SERIES PTxxxR
PT
Power Toroids -
Horizontal or Vertical Mount
FIG. “1” STANDARD
VERTICAL
DASH NUMBER*
IND. (µH) ±15% @ 1 kHz
DCR MAXIMUM (OHMS)
RATED IDC (AMPS)
FIG. “2”
HORIZONTAL
FIG. “3” 2-LEAD
VERTICAL
FIG. “4” 4-LEAD
VERTICAL
PT SERIES POWER TOROIDS
PT5-530
PT5-700
PT5-800
PT5-1000
PT10-530
PT10-680
PT10-820
PT10-990
PT25-680
PT25-800
PT25-900
PT25-1000
PT50-780
PT50-900
PT50-1020
PT50-1320
PT75-900
PT75-980
PT75-1260
PT75-1550
PT100-1000
PT100-1100
PT100-1260
PT100-1550
PT150-1040
PT150-1250
PT150-1500
PT150-2050
PT250-1200
PT250-1500
PT250-1800
PT300-1200
PT300-1500
PT300-1750
PT400-1200
PT400-1500
PT400-1750
PT500-1450
PT500-1750
PT500-2000
PT750-1400
PT750-1700
PT750-2050
PT1000-1400
PT1000-1750
PT1000-2050
Power Inductors
270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: apisales@delevan.com • www.delevan.com
5
5
5
5
10
10
10
10
25
25
25
25
50
50
50
50
75
75
75
75
100
100
100
100
150
150
150
150
250
250
250
300
300
300
400
400
400
500
500
500
750
750
750
1000
1000
1000
0.015
0.012
0.010
0.008
0.020
0.015
0.010
0.008
0.035
0.025
0.020
0.014
0.050
0.030
0.025
0.020
0.060
0.040
0.035
0.025
0.080
0.050
0.035
0.028
0.100
0.060
0.050
0.040
0.130
0.080
0.055
0.150
0.100
0.075
0.250
0.180
0.110
0.220
0.160
0.090
0.350
0.280
0.150
0.620
0.420
0.200
6.1
7.4
10.6
12.8
4.9
6.8
9.3
13.2
4.4
6.6
7.0
10.4
3.8
5.6
7.0
11.0
3.9
5.2
7.4
10.6
3.5
5.1
7.8
10.3
3.4
5.7
7.7
12.3
3.8
6.1
9.1
3.3
5.5
7.3
2.4
4.7
6.0
3.4
5.0
8.0
2.6
3.7
6.4
1.8
3.1
5.9
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes to Figure 5 (Page 100) The PT Toroid Series inductance is specified at AC and DC signal levels which have no significant effect on the
permeability of the powdered iron toroidal core. Superimposed AC and DC voltages will change the permeability and therefore the inductance, under
operating conditions. Typically, DC currents will reduce the inductance, while AC signals will increase the inductance up to a point, before beginning to
decrease. Supporting information is provided, detailing the AC or DC effects upon each part. Saturation resulting from DC currents is specified with
waveform having less than a 1% ripple content. When considering the AC waveform, both the frequency and voltage level must be taken into account. As
an aid in defining what effect the alternating sine wave signal will have, the voltage/frequency factor curve can be used. To determine what change of
inductance can be expected at a given voltage level and frequency, simply divide the sinusoidal RMS voltage by the frequency. The voltage is in volts
and the frequency is in hertz. As an example, if using part number PT25-680 at a 1VRMS signal level, and a frequency of 25KHz, the voltage/frequency
factor is calculated to be: 1VRMS/25,000Hz = 40 x 10–6. Referring to the graph, a 39% increase in inductance would be expected.
Notes to Figure 6 (Page 100) Typical saturation effects as a function of DC flowing through the part. Data is representative of a DC waveform with
less than 1% ripple, and an AC waveform less than 10 gauss.
Note This information is intended to be used in assisting the designer in part selection. Each operating application may contain other variables which
must be considered in part selection; such as temperature effects, waveform distortion, etc.…
Delevan Sales/Engin eering staff is available to provide information as needed to fit each application.
Inductance tested at 1 kHz, <10 gauss and 0 ADC
DC Resistance at 25°C
Rated Idc based on 40°C maximum rise from 25°C ambient with
0 Arms
Windings single layered to maximize operating frequency and
minimize board space
Self leads solder coated to within 0.050" of seating plane
Other values available on request
Packaging Bulk only
Mounting Standard mounting is self-lead radial per Figure “1”.
Optional mounting methods are self-leaded horizontal per Figure
“2” or vertical base mounted per Figures “3” and “4”.
STANDARD
VERTICAL HORIZONTAL
VERTICAL
2-LEAD
VERTICAL
4-LEAD
FIGURE
1FIGURE
2
FIGURE
3FIGURE
4
*Complete part # must include series # PLUS the dash #
For surface finish information,
refer to www.delevanfinishes.com
MOUNTING AVAILABLE
1/2009
API_newlayouts_single:APIcatalog_newlayouts 8/26/10 2:39 PM Page 103
Power Inductors
270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: apisales@delevan.com • www.delevan.com
PT SERIES (continued)
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
IND.(µH) ± 15%@ 1 kHz
DCR MAX. (OHMS)
PART
NUMBER
RATED IDC (Amps)
A Max.
5
5
5
5
10
10
10
10
25
25
25
25
50
50
50
50
75
75
75
75
100
100
100
100
150
150
150
150
250
250
250
300
300
300
400
400
400
500
500
500
750
750
750
1000
1000
1000
0.015
0.012
0.010
0.008
0.020
0.015
0.010
0.008
0.035
0.025
0.020
0.014
0.050
0.030
0.025
0.020
0.060
0.040
0.035
0.025
0.080
0.050
0.035
0.028
0.100
0.060
0.050
0.040
0.130
0.080
0.055
0.150
0.100
0.075
0.250
0.180
0.110
0.220
0.160
0.090
0.350
0.280
0.150
0.620
0.420
0.200
6.1
7.4
10.6
12.8
4.9
6.8
9.3
13.2
4.4
6.6
7.0
10.4
3.8
5.6
7.0
11.0
3.9
5.2
7.4
10.6
3.5
5.1
7.8
10.3
3.4
5.7
7.7
12.3
3.8
6.1
9.1
3.3
5.5
7.3
2.4
4.7
6.0
3.4
5.0
8.0
2.6
3.7
6.4
1.8
3.1
5.9
0.53
0.70
0.80
1.00
0.53
0.68
0.82
0.99
0.68
0.80
0.90
1.00
0.78
0.90
1.02
1.32
0.90
0.98
1.26
1.55
1.00
1.10
1.26
1.55
1.04
1.25
1.50
2.05
1.20
1.50
1.80
1.20
1.50
1.75
1.20
1.50
1.75
1.45
1.75
2.05
1.40
1.70
2.05
1.40
1.75
2.05
13.46
17.78
20.32
25.40
13.46
17.27
20.83
25.15
17.27
20.32
22.86
25.40
19.81
22.86
25.91
33.53
22.86
24.89
32.00
39.37
25.40
27.94
32.00
39.37
26.42
31.75
38.10
52.07
30.48
38.10
45.72
30.48
38.10
44.45
30.48
38.10
44.45
36.83
44.45
52.07
35.56
43.18
52.07
35.56
44.45
52.07
B Max.
0.23
0.33
0.36
0.40
0.23
0.33
0.37
0.40
0.37
0.35
0.40
0.40
0.36
0.38
0.62
0.63
0.36
0.38
0.60
0.64
0.36
0.50
0.60
0.64
0.50
0.58
0.62
0.92
0.55
0.60
0.77
0.55
0.60
0.76
0.55
0.60
0.78
0.58
0.75
0.88
0.55
0.70
0.85
0.55
0.70
0.85
5.84
8.38
9.14
10.16
5.84
8.38
9.40
10.16
9.40
8.89
10.16
10.16
9.14
9.65
15.75
16.00
9.14
9.65
15.24
16.26
9.14
12.70
15.24
16.26
12.70
14.73
15.75
23.37
13.97
15.24
19.56
13.97
15.24
19.30
13.97
15.24
19.81
14.73
19.05
22.35
13.97
17.78
21.59
13.97
17.78
21.59
C Nominal
0.17
0.24
0.31
0.34
0.17
0.24
0.29
0.34
0.29
0.28
0.30
0.37
0.27
0.30
0.43
0.53
0.29
0.30
0.49
0.53
0.29
0.42
0.49
0.53
0.41
0.48
0.50
0.80
0.49
0.50
0.69
0.48
0.51
0.65
0.48
0.50
0.70
0.50
0.62
0.76
0.48
0.62
0.78
0.48
0.62
0.78
4.32
6.10
7.87
8.64
4.32
6.10
7.37
8.64
7.37
7.11
7.62
9.40
6.86
7.62
10.92
13.46
7.37
7.62
12.45
13.46
7.37
10.67
12.45
13.46
10.41
12.19
12.70
20.32
12.45
12.70
17.53
12.19
12.95
16.51
12.19
12.70
17.78
12.70
15.75
19.30
12.19
15.75
19.81
12.19
15.75
19.81
D Min.
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
E Nominal
0.025
0.032
0.040
0.051
0.025
0.032
0.040
0.051
0.025
0.032
0.040
0.051
0.025
0.032
0.040
0.051
0.025
0.032
0.040
0.051
0.025
0.032
0.040
0.051
0.025
0.032
0.040
0.051
0.025
0.036
0.051
0.025
0.032
0.045
0.020
0.025
0.040
0.025
0.036
0.045
0.020
0.025
0.036
0.016
0.025
0.032
0.64
0.81
1.02
1.30
0.64
0.81
1.02
1.30
0.64
0.81
1.02
1.30
0.64
0.81
1.02
1.30
0.64
0.81
1.02
1.30
0.64
0.81
1.02
1.30
0.64
0.81
1.02
1.30
0.64
0.91
1.30
0.64
0.81
1.14
0.51
0.64
1.02
0.64
0.91
1.14
0.51
0.64
0.91
0.41
0.64
0.81
F Nominal
0.450
0.600
0.720
0.950
0.450
0.600
0.720
0.950
0.580
0.700
0.820
0.950
0.680
0.790
0.920
1.220
0.770
0.890
1.200
1.500
0.880
0.890
1.200
1.500
0.880
1.160
1.420
2.000
1.200
1.450
1.750
1.200
1.400
1.750
1.150
1.400
1.750
1.400
1.700
2.000
1.400
1.660
2.000
1.360
1.660
2.000
11.43
15.24
18.30
24.13
11.43
15.24
18.30
24.13
14.73
17.78
20.83
24.13
17.27
20.07
23.37
30.99
19.56
22.61
30.48
38.10
22.35
22.61
30.48
38.10
22.35
29.46
36.07
50.80
30.48
36.83
44.45
30.48
35.56
44.45
29.21
35.56
44.45
35.56
43.18
50.80
35.56
42.16
50.80
34.54
42.16
50.80
ELECTRICAL PHYSICAL PARAMETERS
Note: Vertical configuration is standard; add suffix “HM” for horizontal mounting
SERIES PT IRON CORE
PT5-530
PT5-700
PT5-800
PT5-1000
PT10-530
PT10-680
PT10-820
PT10-990
PT25-680
PT25-800
PT25-900
PT25-1000
PT50-780
PT50-900
PT50-1020
PT50-1320
PT75-900
PT75-980
PT75-1260
PT75-1550
PT100-1000
PT100-1100
PT100-1260
PT100-1550
PT150-1040
PT150-1250
PT150-1500
PT150-2050
PT250-1200
PT250-1500
PT250-1800
PT300-1200
PT300-1500
PT300-1750
PT400-1200
PT400-1500
PT400-1750
PT500-1450
PT500-1750
PT500-2000
PT750-1400
PT750-1700
PT750-2050
PT1000-1400
PT1000-1750
PT1000-2050
Power Toroids
FIGURE 1: STANDARD VERTICAL MOUNT FIGURE 2: HORIZONTAL MOUNT
1/2009
API_newlayouts_single:APIcatalog_newlayouts 8/26/10 2:40 PM Page 104
FIGURE#
Power Inductors
270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: apisales@delevan.com • www.delevan.com
PT SERIES (continued)
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
IND.(µH) ± 15%@ 1 kHz
DCR MAX. (OHMS)
PART
NUMBER
RATED IDC (Amps)
A Max. B Max. C Typical D Typical E Max. F Typical
ELECTRICAL PHYSICAL PARAMETERS
Power Toroids
5
5
5
10
10
10
25
25
25
50
50
50
75
75
75
100
100
100
150
150
150
250
250
300
300
400
400
400
500
500
750
750
750
1000
1000
1000
0.015
0.012
0.010
0.020
0.015
0.010
0.035
0.025
0.020
0.050
0.030
0.025
0.060
0.040
0.035
0.080
0.050
0.035
0.100
0.060
0.050
0.130
0.080
0.150
0.100
0.250
0.180
0.110
0.220
0.160
0.350
0.280
0.150
0.620
0.420
0.200
6.1
7.4
10.6
4.9
6.8
9.3
4.4
6.6
7.0
3.8
5.6
7.0
3.9
5.2
7.4
3.5
5.1
7.8
3.4
5.7
7.7
3.8
6.1
3.3
5.5
2.4
4.7
6.0
3.4
5.0
2.6
3.7
6.4
1.8
3.1
5.9
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
3
4
3
4
3
4
4
4
4
4
4
4
4
4
4
0.580
0.650
0.830
0.580
0.650
0.830
0.650
0.830
0.950
0.830
0.830
1.250
0.950
0.950
1.250
0.950
0.950
1.250
0.950
1.250
1.500
1.250
1.500
1.250
1.500
1.250
1.500
1.750
1.450
1.750
1.400
1.700
2.050
1.400
1.750
2.050
14.73
16.51
21.08
14.73
16.51
21.08
16.51
21.08
24.13
21.08
21.08
31.75
24.13
24.13
31.75
24.13
24.13
31.75
24.13
31.75
38.10
31.75
38.10
31.75
38.10
31.75
38.10
44.45
36.83
44.45
35.56
43.18
52.07
35.56
44.45
52.07
0.340
0.450
0.450
0.340
0.450
0.450
0.450
0.450
0.600
0.450
0.450
0.700
0.600
0.600
0.700
0.600
0.600
0.700
0.600
0.700
0.800
0.700
0.800
0.700
0.800
0.700
0.800
0.900
0.800
0.900
0.800
0.900
0.900
0.800
0.900
0.900
8.64
11.43
11.43
8.64
11.43
11.43
11.43
11.43
15.24
11.43
11.43
17.78
15.24
15.24
17.78
15.24
15.24
17.78
15.24
17.78
20.32
17.78
20.32
17.78
20.32
17.78
20.32
22.86
20.32
22.86
20.32
22.86
22.86
20.32
22.86
22.86
0.220
0.300
0.300
0.220
0.300
0.300
0.300
0.300
0.450
0.300
0.300
0.500
0.450
0.450
0.500
0.450
0.450
0.500
0.450
0.500
0.600
0.500
0.600
0.500
0.600
0.500
0.600
0.700
0.600
0.700
0.600
0.700
0.700
0.600
0.700
0.700
5.59
7.62
7.62
5.59
7.62
7.62
7.62
7.62
11.43
7.62
7.62
12.70
11.43
11.43
12.70
11.43
11.43
12.70
11.43
12.70
15.24
12.70
15.24
12.70
15.24
12.70
15.24
17.78
15.24
17.78
15.24
17.78
17.78
15.24
17.78
17.78
0.025
0.032
0.040
0.025
0.032
0.040
0.025
0.032
0.040
0.025
0.032
0.040
0.025
0.032
0.040
0.025
0.032
0.040
0.025
0.032
0.050
0.025
0.050
0.025
0.050
0.020
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.050
0.63
0.81
1.02
0.63
0.81
1.02
0.63
0.81
1.02
0.63
0.81
1.02
0.63
0.81
1.02
0.63
0.81
1.02
0.63
0.81
1.27
0.63
1.27
0.63
1.27
0.51
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
1.27
0.640
0.810
0.910
0.640
0.790
0.930
0.790
0.910
1.010
0.890
1.110
1.130
1.010
1.090
1.390
1.130
1.230
1.390
1.170
1.380
1.630
1.330
1.630
1.330
1.630
1.330
1.630
1.880
1.580
1.880
1.530
1.830
2.180
1.530
1.980
2.180
16.26
20.57
23.11
16.26
20.07
23.62
20.07
23.11
25.65
22.61
28.19
28.70
25.65
27.69
35.31
28.70
31.24
35.31
29.72
35.05
41.40
33.78
41.40
33.78
41.40
33.78
41.40
47.75
40.13
47.75
38.86
46.48
55.37
38.86
50.29
55.37
0.290
0.325
0.415
0.290
0.325
0.415
0.325
0.415
0.475
0.415
0.415
0.625
0.475
0.475
0.625
0.475
0.475
0.625
0.475
0.625
0.900
0.625
0.900
0.625
0.900
0.625
0.900
1.200
0.900
1.200
0.900
1.200
1.200
0.900
1.200
1.200
7.37
8.25
10.54
7.37
8.25
10.54
8.25
10.54
12.06
10.54
10.54
15.87
12.06
12.06
15.87
12.06
12.06
15.87
12.06
15.87
22.86
15.87
22.86
15.87
22.86
15.87
22.86
30.48
22.86
30.48
22.86
30.48
30.48
22.86
30.48
30.48
SERIES PT VERTICAL MOUNT IRON CORE
PT5-530-VM
PT5-700-VM
PT5-800-VM
PT10-530-VM
PT10-680-VM
PT10-820-VM
PT25-680-VM
PT25-800-VM
PT25-900-VM
PT50-780-VM
PT50-900-VM
PT50-1020-VM
PT75-900-VM
PT75-980-VM
PT75-1260-VM
PT100-1000-VM
PT100-1100-VM
PT100-1260-VM
PT150-1040-VM
PT150-1250-VM
PT150-1500-VM
PT250-1200-VM
PT250-1500-VM
PT300-1200-VM
PT300-1500-VM
PT400-1200-VM
PT400-1500-VM
PT400-1750-VM
PT500-1450-VM
PT500-1750-VM
PT750-1400-VM
PT750-1700-VM
PT750-2050-VM
PT1000-1400-VM
PT1000-1750-VM
PT1000-2050-VM
FIGURE 3: 2-LEAD VERTICAL BASE MOUNT FIGURE 4: 4-LEAD VERTICAL BASE MOUNT
1/2009
API_newlayouts_single:APIcatalog_newlayouts 8/26/10 2:40 PM Page 105
Power Inductors
270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: apisales@delevan.com • www.delevan.com
SERIES PTxxxR
PT
Power Toroids -
Horizontal or Vertical Mount
1) PT5-530
2) PT10-530
3) PT5-700
4) PT5-800
5) PT10-680
6) PT5-1000
7) PT10-820
8) PT10-990
9) PT25-680
10) PT25-800
11) PT25-900
12) PT25-1000
13) PT50-780
14) PT50-900
15) PT75-900
16) PT75-980
17) PT50-1020
18) PT100-1000
19) PT100-1100
20) PT50-1320
21) PT150-1040
22) PT75-1260
23) PT100-1260
24) PT75-1550
25) PT100-1550
26) PT150-1250
27) PT150-1500
28) PT250-1200
29) PT300-1200
30) PT250-1500
31) PT400-1200
32) PT300-1500
33) PT400-1500
34) PT250-1800
35) PT150-2050
36) PT300-1750
37) PT500-1450
38) PT400-1750
39) PT750-1400
40) PT500-1750
41) PT1000-1400
42) PT750-1750
43) PT500-2000
44) PT1000-1750
45) PT750-2050
46) PT1000-2050
KEY TO FIGURE 5 CURVE NUMBERS Graphs apply to all mounting styles. For more detailed graphs, contact factory.
For more detailed graphs, contact factory
1/2009
API_newlayouts_single:APIcatalog_newlayouts 8/26/10 2:41 PM Page 106
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
API Delevan:
PT10-680 PT25-680VM PT50-780VM PT5-800 PT5-530 PT5-700 PT5-1000 PT10-530 PT10-820 PT10-990
PT25-680 PT25-800 PT25-900 PT25-1000 PT50-780 PT50-900 PT50-1020 PT50-1320 PT75-900 PT75-980
PT75-1260 PT75-1550 PT100-1000 PT100-1100 PT100-1260 PT100-1550 PT150-1040 PT150-1250 PT150-1500
PT150-2050 PT250-1200 PT250-1500 PT250-1800 PT300-1200 PT300-1500 PT300-1750 PT400-1200 PT400-
1500 PT400-1750 PT500-1450 PT500-1750 PT500-2000 PT750-1400 PT750-1700 PT750-2050 PT1000-1400
PT1000-1750 PT1000-2050 PT5-530-VM PT5-700-VM PT5-800-VM PT10-530-VM PT10-680-VM PT10-820-VM
PT25-800-VM PT25-900-VM PT50-900-VM PT50-1020-VM PT75-900-VM PT75-980-VM PT75-1260-VM PT100-
1000-VM PT100-1100-VM PT100-1260-VM PT150-1040-VM PT150-1250-VM PT150-1500-VM PT250-1200-VM
PT250-1500-VM PT300-1200-VM PT300-1500-VM PT400-1200-VM PT400-1500-VM PT400-1750-VM PT500-1450-
VM PT500-1750-VM PT750-1400-VM PT750-1700-VM PT750-2050-VM PT1000-1400-VM PT1000-1750-VM
PT1000-2050-VM PT5R-530 PT5R-700 PT5R-800 PT5R-1000 PT10R-530 PT10R-680 PT10R-820 PT10R-990
PT25R-680 PT25R-800 PT25R-900 PT25R-1000 PT50R-780 PT50R-900 PT50R-1020 PT50R-1320 PT75R-900
PT75R-980
