91 1.30 0.64 0.81 1.14 0.51 0.64 1.02 0.64 0.91 1.14 0.51 0.64 0.91 0.41 0.64 0.81 0.450 0.600 0.720 0.950 0.450 0.600 0.720 0.950 0.580 0.700 0.820 0.950 0.680 0.790 0.920 1.220 0.770 0.890 1.200 1.500 0.880 0.890 1.200 1.500 0.880 1.160 1.420 2.000 1.200 1.450 1.750 1.200 1.400 1.750 1.150 1.400 1.750 1.400 1.700 2.000 1.400 1.660 2.000 1.360 1.660 2.000 m m 0.025 0.032 0.040 0.051 0.025 0.032 0.040 0.051 0.025 0.032 0.040 0.051 0.025 0.032 0.040 0.051 0.025 0.032 0.040 0.051 0.025 0.032 0.040 0.051 0.025 0.032 0.040 0.051 0.025 0.036 0.051 0.025 0.032 0.045 0.020 0.025 0.040 0.025 0.036 0.045 0.020 0.025 0.036 0.016 0.025 0.032 es ch In 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 F Nominal m m 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 es ch In SERIES PT IRON CORE 0.23 5.84 0.17 4.32 0.33 8.38 0.24 6.10 0.36 9.14 0.31 7.87 0.40 10.16 0.34 8.64 0.23 5.84 0.17 4.32 0.33 8.38 0.24 6.10 0.37 9.40 0.29 7.37 0.40 10.16 0.34 8.64 0.37 9.40 0.29 7.37 0.35 8.89 0.28 7.11 0.40 10.16 0.30 7.62 0.40 10.16 0.37 9.40 0.36 9.14 0.27 6.86 0.38 9.65 0.30 7.62 0.62 15.75 0.43 10.92 0.63 16.00 0.53 13.46 0.36 9.14 0.29 7.37 0.38 9.65 0.30 7.62 0.60 15.24 0.49 12.45 0.64 16.26 0.53 13.46 0.36 9.14 0.29 7.37 0.50 12.70 0.42 10.67 0.60 15.24 0.49 12.45 0.64 16.26 0.53 13.46 0.50 12.70 0.41 10.41 0.58 14.73 0.48 12.19 0.62 15.75 0.50 12.70 0.92 23.37 0.80 20.32 0.55 13.97 0.49 12.45 0.60 15.24 0.50 12.70 0.77 19.56 0.69 17.53 0.55 13.97 0.48 12.19 0.60 15.24 0.51 12.95 0.76 19.30 0.65 16.51 0.55 13.97 0.48 12.19 0.60 15.24 0.50 12.70 0.78 19.81 0.70 17.78 0.58 14.73 0.50 12.70 0.75 19.05 0.62 15.75 0.88 22.35 0.76 19.30 0.55 13.97 0.48 12.19 0.70 17.78 0.62 15.75 0.85 21.59 0.78 19.81 0.55 13.97 0.48 12.19 0.70 17.78 0.62 15.75 0.85 21.59 0.78 19.81 E Nominal m m es ch In m m 13.46 17.78 20.32 25.40 13.46 17.27 20.83 25.15 17.27 20.32 22.86 25.40 19.81 22.86 25.91 33.53 22.86 24.89 32.00 39.37 25.40 27.94 32.00 39.37 26.42 31.75 38.10 52.07 30.48 38.10 45.72 30.48 38.10 44.45 30.48 38.10 44.45 36.83 44.45 52.07 35.56 43.18 52.07 35.56 44.45 52.07 es ch In 0.53 0.70 0.80 1.00 0.53 0.68 0.82 0.99 0.68 0.80 0.90 1.00 0.78 0.90 1.02 1.32 0.90 0.98 1.26 1.55 1.00 1.10 1.26 1.55 1.04 1.25 1.50 2.05 1.20 1.50 1.80 1.20 1.50 1.75 1.20 1.50 1.75 1.45 1.75 2.05 1.40 1.70 2.05 1.40 1.75 2.05 D Min. C Nominal m m 6.1 7.4 10.6 12.8 4.9 6.8 9.3 13.2 4.4 6.6 7.0 10.4 3.8 5.6 7.0 11.0 3.9 5.2 7.4 10.6 3.5 5.1 7.8 10.3 3.4 5.7 7.7 12.3 3.8 6.1 9.1 3.3 5.5 7.3 2.4 4.7 6.0 3.4 5.0 8.0 2.6 3.7 6.4 1.8 3.1 5.9 es ch In 0.015 0.012 0.010 0.008 0.020 0.015 0.010 0.008 0.035 0.025 0.020 0.014 0.050 0.030 0.025 0.020 0.060 0.040 0.035 0.025 0.080 0.050 0.035 0.028 0.100 0.060 0.050 0.040 0.130 0.080 0.055 0.150 0.100 0.075 0.250 0.180 0.110 0.220 0.160 0.090 0.350 0.280 0.150 0.620 0.420 0.200 B Max. m m PT5-530 5 PT5-700 5 PT5-800 5 PT5-1000 5 PT10-530 10 PT10-680 10 PT10-820 10 PT10-990 10 PT25-680 25 PT25-800 25 PT25-900 25 PT25-1000 25 PT50-780 50 PT50-900 50 PT50-1020 50 PT50-1320 50 PT75-900 75 PT75-980 75 PT75-1260 75 PT75-1550 75 PT100-1000 100 PT100-1100 100 PT100-1260 100 PT100-1550 100 PT150-1040 150 PT150-1250 150 PT150-1500 150 PT150-2050 150 PT250-1200 250 PT250-1500 250 PT250-1800 250 PT300-1200 300 PT300-1500 300 PT300-1750 300 PT400-1200 400 PT400-1500 400 PT400-1750 400 PT500-1450 500 PT500-1750 500 PT500-2000 500 PT750-1400 750 PT750-1700 750 PT750-2050 750 PT1000-1400 1000 PT1000-1750 1000 PT1000-2050 1000 A Max. es ch In RT PA R E MB NU ) ps m (A C ID S) D HM TE (O RA X. Hz MA 1k @ R DC H) ( D. IN Power Toroids 11.43 15.24 18.30 24.13 11.43 15.24 18.30 24.13 14.73 17.78 20.83 24.13 17.27 20.07 23.37 30.99 19.56 22.61 30.48 38.10 22.35 22.61 30.48 38.10 22.35 29.46 36.07 50.80 30.48 36.83 44.45 30.48 35.56 44.45 29.21 35.56 44.45 35.56 43.18 50.80 35.56 42.16 50.80 34.54 42.16 50.80 Note: Vertical configuration is standard; add suffix "HM" for horizontal mounting FIGURE 1: STANDARD VERTICAL MOUNT FIGURE 2: HORIZONTAL MOUNT 270 Quaker Rd., East Aurora NY 14052 * Phone 716-652-3600 * Fax 716-652-4814 * E-mail: apisales@delevan.com * www.delevan.com 1/2009 API_newlayouts_single:APIcatalog_newlayouts 8/26/10 2:40 PM Page 105 er w Po ELECTRICAL PT SERIES (continued) PHYSICAL PARAMETERS s or ct du In % 15 D Typical E Max. 16.26 20.57 23.11 16.26 20.07 23.62 20.07 23.11 25.65 22.61 28.19 28.70 25.65 27.69 35.31 28.70 31.24 35.31 29.72 35.05 41.40 33.78 41.40 33.78 41.40 33.78 41.40 47.75 40.13 47.75 38.86 46.48 55.37 38.86 50.29 55.37 0.290 0.325 0.415 0.290 0.325 0.415 0.325 0.415 0.475 0.415 0.415 0.625 0.475 0.475 0.625 0.475 0.475 0.625 0.475 0.625 0.900 0.625 0.900 0.625 0.900 0.625 0.900 1.200 0.900 1.200 0.900 1.200 1.200 0.900 1.200 1.200 m m 0.640 0.810 0.910 0.640 0.790 0.930 0.790 0.910 1.010 0.890 1.110 1.130 1.010 1.090 1.390 1.130 1.230 1.390 1.170 1.380 1.630 1.330 1.630 1.330 1.630 1.330 1.630 1.880 1.580 1.880 1.530 1.830 2.180 1.530 1.980 2.180 es ch In FIGURE 3: 2-LEAD VERTICAL BASE MOUNT 0.63 0.81 1.02 0.63 0.81 1.02 0.63 0.81 1.02 0.63 0.81 1.02 0.63 0.81 1.02 0.63 0.81 1.02 0.63 0.81 1.27 0.63 1.27 0.63 1.27 0.51 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 m m SERIES PT VERTICAL MOUNT IRON CORE 0.580 14.73 0.340 8.64 0.220 5.59 0.025 0.650 16.51 0.450 11.43 0.300 7.62 0.032 0.830 21.08 0.450 11.43 0.300 7.62 0.040 0.580 14.73 0.340 8.64 0.220 5.59 0.025 0.650 16.51 0.450 11.43 0.300 7.62 0.032 0.830 21.08 0.450 11.43 0.300 7.62 0.040 0.650 16.51 0.450 11.43 0.300 7.62 0.025 0.830 21.08 0.450 11.43 0.300 7.62 0.032 0.950 24.13 0.600 15.24 0.450 11.43 0.040 0.830 21.08 0.450 11.43 0.300 7.62 0.025 0.830 21.08 0.450 11.43 0.300 7.62 0.032 1.250 31.75 0.700 17.78 0.500 12.70 0.040 0.950 24.13 0.600 15.24 0.450 11.43 0.025 0.950 24.13 0.600 15.24 0.450 11.43 0.032 1.250 31.75 0.700 17.78 0.500 12.70 0.040 0.950 24.13 0.600 15.24 0.450 11.43 0.025 0.950 24.13 0.600 15.24 0.450 11.43 0.032 1.250 31.75 0.700 17.78 0.500 12.70 0.040 0.950 24.13 0.600 15.24 0.450 11.43 0.025 1.250 31.75 0.700 17.78 0.500 12.70 0.032 1.500 38.10 0.800 20.32 0.600 15.24 0.050 1.250 31.75 0.700 17.78 0.500 12.70 0.025 1.500 38.10 0.800 20.32 0.600 15.24 0.050 1.250 31.75 0.700 17.78 0.500 12.70 0.025 1.500 38.10 0.800 20.32 0.600 15.24 0.050 1.250 31.75 0.700 17.78 0.500 12.70 0.020 1.500 38.10 0.800 20.32 0.600 15.24 0.050 1.750 44.45 0.900 22.86 0.700 17.78 0.050 1.450 36.83 0.800 20.32 0.600 15.24 0.050 1.750 44.45 0.900 22.86 0.700 17.78 0.050 1.400 35.56 0.800 20.32 0.600 15.24 0.050 1.700 43.18 0.900 22.86 0.700 17.78 0.050 2.050 52.07 0.900 22.86 0.700 17.78 0.050 1.400 35.56 0.800 20.32 0.600 15.24 0.050 1.750 44.45 0.900 22.86 0.700 17.78 0.050 2.050 52.07 0.900 22.86 0.700 17.78 0.050 F Typical es ch In m m es ch In m m 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 3 4 3 4 3 4 4 4 4 4 4 4 4 4 4 es ch In 6.1 7.4 10.6 4.9 6.8 9.3 4.4 6.6 7.0 3.8 5.6 7.0 3.9 5.2 7.4 3.5 5.1 7.8 3.4 5.7 7.7 3.8 6.1 3.3 5.5 2.4 4.7 6.0 3.4 5.0 2.6 3.7 6.4 1.8 3.1 5.9 C Typical m m 0.015 0.012 0.010 0.020 0.015 0.010 0.035 0.025 0.020 0.050 0.030 0.025 0.060 0.040 0.035 0.080 0.050 0.035 0.100 0.060 0.050 0.130 0.080 0.150 0.100 0.250 0.180 0.110 0.220 0.160 0.350 0.280 0.150 0.620 0.420 0.200 es ch In 5 5 5 10 10 10 25 25 25 50 50 50 75 75 75 100 100 100 150 150 150 250 250 300 300 400 400 400 500 500 750 750 750 1000 1000 1000 B Max. m m PT5-530-VM PT5-700-VM PT5-800-VM PT10-530-VM PT10-680-VM PT10-820-VM PT25-680-VM PT25-800-VM PT25-900-VM PT50-780-VM PT50-900-VM PT50-1020-VM PT75-900-VM PT75-980-VM PT75-1260-VM PT100-1000-VM PT100-1100-VM PT100-1260-VM PT150-1040-VM PT150-1250-VM PT150-1500-VM PT250-1200-VM PT250-1500-VM PT300-1200-VM PT300-1500-VM PT400-1200-VM PT400-1500-VM PT400-1750-VM PT500-1450-VM PT500-1750-VM PT750-1400-VM PT750-1700-VM PT750-2050-VM PT1000-1400-VM PT1000-1750-VM PT1000-2050-VM A Max. es ch In RT PA R E MB NU # RE GU FI ) ps m (A C ) ID D MS TE OH ( RA X. MA Hz 1k @ R DC H) ( D. IN Power Toroids 7.37 8.25 10.54 7.37 8.25 10.54 8.25 10.54 12.06 10.54 10.54 15.87 12.06 12.06 15.87 12.06 12.06 15.87 12.06 15.87 22.86 15.87 22.86 15.87 22.86 15.87 22.86 30.48 22.86 30.48 22.86 30.48 30.48 22.86 30.48 30.48 FIGURE 4: 4-LEAD VERTICAL BASE MOUNT 270 Quaker Rd., East Aurora NY 14052 * Phone 716-652-3600 * Fax 716-652-4814 * E-mail: apisales@delevan.com * www.delevan.com 1/2009 API_newlayouts_single:APIcatalog_newlayouts 8/26/10 2:41 PM Page 106 er w Po PTxxxR PT s or ct du In SERIES Power Toroids Horizontal or Vertical Mount KEY TO FIGURE 5 CURVE NUMBERS Graphs apply to all mounting styles. For more detailed graphs, contact factory. 1) PT5-530 2) PT10-530 3) PT5-700 4) PT5-800 5) PT10-680 6) PT5-1000 7) PT10-820 8) PT10-990 9) PT25-680 10) PT25-800 11) PT25-900 12) PT25-1000 13) PT50-780 14) PT50-900 15) PT75-900 16) PT75-980 17) PT50-1020 18) PT100-1000 19) PT100-1100 20) PT50-1320 21) PT150-1040 22) PT75-1260 23) PT100-1260 24) PT75-1550 25) PT100-1550 26) PT150-1250 27) PT150-1500 28) PT250-1200 29) PT300-1200 30) PT250-1500 31) PT400-1200 32) PT300-1500 33) PT400-1500 34) PT250-1800 35) PT150-2050 36) PT300-1750 37) PT500-1450 38) PT400-1750 39) PT750-1400 40) PT500-1750 41) PT1000-1400 42) PT750-1750 43) PT500-2000 44) PT1000-1750 45) PT750-2050 46) PT1000-2050 For more detailed graphs, contact factory 270 Quaker Rd., East Aurora NY 14052 * Phone 716-652-3600 * Fax 716-652-4814 * E-mail: apisales@delevan.com * www.delevan.com 1/2009 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: API Delevan: PT10-680 PT25-680VM PT50-780VM PT5-800 PT5-530 PT5-700 PT5-1000 PT10-530 PT10-820 PT10-990 PT25-680 PT25-800 PT25-900 PT25-1000 PT50-780 PT50-900 PT50-1020 PT50-1320 PT75-900 PT75-980 PT75-1260 PT75-1550 PT100-1000 PT100-1100 PT100-1260 PT100-1550 PT150-1040 PT150-1250 PT150-1500 PT150-2050 PT250-1200 PT250-1500 PT250-1800 PT300-1200 PT300-1500 PT300-1750 PT400-1200 PT4001500 PT400-1750 PT500-1450 PT500-1750 PT500-2000 PT750-1400 PT750-1700 PT750-2050 PT1000-1400 PT1000-1750 PT1000-2050 PT5-530-VM PT5-700-VM PT5-800-VM PT10-530-VM PT10-680-VM PT10-820-VM PT25-800-VM PT25-900-VM PT50-900-VM PT50-1020-VM PT75-900-VM PT75-980-VM PT75-1260-VM PT1001000-VM PT100-1100-VM PT100-1260-VM PT150-1040-VM PT150-1250-VM PT150-1500-VM PT250-1200-VM PT250-1500-VM PT300-1200-VM PT300-1500-VM PT400-1200-VM PT400-1500-VM PT400-1750-VM PT500-1450VM PT500-1750-VM PT750-1400-VM PT750-1700-VM PT750-2050-VM PT1000-1400-VM PT1000-1750-VM PT1000-2050-VM PT5R-530 PT5R-700 PT5R-800 PT5R-1000 PT10R-530 PT10R-680 PT10R-820 PT10R-990 PT25R-680 PT25R-800 PT25R-900 PT25R-1000 PT50R-780 PT50R-900 PT50R-1020 PT50R-1320 PT75R-900 PT75R-980