SPECIFICATION CONTROL DRAWING
* A trademark of Raychem Corporation.
300 Constitution Drive
Menlo Park, CA 94025, USA
THERMOFIT
DEVICES
TITLE: SOLDERSLEEVE* DEVICE SHIELD
TERMINATION WITH LEADS, HIGH
TEMPERATURE IMMERSION RESISTANT
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO.: SO96-X-55-22-95
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D000002 REPLACES: N/A
DRAWN BY:
M. FORONDA DATE:
06-Jan-00 PROD. REV.:
SEE TABLE DOC ISSUE:
0 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision
Product Revision Product Dimensions Cable Dimensions
Product
Name Ident
Code L±1.75
(L±0.075) øB
min øC
min H
min øE
max øF
min øD
max
SO96-1-55-22-95 A SO961R 16.5
(0.650) 1.90
(0.075) 2.67
(0.105) 8.20
(0.322) 2.67
(0.105) 0.90
(0.035) 1.90
(0.075)
SO96-2-55-22-95 A SO962R 16.5
(0.650) 2.67
(0.105) 3.68
(0.145) 8.20
(0.322) 3.68
(0.145) 1.40
(0.055) 2.67
(0.105)
SO96-3-55-22-95 A SO963R 16.5
(0.650) 4.32
(0.170) 5.08
(0.200) 8.20
(0.322) 5.08
(0.200) 2.15
(0.085) 4.32
(0.170)
SO96-4-55-22-95 A SO964R 19.1
(0.750) 5.97
(0.235) 6.48
(0.255) 8.20
(0.322) 6.48
(0.255) 3.30
(0.130) 5.97
(0.235)
SO96-5-55-22-95 A SO965R 19.1
(0.750) 6.98
(0.275) 7.62
(0.300) 8.20
(0.322) 7.62
(0.300) 4.30
(0.170) 6.98
(0.275)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn96 per ANSI-J-STD-006.
FLUX: TYPE ROM1 per ANSI-J-STD-004.
THERMAL INDICATOR: Color change orange to colorless.
3. MELTABLE RINGS: Environment resistant thermoplastic. Color: blue.
4. PRE-INSTALLED LEAD: Raychem 55A0813-22-95 in accordance with MIL-W-22759/41-22-95 AWG22 stranded nickel
plated copper. Color: white with green stripe.
APPLICATION
1. These parts are designed to an environment resistant shield termination on cables, rated for 150°C minimum, meeting the
dimensional criteria listed, having nickel-plated shields and insulations compatible with the insert material.
See MIL-S-83519/1 or consult Raychem.
2. Temperature range: -55°C to +175°C.
3. Parts shall be marked with identification code per table.
4. Install using Raychem-approved convection or infra-red heating tools in accordance with Raychem Process Standard
RCPS-100-70. Infrared tools are not recommended for use with black jackets.
For best results, prepare
the wire as shown:
