Crystal oscillator Product Number (please contact us) SG-3030CM : X1B000211xxxx00 SG-3030LC : Q3102LC02000100 SG-3030JF : Q3102JF02000100 SG-3030JC : Q3102JC02000100 SG-3040LC : Q3103LC02000100 SG-3040JC : Q3103JC01000100 CRYSTAL OSCILLATOR (SPXO) 32.768 kHz CM,LC, JF,JC Type CM Type SG - 3030CM / LC / JF / JC SG - 3040LC / JC SG-3030CM *Built-in 32.768 kHz crystal unit allows adjustment-free efficient operation. *Use of C-MOS IC enables reduction of current consumption. *VIO controls swing amplitude. SG-3030LC SG-3040LC Actual size LC Type. CM Type. SG-3030JC SG-3040JC SG-3030JF JF Type. JC Type. Specifications (characteristics) Item Specifications SG-3030CM / LC / JF / JC SG-3040LC / JC 32.768 kHz 1.5 V to 5.5 V 0.9 V to 3.6 V 1.5 V to 5.5 V 0.9 V to 3.6 V -55 C to +125 C -40 C to +85 C 5 23 x 10-6 +10 x 10-6 / -120 x 10-6 2 x 10-6 / V Max. 5 x 10-6 / V Max. 2 A Max. 3.1 A Max. 45 % to 55 % VIO-0.4 V Min. 0.4 V Max. 15 pF Max. Symbol Output frequency range Supply voltage Interface power supply voltage Storage temperature Operating temperature Frequency tolerance Frequency temperature coefficient Frequency / voltage coefficient Current consumption Symmetry f0 VCC VIO T_stg T_use f_tol f0-TC f0-VCC ICC SYM VOH VOL L_CMOS Conditions / Remarks Storage as single product +25 C,VCC=3.3 V (SG-3040: VCC=1.2 V) -20 C to +70 C (+25 C is reference) +25 C 3.3 V, No load condition 1/2 VCC(VIO)level (SG-3040: VIO=1.2 V to 3.6 V) IOH=-0.4 mA (SG-3040: VIO=1.2 V to 3.6 V) Output voltage IOL= 0.4 mA (SG-3040: VIO=1.2 V to 3.6 V) Output load condition (CMOS) CMOS load CMOS load:20 % VCC(VIO) to 80 % VCC(VIO)level Rise time / Fall time tr / tf 200 ns Max. 100 ns Max. (SG-3040: VIO=1.2 V to 3.6 V) Time at minimum Supply voltage to be 0 s 1 s Max. 3 s Max. Start-up time t_str +25 C (SG-3030: VCC= 2.0 V to 5.5 V) Frequency aging f_aging 5 x 10-6 / year Max. +25 C, VCC= 3.3 V, First year Unless otherwise stated, characteristics (specifications) shown in the above table are based on the rated operating temperature and voltage condition. Block diagram V Product name (Standard form) V IO V C OR E VCC VO I RD SG-3030 LC OUT 32.768000kHz B CD Model RF 32 .768 kH z Frequency Package type G ND CG -6 Frequency tolerance (B: 523x10 ,+25 C) If V IO function is not used, connect #1 to V C C . External dimension and Footprint (Recommended) Connection 12 11 10 9 8 7 V CC N.C. N.C. N.C. N.C. OUT Pin SG3030 B E 9245A #6 0.5 0.22 0 Min. #2 #1 0.4 5.08 0 Min. 2.8 0.2 ( 0.4 ) Pin map #3 #4 1 2 3 4 #4 Connection V IO GND OUT V CC 10.5 Max. #3 SG3030 B E 8123A (0.75) 0.51 Connection V IO GND OUT V CC #2 #1 (0.75) Pin map Pin 1 2 3 4 5.0 5.8 Max. Pin V IO N.C. N.C. N.C. N.C. GND 2.7 Max. Connection 1 2 3 4 5 6 1.5 Max. Pin 4.6 0.2 A123B 2.4 E 3040 #1 7.1 0.2 Pin map #7 SG-3030JC / 3040JC 5.1 0.2 3.6 0.2 # 12 1.2 Max. *Stop using the glue Any glue must never use it after soldering LC-package to a circuit board.This product has glass on the back side of a package.When glue invasions between circuit board side and glass side, then glass cracks by thermal expansion of glue.In this case a crystal oscillation stops.Consider glue abolition or glue do not touch to LC-package (Unit:mm) SG-3030JF SG-3030LC/3040LC 5.08 (1.0) (1.0) 3.6 0.05Min. The metal case inside of the molding compound may be exposed on the top or bottom of this product. This purely cosmetic and does not have any effect on quality, reliability or electrical specs. #2 0.9 Max. #2 2.1 2.0 4.6 0.27 4.2 0.5 2.4 3.2 1.2 0.4 0.5 1.50.2 0.8 0.8 #4 1.6 2.35 1.3 1.8 1.05 0.65 #1 Pin map Pin Connection 1 VIO 2 GND 3 OUT 4 VCC 2.65 0.8 #3 #3 3030 B123B #1 SG-3030JC / 3040JC SG-3030JF 2.5 3.20.2 #4 SG-3030LC / 3040LC SG-3030CM SG-3030CM 5.08 2.77 5.08 To maintain stable operation, provide a 0.01uF to 0.1uF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product (between Vcc - GND). PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM CONFORMING TO INTERNATIONAL STANDARDS At Seiko Epson, all environmental initiatives operate under the Plan-Do-Check-Action (PDCA) cycle designed to achieve continuous improvements. The environmental management system (EMS) operates under the ISO 14001 environmental management standard. All of our major manufacturing and non-manufacturing sites, in Japan and overseas, completed the acquisition of ISO 14001 certification. ISO 14000 is an international standard for environmental management that was established by the International Standards Organization in 1996 against the background of growing concern regarding global warming, destruction of the ozone layer, and global deforestation. WORKING FOR HIGH QUALITY In order provide high quality and reliable products and services than meet customer needs, Seiko Epson made early efforts towards obtaining ISO9000 series certification and has acquired ISO9001 for all business establishments in Japan and abroad. We have also acquired ISO/TS 16949 certification that is requested strongly by major automotive manufacturers as standard. ISO/TS16949 is the international standard that added the sector-specific supplemental requirements for automotive industry based on ISO9001. Explanation of the mark that are using it for the catalog Pb free. Complies with EU RoHS directive. *About the products without the Pb-free mark. Contains Pb in products exempted by EU RoHS directive. (Contains Pb in sealing glass, high melting temperature type solder or other.) Designed for automotive applications such as Car Multimedia, Body Electronics, Remote Keyless Entry etc. Designed for automotive applications related to driving safety (Engine Control Unit, Air Bag, ESC etc ). Notice This material is subject to change without notice. Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Seiko Epson. The information about applied circuitry, software, usage, etc. written in this material is intended for reference only. Seiko Epson does not assume any liability for the occurrence of infringing on any patent or copyright of a third party. This material does not authorize the licensing for any patent or intellectual copyrights. When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party who may use the products for such prohibited purposes. These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high reliability, such as the applications stated below, you must obtain permission from Seiko Epson in advance. / Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) / Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security equipment / traffic control equipment / and others requiring equivalent reliability. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective. Seiko Epson Corporation