1 Pt100 KN 1008 P
The KN Series Ceramic Wire Wound PRTDs are suitable for
general applications requiring temperature stability.
Applications: Industrial resistance thermometers,
especially in chemical, power generation plants and
analytical equipment.
Construction: A platinum coil is sealed inside a high purity
aluminum oxide ceramic body. Lead wires are shear force
resistant and assure proper connection to extension leads
and cables.
1Pt100 KN 1008 P
32.206.971
32.206.972
32.206.973
W0.3
W0.15
W0.1
To be released soon
10
+2
- 0 10.0±0.5
0.8±0.1 0.15±0.01
Temperature stability:
Excellent long-term stability
Tolerance class:
Also available:
Temperature range:
Temperature
coefficient: Tc = 3850 ppm/K
Leads: Platinum-gold alloy
Insulation resistance
after assembly: > 100 MOhm @ 25 °C
W0.3 (Class B) = -196 to +660 °C
W0.15 (Class A) = -196 to +600 °C*
(ST exceeds IEC 60751: -100 to +450 °C)
W0.1 (Class 1/3 B) = -100 to +350 °C
*For a limited time: 250 hours
- According to IEC 60751:2008
- Other standards and narrower
tolerances are available on request
- Different temperature coefficients
(3916 ppm/K - old JIS)
- Extension leads
The measuring point is located at 8 mm from the end of the sensor body
Status 07/2014. Technical modifications reserved.
t
0.5 t
0.9 t
0.9
t
0.5
t
0.5 t
0.9 t
0.9
t
0.5
Types
Water: V= 0.4m/s
Tolerance Order No. L D d l
Response time
Dimensions in mm
Product
Self Heating
Air: V=3m/s
Order No.
1 mA
Nominal resistance:
100 Ohm @ 0 °C
Technical Specification
Measuring current:
Sensor Technology reserves the right to make changes without notice in the specifications of this product
Status: HSTUSA 01/15
1901 Route 130
North Brunswick, NJ 08902
Phone 732-940-4400 Fax 732-940-4445
Email info.hst-us@heraeus.com
www.hst-us.com
Heraeus Sensor Technology USA
