16
Figure 1
Leads –Leads are solder coated pure nickel wire suitable for soldering or welding.
Tested in accordance with MIL-STD-202, Method 211, .010 diameter leads
withstand a 1-lb. pull and .007 diameter leads an 8 oz. pull. All lead diameters
withstand 5 rotations twist.
MINITAN®Capacitors
TMH Series
The TMH series is now available in three case sizes. These
precision microminiature polarized capacitors are especially
suitable for general filtering, decoupling, bypassing and RC
timing applications. The TMH series is rated to +85°C with-
out derating and up to +125°C with derating. The favorable
capacitance to volume ratio has made this series of MINI-
TAN capacitors the leader in high density applications such
as hearing aids.
CB
A
Ed
Radial Axial
Case Dimensions — millimeters (inches)
Case A B C d E
Size Max Max Max ±.025 (0.001)
X 1.9 (.075) 1.3 (.050) 1.1 (.040) .178 (.007) 0.8±0.4 (.030±.015)
W 2.5 (.100) 1.3 (.050) 1.1 (.040) .178 (.007) 0.8±0.4 (.030±.015)
U 3.2 (.125) 1.8 (.070) 1.1 (.040) .254 (.010) 1.3±0.4 (.050±.015)
Lead length: all case sizes: Pos. 41.3±3.2 (1.625±.125)
Neg. 34.9±3.2 (1.375±.125)
Case Sizes
X, W, U
17
MINITAN®Capacitors
TMH Series
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 0.001µF to 10µF
Capacitance Tolerance: ±20%; ±10%; ±5%
Rated Voltage DC (VR)+85°C: 2 3 4 6 10 15 20
Category Voltage (VC)+125°C: 1.3 2 2.6 4 6.7 10 13
Surge Voltage (VS)+85°C: 2.6 4 5.2 8 13 19 26
+125°C: 1.7 2.6 3.4 5.2 8.7 13 16
Temperature Range: -55°C to +125°C
Dissipation Factor: see part number table
Life Test: After 2000 hrs. at 85°C with VRapplied.
∆CAP = ±15% max.
∆DF, DCL = initial limit.
M
Tolerance
J = ±5%
K = ±10%
M = ±20%
020
Rated DC Voltage
R
Lead
Configuration
R = Radial
A = Axial
B
Packaging
B = Bulk
(100 pcs per bag)
SZ0000
Other Product
Information
SZ = Standard
Product
0000 = Standard
Product
MARKING
Capacitance value shall be typographically marked on all
case sizes.
•Capacitance
•Polarity
•Radial = Red dot on top of unit
•Axial = Red end
• Tolerance code:
±20% = Standard (no marking)
±10% = Silver dot
±5% = Gold dot
TMH
Type
W
Case Code
(See table
on page 16)
472
Capacitance Code
pF code: 1st two digits
represent significant
figures, 3rd digit
represents multiplier
(number of zeros
to follow)
*Note: Other digits may be supplied by factory
to identify specific customer requirements.
Contact factory for details.
HOW TO ORDER
TECHNICAL SPECIFICATIONS
106
106
Polarity
Tolerance
Color Code Dot Tolerance
Color Code Dot
Polarity
18
AVX Capacitance DCL DF
Part No. µF (µA) %
Max. Max.
20 volt @ 85°C (13 volt @ 125°C)
TMH-U-102(*)020ø 0.001 0.5 10
TMH-U-152(*)020ø 0.0015 0.5 10
TMH-X-222(*)020ø 0.0022 0.5 10
TMH-W-222(*)020ø 0.0022 0.5 10
TMH-U-222(*)020ø 0.0022 0.5 10
TMH-X-332(*)020ø 0.0033 0.5 10
TMH-W-332(*)020ø 0.0033 0.5 10
TMH-U-332(*)020ø 0.0033 0.5 10
TMH-X-472(*)020ø 0.0047 0.5 10
TMH-W-472(*)020ø 0.0047 0.5 10
TMH-U-472(*)020ø 0.0047 0.5 10
TMH-X-682(*)020ø 0.0068 0.5 10
TMH-W-682(*)020ø 0.0068 0.5 10
TMH-U-682(*)020ø 0.0068 0.5 10
TMH-X-103(*)020ø 0.010 0.5 10
TMH-W-103(*)020ø 0.010 0.5 10
TMH-U-103(*)020ø 0.010 0.5 10
TMH-U-153(*)020ø 0.015 0.5 10
TMH-X-153(*)020ø 0.015 0.5 10
TMH-X-223(*)020ø 0.022 0.5 10
TMH-W-223(*)020ø 0.022 0.5 10
TMH-U-223(*)020ø 0.022 0.5 10
TMH-X-333(*)020ø 0.033 0.5 10
TMH-W-333(*)020ø 0.033 0.5 10
TMH-U-333(*)020ø 0.033 0.5 10
TMH-X-473(*)020ø 0.047 0.5 10
TMH-W-473(*)020ø 0.047 0.5 10
TMH-U-473(*)020ø 0.047 0.5 10
TMH-X-683(*)020ø 0.068 0.5 10
TMH-W-683(*)020ø 0.068 0.5 10
TMH-U-683(*)020ø 0.068 0.5 10
TMH-U-104(*)020ø 0.1 0.5 10
TMH-U-154(*)020ø 0.15 0.5 10
TMH-U-224(*)020ø 0.22 0.5 10
AVX Capacitance DCL DF
Part No. µF (µA) %
Max. Max.
2 volt @ 85°C (1.3 volt @ 125°C)
TMH-X-474(*)002ø 0.47 0.5 15
TMH-W-474(*)002ø 0.47 0.5 15
TMH-X-684(*)002ø 0.68 0.5 15
TMH-W-684(*)002ø 0.68 0.5 15
TMH-X-105(*)002ø 1.0 0.5 15
TMH-W-105(*)002ø 1.0 0.5 15
TMH-X-155(*)002ø 1.5 0.5 15
TMH-X-225(*)002ø 2.2 0.5 15
TMH-W-225(*)002ø 2.2 0.5 15
TMH-U-225(*)002ø 2.2 0.5 15
TMH-U-335(*)002ø 3.3 0.5 15
TMH-U-475(*)002ø 4.7 0.5 15
TMH-U-685(*)002ø 6.8 0.5 15
TMH-U-106(*)002ø 10.0 0.5 15
3 volt @ 85°C (2 volt @ 125°C)
TMH-U-155(*)003ø 1.5 0.5 10
TMH-U-475(*)003ø 4.7 0.5 10
4 volt @ 85°C (2.6 volt @ 125°C)
TMH-X-334(*)004ø 0.33 0.5 10
TMH-W-334(*)004ø 0.33 0.5 10
TMH-U-105(*)004ø 1.0 0.5 10
6 volt @ 85°C (4 volt @ 125°C)
TMH-X-224(*)006ø 0.22 0.5 10
TMH-W-224(*)006ø 0.22 0.5 10
TMH-U-684(*)006ø 0.68 0.5 10
10 volt @ 85°C (6.7 volt @ 125°C)
TMH-X-154(*)010ø 0.15 0.5 10
TMH-W-154(*)010ø 0.15 0.5 10
TMH-U-474(*)010ø 0.47 0.5 10
15 volt @ 85°C (10 volt @ 125°C)
TMH-X-104(*)015ø 0.1 0.5 10
TMH-W-104(*)015ø 0.1 0.5 10
TMH-U-334(*)015ø 0.33 0.5 10
MINITAN®Capacitors
TMH Series
RATINGS AND PART NUMBER REFERENCE
ø Insert Lead Style: R = Radial, A = Axial
(*)
Insert Capacitance Tolerance: M=±20%; K=±10%; J=±5%
