SPECIFICATION CONTROL DRAWING Product Revision Product Name SO96-1-55-22-95 A Ident Code SO961R SO96-2-55-22-95 A SO962R SO96-3-55-22-95 A SO963R SO96-4-55-22-95 A SO964R SO96-5-55-22-95 A SO965R L1.75 (L0.075) 16.5 (0.650) 16.5 (0.650) 16.5 (0.650) 19.1 (0.750) 19.1 (0.750) Product Dimensions oB oC min min 1.90 2.67 (0.075) (0.105) 2.67 3.68 (0.105) (0.145) 4.32 5.08 (0.170) (0.200) 5.97 6.48 (0.235) (0.255) 6.98 7.62 (0.275) (0.300) Cable Dimensions oE oF oD max min max 2.67 0.90 1.90 (0.105) (0.035) (0.075) 3.68 1.40 2.67 (0.145) (0.055) (0.105) 5.08 2.15 4.32 (0.200) (0.085) (0.170) 6.48 3.30 5.97 (0.255) (0.130) (0.235) 7.62 4.30 6.98 (0.300) (0.170) (0.275) H min 8.20 (0.322) 8.20 (0.322) 8.20 (0.322) 8.20 (0.322) 8.20 (0.322) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn96 per ANSI-J-STD-006. FLUX: TYPE ROM1 per ANSI-J-STD-004. THERMAL INDICATOR: Color change orange to colorless. 3. MELTABLE RINGS: Environment resistant thermoplastic. Color: blue. 4. PRE-INSTALLED LEAD: Raychem 55A0813-22-95 in accordance with MIL-W-22759/41-22-95 AWG22 stranded nickel plated copper. Color: white with green stripe. APPLICATION 1. These parts are designed to an environment resistant shield termination on cables, rated for 150C minimum, meeting the dimensional criteria listed, having nickel-plated shields and insulations compatible with the insert material. See MIL-S-83519/1 or consult Raychem. 2. Temperature range: -55C to +175C. 3. Parts shall be marked with identification code per table. 4. Install using Raychem-approved convection or infra-red heating tools in accordance with Raychem Process Standard RCPS-100-70. Infrared tools are not recommended for use with black jackets. For best results, prepare the wire as shown: * A trademark of Raychem Corporation. THERMOFIT DEVICES TITLE: 300 Constitution Drive Menlo Park, CA 94025, USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A SOLDERSLEEVE* DEVICE SHIELD TERMINATION WITH LEADS, HIGH TEMPERATURE IMMERSION RESISTANT DOCUMENT NO.: SO96-X-55-22-95 DCR NUMBER: REPLACES: D000002 DRAWN BY: DATE: PROD. REV.: DOC ISSUE: M. FORONDA 06-Jan-00 SEE TABLE 0 If this document is printed it becomes uncontrolled. Check for the latest revision SCALE: None N/A SIZE: A SHEET: 1 of 1