MP3505 THRU MP3510 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 35 Amperes FEATURES * * * * Superior thermal design 400 amperes surge rating 1/4" universal faston terminal Hole thru for # 10 screw 1.142 (29) 1.102 (28) .732 (18.6) .693 (17.6) 1.102 (28) .634 (16.1) 1.142 (29) .673 (17.1) .732 (18.6) .693 (17.6) Hole for # 10 screw Min. F. .200 (5.08) Hole for # 10 screw Min. F. .200 (5.08) 1.142 (29) 1.102 (28) 1.142 (29) 1.102 (28) .673 (17.1) .634 (16.1) .469 (11.9) .429 (10.9) .480 (12.2) .425 (10.8) F. .043 (1.1) F. .039 (1.0) * Epoxy: Device has UL flammability classification 94V-O * UL listed on recognized component directory, file #E94233 MIN. .787 (20.0) MAX. .311(7.9) MECHANICAL DATA MAX. .311(7.9) MP-35 / MP-35W MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .583 (14.8) .543 (13.8) Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. .32 x .252 (0.81 x 6.35) .732 (18.6) .693 (17.6) MP-35 MP-35W Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL MP3505 MP351 MP352 MP354 MP356 MP358 MP3510 UNITS Maximum Recurrent Peak Reverse Voltage RATINGS VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T C = 55 o C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squarad Time RMS isolation voltage from case to lead Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range IO 35 Amps I FSM 400 Amps I2t 663.7 A 2 /Sec VISO 2500 Volts R q JC 1.4 R q JA 19 T J, T STG -55 to + 150 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 17.5A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C @T A = 100 o C SYMBOL MP3505 VF IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. "Fully ROHS compliant", "100% Sn plating (Pb-free)". 3. Suffix "W" for wire type. MP351 MP352 MP354 1.1 MP356 MP358 MP3510 UNITS Volts 5.0 500 uAmps 2011-02 REV:C 30 20 10 5 2 1 0.5 0.2 0 Pulse test per one diode 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( MP3505 THRU MP3510 ) 100 TA = 25 OC 10 1.0 0.1 0 INSTANTANEOUS FORWARD VOLTAGE, (V) 0 400 8.3ms 8.3ms 1 cycle non-repetitive Tj=25 300 200 100 0 0 1 2 5 10 20 50 100 NUMBER OF CYCLE FIG.3 SURGE FORWARD CURRENT CAPABILITY 40 60 80 100 120 140 FIG.2 TYPICAL REVERSE CHARACTERISTICS AVERAGE FORWARD CURRENT, (A) sine wave IFSM PEAK FORWARD SURGE CURRENT, (A) FIG.1 TYPICAL INSTANTANEOUS FORWARD CHARACTERITICS 500 20 PERCENT RATED PEAK REVERSE VOLTAGE, (%) 50 40 30 20 10 0 10 30 50 70 90 110 130 150 HEAT SINK TEMPERATURE, (OC) FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE 170 Marking Description + AC Part No. MP35X Rectron Logo VYWW Year - code: (Y:Last digit of year) Voltage-code 05-------50V 1-------100V 2-------200V 4-------400V 6-------600V 8-------800V 10-----1000V UL Logo Week - code: (WW:01~52) PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE MP-35(W) -B EA PER BOX 50 INNER BOX SIZE CARTON SIZE (mm) (mm) 203*205*57 450*220*255 EA PER CARTON 400 GROSS WEIGHT(Kg) 7.7 (8.26) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.