More information online at bannerengineering.com369
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
Miscellaneous
Stands and Mounting Systems page 441
Apertures and Aperture Kits 443
Replacement Lens Assemblies 445
Alignment Tools 446
Power Supplies & Interface Modules 447
Sensing Accessories
Mounting Brackets page 370
• Using the right bracket ensures optimum performance from your Banner sensors.
• Stainless steel and reinforced thermoplastic polyester mounts reduce installation time
and lower total installed cost.
• Choice includes angled, through-hole brackets and split-clamp models that mount to a
at surface.
• Versatile swivel-mount models mount at and have an adjustable ball to position the
sensor at any angle.
• Custom brackets can be designed for your unique applications.
Quick-Disconnect (QD) Cables page 410
• Allow sensors to be replaced or moved quickly, minimizing downtime.
- Pico- (M8), Euro- (M12), and Mini-styles are available for dc powered sensors.
- Micro- and Mini-styles are available for ac powered sensors.
- Choose straight or right-angle connectors.
Retroreflectors and Tape page 425
• Banner offers a complete line of high-quality acrylic targets, high-temperature targets
and adhesive-backed retroreective tapes (not shown).
• Numerous sizes, shapes and mounting options meet your application requirements.
• New high-reectivity models dramatically increase sensing ranges, with reectivity
factors up to 3x.
• Maximum temperature ratings range from 50° to 480° C.
• Various mounting options are available.
Harsh Duty Enclosures & Lens Shields page 436
• Lens shields protect emitter/receiver from impact and contamination.
• Tubular enclosures guard entire EZ-ARRAY™ emitter/receiver in washdown environments.
• Heated enclosures protect MINI-ARRAY® emitter/receiver in outdoor environments.
Previous
Section
370 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
Banner Bracket Selection Chart
Sensor Used With
WORLD-BEAM® Q12
page 46
SMBQ12A
page 393
SMBQ12T
page 394
T8
page 49
SMB8MM
page 383
MINI-BEAM®2
page 52
SMBQS12PD
page 396
SMBQ12S
page 396
M12
page 55
SMBQS12PD
page 396
VS1
page 58
SMBVS1S
page 400
SMBVS1SC
page 400
SMBVS1T
page 401
SMBVS1TC
page 401
VS2
page 61
SMBVS2RA
page 401
VS3
page 64
SMBVS3S
page 401
SMBVS3T
page 402
VS4
page 67
SMBVS4SRA
page 402
WORLD-BEAM®
QS18
page 70
SMB18A
page 377
SMB18FA
page 377
SMB18FM
page 377
SMB18Q
page 377
SMB18SF
page 378
SMB18UR
page 378
SMB3018SC
page 378
SMB30SK
page 380
SMB30SUS
page 380
SMB312PD
page 381
SMB312S
page 380
SMB4050YL
page 381
SMB46A
page 381
SMB46L
page 382
SMB46S
page 382
SMB46U
page 382
SMBAMS18P
page 384
SMBAMS18RA
page 384
SMBQS18A
page 397
SMBQS18AF
page 397
SMBQS18DIN
page 397
SMBQS18RA
page 397
SMBQS18Y
page 398
SMBQS18YL
page 398
SMH241F
page 402
MINI-BEAM®
page 79
SMB18A
page 377
SMB18FA
page 377
SMB18Q
page 377
SMB18SF
page 378
SMB18UR
page 378
SMB3018SC
page 378
SMB30SK
page 380
SMB30SUS
page 380
SMB312B
page 380
SMB312PD
page 381
SMB312S
page 380
SMB46L
page 382
SMB46S
page 382
SMB46U
page 382
SMBAMS18P
page 384
SMBAMS18RA
page 384
SMH241F
page 402
WORLD-BEAM® Q20
page 92
SMBQ20
page 394
SMBQ20L
page 395
SMBQ20LV
page 395
SMBQ20U
page 395
S18
page 95
SMB18A
page 377
SMB18FA
page 377
SMB18FM
page 377
SMB18Q
page 377
SMB18SF
page 378
SMB18UR
page 378
SMB3018SC
page 378
SMB30SK
page 380
SMB312PD
page 381
SMB46A
page 381
SMBAMS18P
page 384
SMBAMS18RA
page 384
M18
page 95
SMB18A
page 377
SMB18FA
page 377
SMB18FM
page 377
SMB18Q
page 377
SMB18SF
page 378
SMB18UR
page 378
SMB3018SC
page 378
SMB30SK
page 380
SMB312PD
page 381
SMB30SK
page 380
SMB312PD
page 381
SMBAMS18P
page 384
SMBAMS18RA
page 384
More information online at bannerengineering.com371
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
Sensor Used With
T18
page 101
SMB1815SF
page 376
SMB18A
page 377
SMB18FA
page 377
SMB18FM
page 377
SMB18Q
page 377
SMB18SF
page 378
SMB18UR
page 378
SMB3018SC
page 378
SMB30SK
page 380
SMB312PD
page 381
SMBAMS18P
page 384
SMBAMS18RA
page 384
SMBT18Y
page 400
Q25
page 106
SMB18A
page 377
SMB18FA
page 377
SMB18Q
page 377
SMB18SF
page 378
SMB18UR
page 378
SMB3018SC
page 378
SMB30SK
page 380
SMB312PD
page 381
WORLD-BEAM®
QS30
page 112
SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 379
SMB30Q
page 379
SMB30SC
page 382
SMB46L
page 382
SMB46S
page 382
SMBAMS30P
page 384
SMBAMSRAB
page 387
SMBQS30L
page 398
SMBQS30LT
page 398
SMBQS30Y
page 399
SMBQS30YL
page 399
S30
page 121 SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 379
SMB30Q
page 379
SMB30SC
page 379
SMBAMS30P
page 384
SMBAMS30RA
page 385
SM30/SMI30
page 125 SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 379
SMB30Q
page 379
SMB30SC
page 379
SMBAMS30P
page 384
SMBAMS30RA
page 385
T30
page 129
SMB1815SF
page 376
SMB30SC
page 379
SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 379
SMB30Q
page 379
SMBAMS30P
page 384
SMBAMS30RA
page 385
Q40
page 133 SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 379
SMB30Q
page 379
SMB30SC
page 379
SMBAMS30P
page 384
SAMBAMS30RA
page 385
PicoDot®
page 137 SMB46A
page 381
SMB46L
page 382
SMB46S
page 382
SMB46U
page 382
QM42/QMT42
page 140
SMB3018SC
page 378
SMB30SK
page 380
SMB30SUS
page 380
SMB312S
page 381
SMB42T
page 381
SMB46L
page 382
SMB46S
page 382
SMB46U
page 382
SMH241F
page 402
Q45
page 146
SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 379
SMB30Q
page 379
SMB30SC
page 379
SMB30UR
page 380
SMBAMS30P
page 384
SAMBAMS30RA
page 385
OMNI-BEAM™
page 159
SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 379
SMB30Q
page 379
SMB30SC
page 379
SMB30UR
page 380
SMBAMS30P
page 384
SAMBAMS30RA
page 385
Q60
page 165
SMBAMSQ60IP
page 386
SMBAMSQ60P
page 387
SMBQ60
page 396
D10
page 172
DIN-35-..
page 375
SMBR55F01
page 399
SMBR55FRA
page 399
Banner Bracket Selection Chart
More on
next page
372 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
Banner Bracket Selection Chart (cont’d)
Sensor Used With
D12
page 178
DIN-35-..
page 375
SMBR55F01
page 379
SMBR55FRA
page 399
R55F
page 183
DIN-35-..
page 375
SMBR55F01
page 399
SMBR55FRA
page 399
FI22
page 186 N/A
LX
page 212
SMBLX
page 390
SMBLXR
page 391
SLM
page 216 N/A
SL10/SL30
page 219
SMBSL
page 400
C-GAGE® SLC1
page 222 N/A
R58E
page 225
SMB55A
page 382
SMB55F
page 383
SMB55RA
page 383
SMB55S
page 383
QC50/QCX50
page 228
SMBQC50
page 396
QL50/QL55
page 230
SMB55A
page 382
SMB55F
page 383
SMB55RA
page 383
SMB55S
page 383
OTB/LTB/STB
page 234
SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 379
SMB30Q
page 379
SMB30SC
page 379
SMBAMS30P
page 384
SMBAMS30RA
page 385
L-GAGE® LT3
page 244
SMBAMSLT3IP
page 386
SMBAMSLT3P
page 386
SMBLT31
page 389
SMBLT32
page 389
SMBLT3IP
page 390
L-GAGE® LT7
page 248
SMBLT7
page 390
SMBLT7F
page 390
L-GAGE® LG5/LG10
page 252
SMBLG
page 389
SMBLGA
page 389
L-GAGE® Q50
page 256
SMBQ50
page 395
U-GAGE® QT50U
page 262
SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 379
SMB30SC
page 379
SMBAMS30P
page 384
SMBAMS30RA
page 385
More information online at bannerengineering.com373
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
Banner Bracket Selection Chart
Sensor Used With
U-GAGE® S18U
page 266
SMB18A
page 377
SMB18FA
page 377
SMB18FM
page 377
SMB18Q
page 377
SMB18SF
page 378
SMB18UR
page 378
SMB3018SC
page 378
SMB30SK
page 380
SMB312PD
page 381
SMBAMS18P
page 384
SMBAMS18RA
page 384
QS18U
page 269
SMB18A
page 377
SMB18FA
page 377
SMB18FM
page 377
SMB18Q
page 377
SMB18SF
page 378
SMB18UR
page 378
SMB3018SC
page 378
SMB30SK
page 380
SMB30SUS
page 380
SMB312PD
page 381
SMB312S
page 381
SMB46A
page 381
SMB46L
page 382
SMB46S
page 382
SMB46U
page 382
SMBAMS18P
page 384
SMBAMS18RA
page 384
SMBQS18A
page 397
SMBQS18RA
page 397
SMBQS18Y
page 398
SMH241F
page 402
U-GAGE® T30U
page 272
SMB1815SF
page 376
SMB30A
page 378
SMB30FA
page 379
SMBAMS30P
page 384
SMBAMS30RA
page 385
U-GAGE® Q45U
page 276
SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 379
SMB30Q
page 379
SMB30SC
page 379
SMB30UR
page 380
SMBAMS30P
page 384
SMBAMS30RA
page 385
U-GAGE® Q45UR
page 280
SMB18A
page 377
SMB18FA
page 377
SMB18Q
page 377
SMB18SF
page 378
SMB18UR
page 378
SMB3018SC
page 378
SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 379
SMB30Q
page 379
SMB30SC
page 379
SMB30SK
page 380
SMB30UR
page 380
SMB312PD
page 381
SMBAMS18P
page 384
SMBAMS18RA
page 384
SMBAMS30P
page 384
SMBAMS30RA
page 385
U-GAGE® T18U
page 284
SMB1815SF
page 376
SMB18A
page 377
SMB18FA
page 377
SMB18Q
page 377
SMB18SF
page 378
SMB18UR
page 378
SMB3018SC
page 378
SMB30SK
page 380
SMB312PD
page 381
SMBAMS18P
page 384
SMBAMS18RA
page 384
SMBT18Y
page 400
A-GAGE®
EZ-ARRAY™
page 288
EZA-MBK-20
page 375
A-GAGE®
MINI-ARRAY®
page 291
DIN-35-..
page 375
MSMB-3
page 375
T-GAGE® M18T
page 303
SMB18A
page 377
SMB18FA
page 377
SMB18FM
page 377
SMB18SF
page 378
SMB18UR
page 378
SMB30SK
page 380
SMB312PD
page 381
SMB46A
page 381
SMBAMS18P
page 384
SMBAMS18RA
page 384
R-GAGE™ QT50R
page 306
SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 379
SMB30SC
page 379
SMBAMS30P
page 384
SMBAMS30RA
page 385
EZ-LIGHT™ K50
page 346
SA-K50A18
page 376
SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 379
SMB30Q
page 379
SMB30SC
page 379
SMBAMS30P
page 384
SMBAMS30PL52
page 384
SMBAMS30PL52R
page 385
SMBAMS30RA
page 385
SMBAMS30RLJ
page 385
SMBAMS30RLS
page 385
EZ-LIGHT™ K80
page 346
SMBDX80DIN
page 387
More on
next page
374 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
Sensor Used With
EZ-LIGHT™ VTB
page 358
SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 379
SMB30Q
page 379
SMB30SC
page 379
SMBAMS30P
page 384
SMBAMS30PL52
page 384
SMBAMS30PL52R
page 385
SMBAMS30RA
page 385
SMBAMS30RLJ
page 385
SMBAMS30RLS
page 385
EZ-LIGHT™ PVA
page 354
SMBPVA1
page 391
SMBPVA2
page 391
SMBPVA..
page 392
SMBPVA..A
page 392
SMBPVA..AB
page 392
SMBPVA..C
page 392
SMBPVA6
page 392
SMBPVA7
page 393
SMBPVA8
page 393
SMBPVA9
page 393
EZ-LIGHT™ PVD
page 351
SMBPVA1
page 391
SMBPVA11
page 391
SMBPVA2
page 391
SMBPVA..C
page 392
SMBPVA6
page 392
SMBPVA7
page 393
SMBPVA8
page 393
SMBPVA9
page 393
SMBPVD..A
page 394
SMBPVD..AB
page 394
EZ-LIGHT™ T8L
page 361
SMB8MM
page 383
EZ-LIGHT™ T18/M18
page 361
SMB1815SF
page 376
SMB18A
page 377
SMB18FA
page 377
SMB18Q
page 377
SMB18SF
page 378
SMB18UR
page 378
SMB3018SC
page 378
SMB30SK
page 380
SMB312PD
page 381
SMBAMS18P
page 384
SMBAMS18RA
page 384
SMBT18Y
page 400
EZ-LIGHT™
T30/K50L
page 361
SMB1815SF
page 376
SMB30A
page 378
SMB30FA
page 379
SMB30MM
page 329
SMB30Q
page 379
SMB30SC
page 379
SMBAMS30P
page 384
SMBAMS30PL52R
page 385
SMBAMS30PL52
page 384
SMBAMS30RA
page 385
SMBAMS30RLJ
page 385
SMBAMS30RLS
page 385
EZ-LIGHT™ K80L
page 361
SMBDX80DIN
page 387
SureCross™
DX80/DX85/DX70
page 335
SMBDX80DIN
page 387
Banner Bracket Selection Chart (cont’d)
More information online at bannerengineering.com375
SLOT & LABEL PART & AREA
cABLES RETROREFLEcTORS MIScELLANEOUS
ENcLOSURES/
LENS SHIELDS
BRAckETS
BRAckETS – ACCESSORIES
DIN-35..
7.6
L
35
All measurements in mm
Model Length (L)
DIN-35-70 70
DIN-35-105 105
DIN-35-140 140
Hole center spacing: 35.1
Hole size: 25.4 x 5.3
• Available in 70, 105 & 140 mm
lengths
Sensors
Used with
D10
D12
R55F
Controllers
Used with
MINI-ARRAY
High-Resolution MINI-ARRAY
EZA-MBK-20
50.0
39.2
58.2
A
B
C
All measurements in mm
Hole center spacing: A = 44.4,
B = 20.0, C = 40.0
Hole size: A = 10.2 x 5.4,
B = 27.6 x 7.0, C = 25.0 x 7.0
• Two-bracket kit for one
emitter or receiver
• Adapter brackets for mounting
to engineered/slotted aluminum
framing such as 80/20™ and
Unistrut™
Sensors
Used with
EZ-ARRAY
MSMB-3
57.3
24.2
53.4
A
B
All measurements in mm
Hole center spacing:
A, B = 44.5
Hole size: A, B = 10.2 x 4.8
• Two-bracket replacement kit for
the emitter or receiver
• 11-ga. cold-rolled steel with
black corrosion-resistant zinc
chromate nish
Sensors
Used with
High-Resolution MINI-ARRAY
MINI-ARRAY
RMB50
62
26
68
A
B
E
D
C
All measurements in mm
Hole center spacing:
A, B = 34.0, A to B = 52.0,
E = 26.0
Hole size: A, B = ø 0.5,
C = ø 6.3, D = ø 4.5,
E = 13.8 X 4.5
• Protective mounting bracket
for retroreective targets
• 14-ga. 316 stainless steel
• Stainless steel M3 x 0.5
hardware included
Round Targets
Used with
BRT-50D
BRT-50R
Square Targets
Used with
BRT-2X2
Rectangular Targets
Used with
BRT-60X40c
376 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
RMB85
92
C
30
95
A
B
D
E
All measurements in mm
Hole center spacing:
A, B, A to B = 77.0, E = 46.0
Hole size: A, B = ø 0.5,
C = ø 4.8, D = ø 4.5,
E = 19.0 x 4.5
• Protective mounting bracket
for retroreective targets
• 14-ga. 316 stainless steel
• Stainless steel M3 x 0.5
hardware included
Round Targets
Used with
BRT-3
Square Targets
Used with
BRT-77X77C
RMB100
107
34
110
A
C
E
D
B
F
G
All measurements in mm
Hole center spacing:
A, B, A to B = 92.0,
C, D, C to D = 77.0, G = 56.0
Hole size: A, B, C, D = ø 0.5,
E = ø 4.8, F = ø 4.5, G = 21.5 x 4.5
• Protective mounting bracket
for retroreective targets
• 14-ga. 316 stainless steel
• Stainless steel M3 x 0.5
hardware included
Round Targets
Used with
BRT-3
BRT-84
Square Targets
Used with
BRT-77X77C
BRT-92X92C
BRT-92X92CB
SA-K50A18
48
44
46
A
All measurements in mm
Hole size: A = ø 30.5
• Protective mounting bracket for
EZ-LIGHT™ K50 sensors
• 12-ga cold-rolled steel
Base Mount
Used with
K50
SMB1815SF
25.4
42
50.8
A
B
All measurements in mm
Hole center spacing: A = 36.0
Hole size: A = ø 5.0, B = ø 15.0
• Swivel with set screws for mounting
sensors by the cable hub
• Black reinforced thermoplastic
polyester
• Stainless steel swivel locking
hardware and hex wrench included
Base Mount
Used with
T18
T18U
T30
T30U
EZ-LIGHT T18
EZ-LIGHT T30
More information online at bannerengineering.com377
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
SMB18A
41
30
46
A
B
C
All measurements in mm
Hole center spacing:
A to B = 24.2
Hole size: A = ø 4.6, B = 17.0 x 4.6,
C = ø 18.5
• Right-angle mounting bracket
with a curved slot for versatile
orientation
• 12-ga. stainless steel, 18 mm
sensor mounting hole
• Clearance for M4 (#8) hardware
Barrel Mount
Used with
QS18
MINI-BEAM
M18
S18
T18
T-GAGE M18T
S18U
QS18U
Q45UR M18C2
Q45UR S18C2
T18U
EZ-LIGHT T18
EZ-LIGHT M18
Base Mount
Used with
Q25
SMB18FA
25.9
68.9
66.4
B
A
All measurements in mm
A = 3/8 - 16 x 50.8
Hole size: B = ø 18.1
• Swivel bracket with tilt and
pan movement for precision
adjustment
• 18 mm sensor mounting hole
• 12-ga. 304 stainless steel
Barrel Mount
Used with
QS18
MINI-BEAM
S18/M18/T18
S18U
QS18U
Q45UR M18C2
Q45UR S18C2
T18U
T-GAGE M18T
EZ-LIGHT M18
EZ-LIGHT T18
Bracket-to-Bracket
Used with
SMBQS18A SMBQS18Y
Base Mount
Used with
Q25
SMB18FM
11.1
ø 30
All measurements in mm
N/A
• Two-piece thermoplastic
through-mount bracket
• Mounting nut (M22 x 1.5) and
outer ange (M22 x 1.5 external,
M18 x 1 internal)
Barrel Mount
Used with
QS18
M18
S18
T18
T-GAGE M18T
S18U
QS18U
SMB18Q
41
30
46
A
B
C
All measurements in mm
Hole center spacing:
A to B = 24.2
Hole size: A = ø 4.6, B = 17.0 x 4.6,
C = ø 19.0
• Right-angle anged bracket
• 18 mm sensor mounting hole
• 12-ga. stainless steel
Barrel Mount
Used with
QS18
MINI-BEAM
S18
M18
T18
S18U
QS18U
Q45UR S18C2
Q45UR M18C2
T18U
EZ-LIGHT T18
EZ-LIGHT M18
Base Mount
Used with
Q25
378 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
SMB18SF
50.8
42
25.4 A
All measurements in mm
Hole center spacing: A = 36.0
Hole size: A = ø 5.3
• 18 mm swivel bracket with
M18 x 1 internal thread
• Black thermoplastic polyester
• Stainless steel swivel locking
hardware included
Barrel Mount
Used with
QS18
MINI-BEAM
S18
M18
T18
T-GAGE M18T
S18U
QS18U
Q45UR S18C2
Q45UR M18C2
T18U
EZ-LIGHT T18
EZ-LIGHT M18
Base Mount
Used with
Q25
SMB18UR
137.2
41.7
63.5
BA
C
All measurements in mm
Hole center spacing: A = 25.4,
B = 46.7
Hole size: A, B = 6.9 x 32.0,
C = ø 18.3
• 2-piece universal swivel bracket
• 300 series stainless steel
• Stainless steel swivel
locking hardware included
• Mounting hole for 18 mm sensor
Barrel Mount
Used with
QS18*
MINI-BEAM
S18
M18
T18
T-GAGE M18T
S18U
QS18U*
Q45UR S18C2
Q45UR M18C2
T18U
EZ-LIGHT T18
EZ-LIGHT M18
Base Mount
Used with
Q25
* Contact factory to verify compatibility with
integral QD models.
SMB3018SC
68
56.7
29
A
All measurements in mm
Hole center spacing: A = 50.8
Hole size: A = ø 7.0
• 18 mm swivel side or barre
mount bracket
• Black reinforced thermoplastic
polyester
• Stainless steel swivel locking
hardware included
Barrel Mount
Used with
M18/S18/T18
S18U
Q45UR S18C2
Q45UR M18C2
T18U
EZ-LIGHT T18
Side Mount
Used with
QS18
MINI-BEAM
QM42/QMT42
QS18U
Base Mount
Used with
Q25
SMB30A
61
45
69
A
B
C
All measurements in mm
Hole center spacing:
A to B = 40.0
Hole size: A = ø 6.3, B = 27.3 x 6.3,
A = ø 30.5
• Right-angle bracket with curved
slot for versatile orientation
• Clearance for M6 (¼") hardware
• Mounting hole for 30 mm sensor
• 12-ga. stainless steel
Barrel Mount
Used with
QS30
SM30/SMI30
S30
T30
T30U
EZ-LIGHT T30
Base Mount
Used with
Q40
Q45
OMNI-BEAM
OTB/LTB
VTB
STB
Q45U
Q45UR
QT50R
QT50U
K50
EZ-LIGHT K50L
More information online at bannerengineering.com379
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
SMB30FA
36.3
68.9
83.2
A
B
All measurements in mm
A = 3/8 -16 x 50.8
Hole size: B = ø 30.1
• Swivel bracket with tilt and
pan movement for precision
adjustment
• Mounting hole for 30 mm sensor
• 12-ga. 304 stainless steel
Barrel Mount
Used with
QS30
SM30/SMI30
S30
T30
T30U
EZ-LIGHT T30
Base Mount
Used with
Q40
Q45
Q45U
Q45UR
QT50U
OMNI-BEAM
OTB/LTB
VTB
STB
K50
QT50R
EZ-LIGHT K50L
SMB30MM
57. 2
69.9 57.2
A
B
C
All measurements in mm
Hole center spacing: A = 51.0,
A to B = 25.4
Hole size: A = 42.6 x 7.0,
B = ø 6.4, B = ø 30.1
• 12-ga. stainless steel bracket
with curved mounting slots for
versatility and orientation
• Clearance for M6 (¼") hardware
• Mounting hole for 30 mm sensor
Barrel Mount
Used with
QS30
S30
SM30/SMI30
EZ-LIGHT T30
T30
Base Mount
Used with
Q40
Q45
OMNI-BEAM
OTB/LTB
VTB
STB
QT50U
Q45U
Q45UR
QT50R
K50
EZ-LIGHT K50L
SMB30Q
61
69
45
B
A
C
All measurements in mm
Hole center spacing:
A to B = 40.0
Hole size: A = ø 6.3, B = 13.1 x 6.3,
A = ø 30.1
• Right-angle anged mounting
bracket with curved slot for
versatile orentation
• 12-ga. stainless steel
• Mounting hole for 30 mm sensor
Barrel Mount
Used with
QS30
SM30/SMI30
S30
T30
EZ-LIGHT T30
Base Mount
Used with
Q40
Q45
OMNI-BEAM
OTB/LTB
VTB
STB
Q45U
Q45UR
K50
EZ-LIGHT K50L
SMB30SC
66.5
58.7
29 A
All measurements in mm
Hole center spacing: A to B = 50.8
Hole size: A = ø 7.0
• Swivel bracket with 30 mm
mounting hole for sensor
• Black reinforced thermoplastic
polyester
• Stainless steel mounting and
swivel locking hardware included
Barrel Mount
Used with
QS30
SM30/SMI30
S30
T30
EZ-LIGHT T30
Base Mount
Used with
Q40
Q45
OMNI-BEAM
OTB/LTB
VTB
STB
QT50U
Q45U
Q45UR
QT50R
K50
EZ-LIGHT K50L
380 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
SMB30SK
78
68
56.7
A
B
All measurements in mm
Hole center spacing: A = 50.8
Hole size: A = ø 7.0, B = ø 18.0
• Flat-mount swivel bracket with
extended range of motion
• Black reinforced thermoplastic
polyester and 316 stainless steel
• Stainless steel swivel locking
hardware included
Barrel Mount
Used with
QS18
MINI-BEAM
S18/M18/T18
T18U
S18U
QS18U
Q45UR S18C2
Q45UR M18C2
EZ-LIGHT T18
EZ-LIGHT M18
T-GAGE M18T
Base Mount
Used with
Q25
Side Mount
Used with
QM42/QMT42
SMB30SUS
68
56.7
29 A
All measurements in mm
Hole center spacing: A to B = 50.8
Hole size: A = ø 7.0
• Side-mount swivel bracket with
extended range of motion
• Black reinforced thermoplastic
polyester
• Stainless steel swivel locking
hardware included
Side Mount
Used with
QS18
MINI-BEAM
QM42/QMT42
QS18U
SMB30UR
172 71
A
C
D
B
70
All measurements in mm
Hole center spacing: A to B = 31.8,
B to C = 19.0, A to C = 50.8,
D = 50.8
Hole size: A, B, C = 6.9 x 32.0,
D = 73 x 6.9
• 2-piece universal swivel bracket
for limit-switch style sensors
• 300 series stainless steel
• Stainless steel swivel locking
hardware included
Side Mount
Used with
Q45
OMNI-BEAM
Q45U
Q45UR
SMB312B
50.8
23.4
24.1
C
B
A
All measurements in mm
Hole center spacing: A to B = 17.3,
B to C = 17.7, A to C = 35.0
Hole size: A = ø 6.9,
B = 4.3 x 10.5, C = 3.1 x 15.2
• Right-angle
• Stainless steel base mounting
bracket
• Includes mounting foot
Base Mount
Used with
MINI-BEAM
More information online at bannerengineering.com381
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
SMB312PD
41
46
31.8
B
A
C
All measurements in mm
Hole center spacing: A to B = 24.2
Hole size: A = ø 4.6, B = 17.0 x 4.6,
A = ø 18.5
• 18 mm mounting hole for sensor
• Stainless steel barrel-mounting
bracket
NOTE: Not for use with plastic
ber optic sensors
Barrel Mount
Used with
QS18
MINI-BEAM
S18
M18
T18
S18U
T-GAGE M18T
QS18U
Q45UR S18C2
Q45UR M18C2
T18U
EZ-LIGHT T18
EZ-LIGHT M18
Base Mount
Used with
Q25
SMB4050YL
Coming soon!
44
16.4
50
A
All measurements in mm
A = ø 18.0
• Heavy-duty die-cast bracket
for industrial protection
• Replaceable window for use
with some sensor models
• M18 vertical mounting option
* Nut and lock washer included
Base Mount
Used with
QS18 (except AF)
SMB42T
45.5
20.1
31.8
A
B
C
All measurements in mm
Hole center spacing: A = 20.3,
B to C = 5.1
Hole size: A = 4.3 x 7.5,
B = ø 3.0, C = 3.0 x 15.3
• Stainless steel 2-axis
side-mounting bracket
• Nut strap included for replacing
two M3 mounting nuts
Side Mount
Used with
QM42/QMT42
SMB46A
64.5
61
43
A
B
All measurements in mm
Hole center spacing:
A to B = 18.5, B = 30.5
Hole size: A = ø 6.6, B = 7.1 x 20.3
• 2-piece 12-ga. stainless steel
bracket assembly with precision
sensor alignment adjustment
• 2 mm hex key included
Barrel Mount
Used with
QS18 Lasers
S18 Laser Emitter
QS18U
T-GAGE M18T
Side Mount
Used with
PicoDot
382 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
SMB46L
A
65
27
54
All measurements in mm
Hole center spacing: A = 16.0
Hole size: A = 16.5 x 18.7
• Right-angle
• L bracket
• 14-ga. 316 stainless steel
Side Mount
Used with
QS18
MINI-BEAM
QS30
PicoDot
QM42/QMT42
QS18U
SMB46S
A
65
43
54
B
16
All measurements in mm
Hole center spacing: A = 16.0
Hole size: A = 16.5 x 18.7,
B = 34.0 x 10.0
• Right-angle
• S bracket
• 14-ga. 316 stainless steel
Side Mount
Used with
QS18
MINI-BEAM
QS30
PicoDot
QM42/QMT42
QS18U
SMB46U
A
65
70
54
B
All measurements in mm
Hole center spacing: A = 16.0
Hole size: A = 16.5 x 18.7,
B = 34.0 x 13.0
• Right-angle
• U bracket for sensor protection
• 14-ga. 316 stainless steel
Side Mount
Used with
QS18
MINI-BEAM
PicoDot
QM42
QS18U
SMB55A
82.6
50.8
A
B
All measurements in mm
Hole center spacing: A = 24.1,
B = 27.9
Hole size: A = 12.7 x 11.4,
B = 24.8 x 7.6
• 15° offset bracket
• 12-ga. stainless steel
Side Mount
Used with
R58E
QL55
More information online at bannerengineering.com383
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
SMB55F
82.6
50.8
B
A
All measurements in mm
Hole center spacing: A = 24.1,
B = 27.9
Hole size: A = 12.7 x 11.4,
B = 24.8 x 7.6
• Flat-mount bracket
• 12-ga. stainless steel
Side Mount
Used with
R58E
QL55
SMB55RA
50.5
50.8
B
A
31.7
All measurements in mm
Hole center spacing: A = 24.1,
B = 27.9
Hole size: A = 12.7 x 11.4,
B = 24.8 x 7.6
• Right-angle bracket
• 12-ga. stainless steel
Side Mount
Used with
R58E
QL55
SMB55S
59.7
44.5
A
B
All measurements in mm
Hole center spacing: A = 30.5,
B = 28.0
Hole size: A = 12.7 x 11.4,
B = 5.2 x 8.9
• 15° offset bracket
• 12-ga. stainless steel
Side Mount
Used with
R58E
QL55
SMB8MM
24
14
27
A
B
C
All measurements in mm
Hole center spacing: A to B = 14.0
Hole size: A = ø 3.5, B = 8.3 x 3.5,
C = ø 8.4
• Right-angle bracket
• 300 series stainless steel
Barrel Mount
Used with
T8
IT23S (Glass Fiber)
BT23S (Glass Fiber)
EZ-LIGHT T8L
384 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
SMBAMS18P
74
A
45
B
C
All measurements in mm
Hole center spacing: A = 26.0,
A to B = 13.0
Hole size: A = 26.8 x 7.0,
B = ø 6.5, C = ø 19.0
• Flat SMBAMS series bracket with
18 mm hole for mounting sensors
• Articulation slots for 90+° rotation
• 12-ga. 300 series stainless steel
Barrel Mount
Used with
QS18
MINI-BEAM
S18
M18
T18
T-GAGE M18T
S18U
T18U
Q45UR S18C2
Q45UR M18C2
QS18U
EZ-LIGHT T18
EZ-LIGHT M18
SMBAMS18RA
45
48
37
BA
C
All measurements in mm
Hole center spacing: A = 26.0,
A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5,
C = ø 19.0
• Right-angle SMBAMS series
bracket with 18 mm hole for
mounting sensors
• Articulation slots for 90+° rotation
• 12-ga. 300 series stainless steel
Barrel Mount
Used with
QS18
MINI-BEAM
S18
M18
T18
T-GAGE M18T
S18U
T18U
QS18U
Q45UR S18C2
Q45UR M18C2
EZ-LIGHT T18
EZ-LIGHT M18
SMBAMS30P
85
45
A
B
C
All measurements in mm
Hole center spacing: A = 26.0,
A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5,
C = ø 31.0
• Flat SMBAMS series bracket
• 30 mm hole for mounting sensors
• Articulation slots for 90+° rotation
• 12-ga. 300 series stainless steel
Barrel Mount
Used with
QS30
S30
SM30/SMI30
T30
T30U
EZ-LIGHT T30
Base Mount
Used with
Q40
Q45
OMNI-BEAM
OTB/LTB
VTB
STB
QT50R
QT50U
Q45U
Q45UR
K50
EZ-LIGHT K50L
SMBAMS30PL52
145
52
B
A
C
All measurements in mm
Hole center spacing: A = 26.0,
A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5,
C = ø 31.0
• Flat bracket with 70 x 40 mm label
• Flat SMBAMS series bracket
• 30 mm hole for mounting sensors
• Articulation slots for 90+° rotation
• 12-ga. cold rolled stainless steel
Barrel Mount
Used with
EZ-LIGHT T30
Base Mount
Used with
VTB
K50
EZ-LIGHT K50L
More information online at bannerengineering.com385
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
SMBAMS30PL52R
145
104
A
BC
All measurements in mm
Hole center spacing: A = 26.0,
A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5,
C = ø 31.0
• Space for 60 x 58 mm next to
30 mm mounting hole
• Flat SMBAMS series bracket with
30 mm hole for mounting sensors
• Articulation slots for 90+° rotation
• 12-ga. cold rolled stainless steel
Barrel Mount
Used with
EZ-LIGHT T30
Base Mount
Used with
VTB
K50
EZ-LIGHT K50L
SMBAMS30RA
48
45
48 A
B
All measurements in mm
Hole center spacing: A = 26.0,
A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5,
C = ø 31.0
• Right-angle SMBAMS series
bracket
• 30 mm hole for mounting sensors
• Articulation slots for 90+° rotation
• 12-ga. cold rolled stainless steel
Barrel Mount
Used with
QS30
S30
SM30/SMI30
T30
T30U
EZ-LIGHT T30
Base Mount
Used with
Q40
Q45
OMNI-BEAM
OTB/LTB
VTB
STB
Q45U
Q45UR
QT50U
QT50R
K50
EZ-LIGHT K50L
SMBAMS30RLJ
72
85
48
A
B
C
All measurements in mm
Hole center spacing: A = 26.0,
A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5,
C = ø 31.0
• Right-angle bracket with 70 x 40 mm
space for label
• Right-angle SMBAMS series bracket
with 30 mm hole for mounting sensor
• Articulation slots for 90+° rotation
• 12-ga. 300 series stainless steel
Barrel Mount
Used with
EZ-LIGHT T30
Base Mount
Used with
VTB
K50
EZ-LIGHT K50L
SMBAMS30RLS
64
70
48
A
B
C
All measurements in mm
Hole center spacing: A = 26.0,
A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5,
C = ø 31.0
• Right-angle SMBAMS series bracket
with 30 mm hole for mounting sensor
• 62 x 26 mm space for label
• Articulation slots for 90+° rotation
• 12-ga. cold rolled stainless steel
Barrel Mount
Used with
EZ-LIGHT T30L
Base Mount
Used with
VTB
K50
EZ-LIGHT K50L
386 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
SMBAMSBRA
48
45
48
A
B
All measurements in mm
Hole center spacing: A = 26.0,
A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5
• Right-angle base piece for
SMBAMS series of versatile mount-
ing hardware
• Four point hole pattern to integrate
with articulation slots in SMBAMS
series brackets
• 12-ga. 300 series stainless steel
Bracket-to-Bracket
Used with
SMBAMSBRA*
SMBAMS18P
SMBAMS18RA
SMBAMS30P
SMBAMS30PL52
SMBAMS30PL52R
SMBAMS30RLJ
SMBAMS30RLS
SMBAMS30RA
SMBAMSLT3IP
SMBAMSLT3P
SMBAMSQ60IP
SMBAMSQ60P
* Multiple SMBAMSBRA base brackets
can be integrated together to allow for
additional points of articulation
SMBAMSLT3IP
130
A
42.2
B
104
All measurements in mm
Hole center spacing: A = 26.0,
A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5
• Industrial protection SMBAMS
series bracket for LT3 with
replaceable window
• Articulation slots for 90+° rotation
• 12-ga. 300 series stainless steel
Side Mount
Used with
LT3
SMBAMSLT3P
116
87
A
B
All measurements in mm
Hole center spacing: A = 26.0,
B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5
• Flat SMBAMS series bracket for
mounting LT3
• Articulation slots for 90+°rotation
• 12-ga. 300 series stainless steel
Side Mount
Used with
LT3
SMBAMSQ60IP
136
A
42
B
92
All measurements in mm
Hole center spacing: A = 26.0,
B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5
• Industrial protection SMBAMS
series bracket for Q60, with
protection and replaceable window
• Articulation slots for 90+° rotation
• 12-ga. 300 series stainless steel
Side Mount
Used with
Q60
More information online at bannerengineering.com387
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
SMBAMSQ60P
122
A
B
60
All measurements in mm
Hole center spacing: A = 26.0,
B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5
• Flat SMBAMS series bracket for
mounting Q60
• Articulation slots for 90+° rotation
• 12-ga. 300 series stainless steel
Side Mount
Used with
Q60
SMBAMSRAB
119
48
70
A
B
C
D
E
All measurements in mm
Hole center spacing:
A to B = 12.0, B to C = 11.0,
A to C = 23.0, A to D = 55.0,
E to E = 50.8
Hole size: A,B,C,D = 6.9 x 32.0
E = 6.9 x 89.4
• 10-ga. (3.4 mm) cold-rolled
steel with zinc nish
• Retrot WORLD-BEAM QS30 in
place of MULTI-BEAM, MAXI-
BEAM, Q45, OMNI-BEAM and
VALU-BEAM sensors
Base Mount
Used with
QS30*
* Requires a SMBAMS30RA bracket
(sold separately)
SMBDX80DIN
89
89
All measurements in mm
N/A
• Black reinforced thermoplastic
• Bracket for mounting on 35 mm
DIN rail
Side Mount
Used with
K80
EZ-LIGHT K80L
DX80
DX70
DX85
DX81
DX90
DX91
SMBF
21.6 A
15.2
28.6 B
All measurements in mm
Hole center spacing: A = 19.1
Hole size: A = 8.0 x 4.6, A = ø 8.3
• Right-angle bracket for glass
ber optic with 5/16" 24 threaded
tip
• 18-ga. stainless steel
Barrel Mount
Used with
Glass ber with
5/16" - 24 threaded tip
388 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
SMBFP3
10.6 A
12.7
25.4 B
All measurements in mm
Hole center spacing: A = 19.1
Hole size: A = 6.5 x 3.6, B = ø 3.2
• Right-angle bracket for glass
ber optic with 5/16" 24 threaded
tip
• 18-ga. stainless steel
Barrel Mount
Used with
Plastic ber with M3 tip
SMBFP4
10.6 A
12.7
25.4 B
All measurements in mm
Hole center spacing: A = 19.1
Hole size: A = 6.5 x 3.6, B = ø 4.2
• Right-angle bracket for plastic
ber optic with 4 mm threaded
tip
• 18-ga. stainless steel
Barrel Mount
Used with
Plastic ber with M4 tip
SMBFP4N
15.2 A
25.4
8.9
B
All measurements in mm
Hole center spacing: A = 12.0
Hole size: A = 4.8 x 5.0, B = ø 4.2
• Low-prole right-angle bracket
for plastic ber optics with 4 mm
threaded tip
• 18-ga. stainless steel
Barrel Mount
Used with
Plastic ber with M4 tip
SMBFP6
10.6 A
12.7
25.4 B
All measurements in mm
Hole center spacing: A = 19.1
Hole size: A = 6.5 x 3.6, B = ø 6.2
• Low-prole right-angle bracket
for plastic ber optics with 6 mm
threaded tip
• 18-ga. stainless steel
Barrel Mount
Used with
Plastic ber with M6 tip
More information online at bannerengineering.com389
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
SMBLG
72.8
95
27
A
B
C
D
All measurements in mm
Hole center spacing: A = 56.0,
A to B = 20.0, C = 44.5,
C to D = 14.0
Hole size: A = 19.1 x 14.2, B = ø 6.3,
C = 19.3 x 15.3, D = ø 6.3
• LG series sensor mounting bracket
• 304 stainless steel
Side Mount
Used with
LG5
LG10
SMBLGA
72.8
95
40
A
B
C
D
All measurements in mm
Hole center spacing: A = 56.0,
A to B = 20.0, C = 44.5,
C to D = 14.0
Hole size: A = 19.1 x 14.2,
B = ø 6.3, C = 19.3 x 15.3, D = ø 6.3
• LG series adjustable
bracket assembly
• Precision adjustment screws
• 304 stainless steel
Side Mount
Used with
LG5
LG10
SMBLT31
68
85.5
32
BC
A
All measurements in mm
Hole center spacing:
A to C = 47.5, B to B = 24.1
Hole size: A = 13.2 x 5.0,
B = ø 4.0, C = ø 5.0
• Right-angle bracket
• 300 stainless steel
Side Mount
Used with
LT3
SMBLT32
70
90
72
A
All measurements in mm
Hole center spacing: A = 80.0
Hole size: A = 5.0 x 12.0
• Full protection bracket
• 300 stainless steel
• Mounting hardware included
Side Mount
Used with
LT3
390 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
SMBLT3IP
130.5
76.8
107.9
A
All measurements in mm
Hole center spacing: A = 82.5
Hole size: A = 6.0 x 20.5
• Protective bracket with
replaceable window
• Stainless steel construction
• Includes replacement windows
Side Mount
Used with
LT3
SMBLT7
140.5
45
49.5 ABC
All measurements in mm
Hole center spacing:
A to C = 31.8
Hole size: A = ø 3.1, B = 5.0 x 9.0,
C = 5.2 x 28.0
• Right-angle bracket
• 300 stainless steel
• Fine-adjust accessory available
(model SMBLT7F)
Side Mount
Used with
LT7
SMBLT7F
10
All measurements in mm
N/A
• Fine-adjust accessory for
bracket SMBLT7
• Mounting hardware included
• SBMLT7 required (sold separately)
• Cold rolled steel
Bracket-to-Bracket
Used with
LT7*
*Shown mounted on SMBLT7
(sold separately)
SMBLX
12.7
A
39.9
25.5
All measurements in mm
Hole center spacing: A = 12.7
Hole size: A = ø 4.3
• End-cap brackets; set of 2
• Zinc-plated cold rolled steel
Base Mount
Used with
LX
More information online at bannerengineering.com391
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
SMBLXR
51.3
32
76.3
B
A
All measurements in mm
Hole center spacing: A,B = 63.5,
A to B = 10.2
Hole size: A, B = 5.2 x 11.6
• Back-mount bracket for secure
one-end mounting
• Zinc-plated cold rolled steel
Side Mount
Used with
LX
SMBPVA1
22.920.1
40.6
A
B
C
All measurements in mm
Hole center spacing: A = 10.2,
B to B = 18.0, B to C = 10.2
Hole size: A = 10.0 x 4.8,
B, C = ø 4.6
• Right-angle bracket for PVA
and PVD products
• 303 stainless steel
• Replacement brackets included
with sensors
Side Mount
Used with
PVA
PVD
SMBPVA11
56.9
40
All measurements in mm
NA
• Pair of two-piece swivel
brackets for mounting sensor to
5/16" metal rack system
• Articulation slot for ±90° rotation
• May be used with SMBPVA..C
bracket
Side Mount
Used with
PVD
Bracket-to-Bracket
Used with
SMBPVD..A
SMBPVD..AB
SMBPVA2
30
34
66
A
All measurements in mm
Hole center spacing: A = 18.8
Hole size: A = ø 4.4
• Set of 4 molded brackets
• Snaps onto standard 28 mm
diameter pipe
• 2 required per PVA or PVD
sensor
Side Mount
Used with
PVA
PVD
Bracket-to-Bracket
Used with
SMBPVA..
SMBPVA..A
SMBPVA..AB
SMBPVD..A
SMBPVD..AB
392 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
SMBPVA6
58.5
30
32
AB
All measurements in mm
Hole center spacing:
A, B , A to B = 18.0
Hole size: A = ø 3.2
• Set of 4 molded brackets
• Brackets clamp onto 28 mm pipe
• Request data sheet p/n 64900
for more information
Side Mount
Used with
PVA
PVD
Bracket-to-Bracket
Used with
SMBPVA..
SMBPVA..A
SMBPVA..AB
SMBPVD..A
SMBPVD..AB
SMBPVA.., SMBPVA..A, SMBPVA..AB
L
19.3
35.6
All measurements in mm
Models
DIP
Switch
Access
Light
Protected
Length
(L)
Used
With
SMBPVA5 Yes No
139.7 PVA100
SMBPVA5A Yes Yes
SMBPVA5AB No Yes
SMBPVA10 Yes No
268.2 PVA225
SMBPVA10A Yes Yes
SMBPVA10AB No Yes
SMBPVA13 Yes No
343.3 PVA300
SMBPVA13A Yes Yes
SMBPVA13AB No Yes
SMBPVA16 Yes No
418.2 PVA375
SMBPVA16A Yes Yes
SMBPVA16AB NO Yes
• Protects sensor from impact; provides DIP-switch and/or indicator
light exposure (depending on model)
• Heavy-duty cold-rolled steel-zinc nish
• May be used with SMBPVA..C for mounting to SMBPVA7 or
SMBPVA8 brackets
Side Mount
Used with
PVA (see chart)
Bracket-to-Bracket
Used with
SMBPVA..2
SMBPVA..7*
SMBPVA..8*
SMBPVA..C bracket
*Protective bracket must be mounted to a SMBPVA..C bracket.
SMBPVA..C
L1
39
14.5
B C
A
D
EL2
All measurements in mm
Models L1 L2
SMBPVA5C 188.7 139.5
SMBPVA10C 317. 2 268.0
Hole center spacing: A to C = 20.0,
B to C = 18.0, D = 13.0, E = 32.0
Hole size: A = ø 7.3,
B, C, D, E = ø 5.2
• Back-mounted bracket for
mounting to SMBPVA7 or
SMBPVA8 brackets
• Cold-rolled steel with zinc nish
Side Mount
Used with
PVA
PVD
Bracket-to-Bracket
Used with
SMBPVA7*
SMBPVA8*
SMBPVA...
SMBPVA...A
SMBPVA...AB
SMBPVD...A
SMBPVD...AB
*Sensor must be mounted to a
SMBPVA..C bracket.
More information online at bannerengineering.com393
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
SMBPVA7
50
42.5
30
All measurements in mm
N/A
• One-piece bracket for mounting
to 28 mm (11/8") dia. pipe
• Black-painted steel
• Requires SMBPVA..C for
mounting at an angle ±90°
Side Mount
Used with
PVA*
PVD*
SMBPVA5C
SMBPVA10C
*Sensor must be mounted to
SMBPVA..C bracket.
(sold separately)
SMBPVA8
33
40
32
All measurements in mm
N/A
• Heavy-duty 2-part bracket mounts
to 28 mm (11/8") dia. pipe
• Cold-rolled steel with zinc nish
• Requires SMBPVA..C for
mounting
Bracket to Bracket
Used with
PVA*
PVD*
SMBPVA5C
SMBPVA10C
*Sensor must be mounted to
SMBPVA..C bracket.
(sold separately)
SMBPVA9
35
16.8
40
A
All measurements in mm
Hole center spacing: A = 18.0
Hole size: A = ø 5.0
• Pair of 2-piece swivel brackets
• Mount directly to sensor or to
PVD/PVA protective brackets
• Designed for mounting sensor
to “look down”
Side Mount
Used with
PVA
PVD
Bracket to Bracket
Used with
SMBPVA...
SMBPVA..A
SMBPVA...AB
SMBPVD...A
SMBPVD...AB
SMBQ12A
16.5
34.2
10.5
A B
All measurements in mm
Hole center spacing: A to B = 7.6
Hole size: A = 3.5 x 8.1, B = ø 3.2
• Adjustable right-angle bracket
• 20-ga. 300 series stainless steel
Side Mount
Used with
Q12
394 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
SMBPVD..A & SMBPVA..AB
L
19.3
35.6
All measurements in mm
Models
DIP
Switch
Access
Length
(L)
Used
With
SMBPVD100A Yes 140 PVD100
SMBVD100AB No
SMBPVD225A Yes 269 PVD225
SMBPVD225AB No
• Heavy-duty protection brackets; DIP-switch access
• Cold-rolled steel with zinc nish
• May be used with SMBPVA..C for mounting to SMBPVA7 or
SMBPVA8 brackets
Side Mount
Used with
PVD100 (see chart)
Bracket-to-Bracket
Used with
SMBPVA9
SMBPVA2
SMBPVA..C
SMBPVA7*
SMBPVA8*
* Protective bracket must be mounted to a SMBPVA..C bracket.
SMBQ12T
16.5 10.5
34.2
A B
All measurements in mm
Hole center spacing: A to B = 7.6
Hole size: A = 3.5 x 8.1, B = ø 3.2
• Right-angle bracket
• 20-ga. 300 series stainless steel
Side Mount
Used with
Q12
SMBQ20H
55
30
14.5
BA
All measurements in mm
Hole center spacing: A to B = 20.0
Hole size: A = 2.8 x 9.3,
B = 8.4 x 4.5
• Sensor horizontal ange mount
• ± 10° swivel
• Stainless steel
Side Mount
Used with
Q20
More information online at bannerengineering.com395
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
SMBQ20L
39
13.7
A
29
B
All measurements in mm
Hole center spacing: A to B = 20.0
Hole size: A = 2.8 x 9.3,
B = 8.4 x 4.5
• Right-angle bracket
• ± 5° tip, ± 5° swivel
• Stainless steel
Side Mount
Used with
Q20
SMBQ20LV
31.2
16.2
36
A
All measurements in mm
Hole center spacing: A = 12.0
Hole size: A = ø 3.0 x 9.4
• Right-angle bracket
• ±10° tip
• Stainless steel
Side Mount
Used with
Q20
SMBQ20U
38.5
23 34.3
A
All measurements in mm
Hole center spacing: A = 26.5
Hole size: A = 3.0 x 12.6
• Protective bracket
• ±22.5° swivel
• Stainless steel
Side Mount
Used with
Q20
SMBQ50
67
53
20
A
B
All measurements in mm
Hole center spacing: A to B = 24.1
Hole size: A = ø 4.5, B = 8.4 x 4.5
• Right-angle bracket
• 14-ga. 304 stainless steel
Side Mount
Used with
Q50
396 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
SMBQ60
82
64
20
A
B
All measurements in mm
Hole center spacing: A to B = 24.1
Hole size: A = ø 4.5, B = 8.4 x 4.5
• Right-angle bracket
• 14-ga. 304 stainless steel
Side Mount
Used with
Q60
SMBQC50
71
31.2
54.6
A
B
All measurements in mm
Hole center spacing:
A to B = 18.0, B to B = 36.0
Hole size: A = ø 4.0, B = 4.0 x 13.3
• Multi-directional stainless steel
right-angle bracket
• Variety of mounting options
Side Mount
Used with
QC50
QCX50
SMBQS12PD
27
22
27
B
A
C
All measurements in mm
Hole center spacing: A to B = 14.0
Hole size: A = ø 3.5, B = 3.5 x 10.6,
C = ø 13.0
• Right-angle, nose-mount bracket
• 16-ga. 300 series stainless steel
Barrel Mount
Used with
MINI-BEAM2
M12
SMBQS12S
27
16
22
A
All measurements in mm
Hole center spacing: A = 14.0
Hole size: A = 3.5 x 7.0
• Right-angle side-mount bracket
• 16-ga. 300 series stainless steel
Side Mount
Used with
MINI-BEAM2
More information online at bannerengineering.com397
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
SMBQS18AF
44
15.2
B
31.8
A
All measurements in mm
Hole center spacing: A to B = 20.3
Hole size: A = 4.3 x 9.4, B = ø 4.3
• Right-angle mounting bracket
• 14-ga. 304 stainless steel
Side Mount
Used with
QS18AF (Only)
SMBQS18DIN
40
46
11
All measurements in mm
N/A
• Right-angle bracket assembly
for mounting on 35 mm DIN rail
• 300 series stainless steel and
glass lled nylon; zinc-plated
screws
Side Mount
Used with
QS18
SMBQS18RA
40.4
15.2
AB
33
All measurements in mm
Hole center spacing:
A to B = 20.3
Hole size: A = 4.3 x 9.4, B = ø 4.3
• Right-angle mounting bracket
• 14-ga. 304 stainless steel
Side Mount
Used with
QS18 (except QS18AF)
QS18U
SMBQS18A
62
19.4 24.9
A
All measurements in mm
Hole size: A = ø 16.4
• Wrap-around protection bracket
• Die-cast bracket
• Base ts 18 mm threaded hole
• Metal hex nut, lock washer and
grommet included
Side Mount
Used with
QS18
QS18U
398 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
SMBQS18Y
50
19.5
25.4 A
All measurements in mm
Hole size: A = ø 16.4
• Die-cast bracket for 18 mm holes
• Includes metal hex nut and
lock washer
• Allows ± 8° for cabled sensors
Side Mount
Used with
QS18
QS18U
SMBQS18YL
55
16.4
41
A
All measurements in mm
Hole size: A = ø 16.3
• Heavy-duty die-cast bracket
for industrial protection
• Replaceable window
• M18 vertical mount-option
• Nut and lock washer included
Side Mount
Used with
QS18AF
(Class 2 Laser Only)
SMBQS30L
64.4
24
44
A
B
All measurements in mm
Hole center spacing: A to B = 35.0
Hole size: A = ø 4.3, B = 4.25 x 16.3
• Right-angle bracket for cable
sensor models
• Clearance for M4 (#8) hardware
• ± 12° tilt adjustment
• 14-ga. stainless steel
Side Mount
Used with
QS30
SMBQS30LT
91.4
24
44
A
B
All measurements in mm
Hole center spacing: A to B = 35.0
Hole size: A = ø 4.3, B = 4.25 x 16.3
• Tall right-angle bracket for
QD models
• ± 8° tilt adjustment
• 14-ga. stainless steel
Side Mount
Used with
QS30 with integral QDs
More information online at bannerengineering.com399
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
SMBQS30YL
74
27.5
50.5
A
All measurements in mm
Hole size: A = ø 16.4
• Heavy-duty die-cast bracket
designed for industrial protection
• Replaceable window
• M18 vertical mount option
• Includes nuts and lock washer
Side Mount
Used with
QS30 (DC only)
SMBR55F01
65
64
B
A
C
All measurements in mm
Hole center spacing:
A, B, C = 50.8,
A to B, B to C = 25.3
Hole size: A, C = ø 5.6,
B = 11.3 x 5.6
• Flat-mounting bracket
• Eliminates need for DIN rail
• Molded PBT polyester
Side Mount
Used with
R55F
D10
D12
SMBR55FRA
44
40
A
20
All measurements in mm
Hole center spacing: A = 20.0
Hole size: A = ø 5.4
• 19-ga. stainless steel
• Side-mounting bracket
• Eliminates need for DIN rail
Side Mount
Used with
R55F
D10
D12
SMBQS30Y
74
26.5
35
A
All measurements in mm
Hole size: A = ø 16.4
• Heavy-duty die-cast bracket
• M18 vertical mount option
• ± 8° tilt adjustment with cabled
units
• Includes nuts and lock washer
Side Mount
Used with
QS30
400 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
SMBSL
51.9
19
41.3
B
A
C
All measurements in mm
Hole center spacing: A = 40.0,
B, C = 21.6, B to C = 39.9
Hole size: A, B, C = ø 5.5
• Right-angle bracket
• 304 stainless steel
• Hardware included
Side Mount
Used with
SL10
SL30
SMBT18Y
37.4
25.4
19.3
A
All measurements in mm
Hole size: A = ø 15.3
• Die-cast bracket for 18 mm holes
• Includes metal hex nut
• For use with Euro-style QD
connectors and cabled versions
Barrel Mount
Used with
T18
T18U
EZ-LIGHT T18
SMBVS1S
25
12
22
A
All measurements in mm
Hole center spacing: A = 16.8
Hole size: A = 3.5 x 12.3
• Short right-angle bracket
• 18-ga. stainless steel
Side Mount
Used with
VS1
SMBVS1SC
19.5
11
9
A
All measurements in mm
Hole center spacing: A = 10.0
Hole size: A = ø 2.8
• Short right-angle bracket
• 18-ga. stainless steel
Side Mount
Used with
VS1
More information online at bannerengineering.com401
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
BRACKETS – ACCESSORIES
SMBVS1T
32
22
25
A
All measurements in mm
Hole center spacing: A = 16.8
Hole size: A = 3.5 x 12.3
• Tall right-angle bracket
• Stainless steel
Side Mount
Used with
VS1
SMBVS1TC
32
9
10
A
All measurements in mm
Hole center spacing: A = 5.5
Hole size: A = ø 2.8
• Tall right-angle compact bracket
• 300 stainless steel
Side Mount
Used with
VS1
SMBVS2RA
20
20 14
A
All measurements in mm
Hole center spacing: A = 80.
Hole size: A = 3.2 x 6.0
• Right-angle bracket
• Stainless steel
Side Mount
Used with
VS2
SMBVS3S
A23.5
16
16
All measurements in mm
Hole center spacing: A = 13.5
Hole size: A = 3.2 x 7.7
• Right-angle bracket
• 300 stainless steel
Side Mount
Used with
VS3
402 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – BRACKETS
SMBVS3T
32
18
20
A
All measurements in mm
Hole center spacing: A = 13.5
Hole size: A = 3.2 x 7.7
• Tall right-angle bracket
• 300 stainless steel
Side Mount
Used with
VS3
SMBVS4SRA
32.5
10.5
16.5
BA
All measurements in mm
Hole center spacing: A to B = 8.5
Hole size: A = 3.2 x 8.0, B = ø 3.2
• Tall right-angle bracket
• 300 series stainless steel
Side Mount
Used with
VS4
SMH241F
30
6
A
All measurements in mm
Hole center spacing: A = 24.0
Hole size: A = ø 2.5
• Nut strap replaces two M3
mounting nuts and washers
• 16-ga. stainless steel
Side Mount
Used with
QS18
MINI-BEAM
QM42/QMT42
QS18U
ACCESSORIES – BRACKETS
More information online at bannerengineering.com 403
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
VISION BRACKETS – ACCESSORIES
Sensor Used With
PresencePLUS® Pro
page 312
SMBPPDH
page 407
SMBPPDE
page 407
SMBPPLU
page 407
SMBPPRA
page 408
SMBPPU
page 408
SMBPPSU
page 408
PresencePLUS®
P4
page 312
SMBP4RAB
page 406
SMBP4RAS
page 406
Ring Lights
page 324
SMBPPRHI
page 408
Backlights
Page 326
SMBABM
page 404
SMBACM
page 404
Area Lights
page 327
SMBABM
page 404
SMBACM
page 404
SMBASCM
page 404
SMBP42ASM
page 405
SMBP4ASM
page 405
SMBVLAG62X62S
page 409
SMBVLAG62X62RA
page 409
Spot Lights
page 328
SMBP4ASM
page 405
SMBPPLK
page 407
Linear Array
page 329
SMBLASRA
page 404
Tubular Fluorescent
page 329
SMBWFTLS
page 409
SMBWFTLR
page 409
On-Axis Lights
page 330
SMBP40AL100
page 405
SMBP4OAL50
page 405
SMBPPOAL100
page 406
SMBPPOAL50
page 406
Banner Vision Bracket Selection Chart
404 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – VISION BRACKETS
SMBABM
40.6
86.4
A
B
All measurements in mm
Hole center spacing: A = 61.0,
A to B = 30.5
Hole size: A, B = 9.1 x 2.3
• Surface-mount bracket for
mounting light from front
• Black corrosion-resistant zinc
nish
• Hardware included
Used with
Area Lights (80 x 80 mm)
Backlights (70 x 70 mm)
SMBACM
92.4
10.1
110 A
B
All measurements in mm
Hole center spacing: A = 30.0,
A to B = 15.0
Hole size: ø 5.0
• Column-mount bracket with
locking pivot
• Black corrosion-resistant zinc
nish
• Hardware included
Used with
Area Lights (80 x 80 mm)
Backlights (70 x 70 mm)
Note: Shown with optional SMBPPK6
mounting kit (see page 441).
SMBASCM
91
12
89
B
A
All measurements in mm
Hole center spacing: A = 25.4,
A to B = 12.7
Hole size: A = ø 5.0
• Column-mount bracket with
locking pivot
• 316 Stainless steel
• Stainless steel hardware
included
Used with
Area Light (70 mm)
Note: Shown with optional SMBPPK6
mounting kit (see page 441).
SMBLASRA
69
58
65
A
B
All measurements in mm
Hole center spacing:
A , B, A to B = 45.0
Hole size: A = ø 6.6, B = 6.6 x 12.4
• Right-angle metal bracket
• May be used individually or two
used in combination
• 316 stainless steel bracket and
hardware
Used with
Sealed Linear Array
More information online at bannerengineering.com 405
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
VISION BRACKETS – ACCESSORIES
SMBP42ASM
297.4
49.5
All measurements in mm
N/A
• For mounting two lights to P4
sensor housing
• Black corrosion-resistant zinc
nish
• Hardware included
Used with
Area Light (80 x 80 mm)*
Area Light (62 x 62 mm)
Spot Lights
* Requires one SMBACM bracket
with each light (see page 404)
SMBP4ASM
113.4
66
All measurements in mm
N/A
• For mounting light to P4
sensor housing
• Black corrosion-resistant zinc
nish
• Hardware included
Used with
Area Light (80 x 80 mm)*
Area Light (62 x 62 mm)
Spot Lights
* Requires one SMBACM bracket
with each light (see page 404)
SMBP4OAL100
148 115.2*
370
A
All measurements in mm
Hole center spacing: A = 15.0
Hole size: A = ø 5.3
• For mounting On-Axis light to
P4 housing
• Centers lens on light opening
• Black zinc-plated steel
• Hardware included
Used with
On-Axis (100 mm)
* Dimensions include 100 mm light
(sold separately)
SMBP4OAL50
99 65.2*
325
A
All measurements in mm
Hole center spacing: A = 15.0
Hole size: A = ø 5.3
• For mounting On-Axis light to
P4 housing
• Centers lens on light opening
• Black zinc-plated steel
• Hardware included
Used with
On-Axis (50 mm)
* Dimensions include 50 mm light
(sold separately)
406 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
CABLES
RETROREFLECTORS
MISCELLANEOUS ENCLOSURES/
LENS SHIELDS
BRACKETS
ACCESSORIES – VISION BRACKETS
SMBPPOAL100
148 115.2*
370
A
All measurements in mm
Hole center spacing: A = 15.0
Hole size: A = ø 5.3
• For mounting On-Axis light to
Pro housing
• Centers lens on light opening
• Black zinc-plated steel
• Hardware included
Used with
On-Axis 100 mm
* Dimensions include 100 mm light
(sold separately)
SMBPPOAL50
99 65.2*
325
A
All measurements in mm
Hole center spacing: A = 15.0
Hole size: A = ø 5.3
• For mounting On-Axis light to
Pro housing
• Centers lens on light opening
• Black zinc-plated steel
• Hardware included
Used with
On-Axis 50 mm
* Dimensions include 50 mm light
(sold separately)
SMBP4RAB
120.1
80.8
66.9
A
All measurements in mm
Hole center spacing: A = 47.0
Hole size: A = 3.3 x 19.1
• Heavy duty, black corrosion-
resistant zinc nish
• 8° of rotation on image-axis
• Hardware included
Used with
P4 (right-angle)
SMBP4RAS
66.9
4.7
131.7
A
All measurements in mm
Hole center spacing: A = 43.5
Hole size: A = 6.8 x 2.5
• Right-angle swivel bracket
• 70° rotation on image’s x-axis
and 20° on the y-axis
• Black corrosion-resistant zinc
nish
• Hardware included
Used with
P4 (right-angle)
More information online at bannerengineering.com 407
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
VISION BRACKETS – ACCESSORIES
SMBPPDE
104.6
176.4
64.8
All measurements in mm
N/A
• DIN-rail edge mounting bracket to
save linear track space
• Black ABS plastic
• Hardware included
Used with
PresencePLUS Pro Controller
SMBPPDH
104.6
158.8
All measurements in mm
N/A
• DIN-rail at mounting for easy
viewing of LED’s
• Black ABS plastic
• Hardware included
Used with
PresencePLUS Pro Controller
SMBPPLK
58.5
ø 46.0
All measurements in mm
N/A
• 2" pivoting assebmly
Used with
Spot LIghts
SMBPPLU
30.5
65
43.5
AB
All measurements in mm
Hole center spacing: A = 58.5,
B = 30.0
Hole Size: A = 18.7 x 3.4,
B = 14.3 x 4.4
• Highly stable U-Shaped bracket
• Bright corrosion-resistant nish
• Hardware included
Used with
PresencePLUS Pro Camera
408 More information online at bannerengineering.com
SLOT & LABEL PART & AREA
cABLES
RETROREFLEcTORS
MIScELLANEOUS ENcLOSURES/
LENS SHIELDS
BRAckETS
ACCESSORIES – VISION BRAckETS
SMBPPRA
43.5
30
65
B
A
All measurements in mm
Hole center spacing: A = 58.5
Hole Size: A = 18.7 x 3.4,
B = 44.5 x 4.4
• Right-angle bracket with
single-side mounting for
difcult-to-access sites
• Bright corrosion-resistant nish
• Hardware included
Used with
PresencePLUS Pro camera
SMBPPRHI
43.5
57.7
91.5
B
A
All measurements in mm
Hole center spacing: A = 44.5,
B = 52.3
Hole size: A = ø 3.8, B = 3.6 x 6.4
• Black anodized aluminum
bracket
• For mounting light to Pro camera
• Hardware included
Used with
Ring Light (70 mm)
SMBPPU
34
34
48
B
A
All measurements in mm
Hole center spacing: B = 25.0
Hole size: A = ø 16.0,
B = 3.3 x 25.0
• U-Shaped swivel bracket for
variable rotation
• Bright corrosion-resistant nish
• Hardware included
Used with
PresencePLUS Pro camera
SMBPPSU
57.7
77 52.3
C
B
A
All measurements in mm
Hole center spacing:
A to C = 31.8, B = 25.0
Hole size: A = ø 6.5,
B = 20.2 x 7.0, C = ø 6.5
• 316 Stainless Steel
• 10° of rotation on
image’s y-axis
• Hardware included
Used with
Sealed PresencePLUS Pro camera
More information online at bannerengineering.com 409
SLOT & LABEL PART & AREA
CABLES RETROREFLECTORS MISCELLANEOUS
ENCLOSURES/
LENS SHIELDS
BRACKETS
VISION BRACKETS – ACCESSORIES
SMBVLA62X62S
63.5
70.9
6.4
A
All measurements in mm
Hole center spacing: A = 36.4
Hole size: A = 13.1 x 6.6
• Surface-mount bracket for
mounting light from front
• In-line bracket
• 14-ga. steel, black zinc-plated
Used with
Area Lights (62 x 62 mm)
SMBVLA62X62RA
63.5
70.9
25.5
A
All measurements in mm
Hole center spacing: A = 36.4
Hole size: A = 13.1 x 6.6
• For mounting a light at a
right angle
• 14-ga. steel, black zinc-plated
Used with
Area Lights (62 x 62 mm)
SMBWFTLS
150
30
78
A
All measurements in mm
Hole center spacing: A = 27.0
Hole size: A = ø 6.5
• In-line bracket
• Mounts around light
• Bright zinc-coated steel
construction
Used with
Tubular Fluorescent Lights
SMBWFTLR
113
30
78
A
All measurements in mm
Hole center spacing: A = 27.0
Hole size: A = ø 6.5
• Right-angle bracket
• Mounts around light
• Bright zinc-coated steel
construction
Used with
Tubular Fluorescent Lights