534B1502JLB - VISHAY - Datasheet.Directory

Model 533, 534, 535

www.vishay.com Vishay Spectrol

Revision: 17-Apr-13 1Document Number: 57065

For technical questions, contact: sferprecisionpot@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

7/8" (22.2 mm) Multi Turn Wirewound Potentiometer -

533: 3 Turns/534: 10 Turns/535: 5 Turns

Note

• The color of this product may either be black (US market) or blue

(other regions)

FEATURES

• Bushing and servo mount designs available

• Special resistance tolerances to 1 %

• Rear shaft extensions and support bearing

• Metric shaft available

• Dual gang configuration and concentric shafts

• High torque, center tap, slipping clutch on request

• Special markings and front shaft extensions

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

QUICK REFERENCE DATA

Sensor type ROTATIONAL, multi turn wirewound

Output type Output by turrets

Market appliance Industrial

Dimensions 7/8" (22.2 mm)

ELECTRICAL SPECIFICATIONS

PARAMETER MODEL 533 MODEL 534 MODEL 535

Resistance range - standard values 50  to 20 k100  to 100 k50  to 50 k

Capability range 5  to 60 k10  to 200 k5  to 100 k

Standard tolerance ± 5 % ± 5 % ± 5 %

Linearity (independent) ± 0.25 % ± 0.25 % ± 0.25 %

Noise 100  ENR 100  ENR 100  ENR

Rotation (electrical and mechanical) 1080° + 10°

- 0°

3600° + 10°

- 0°

1800° + 10°

- 0°

Power rating (at 70 °C) 1.0 W 2.0 w 1.5 W

Insulation resistance 1000 M minimum 500 VDC

Dielectric strength 1000 VRMS minimum 60 Hz

Absolute minimum resistance Not to exceed linearity x total resistance or 1 , whichever is greater

Temperature coefficient 20 ppm/°C (standard values, wire only)

End voltage 0.25 % of total applied voltage, maximum

Phasing CCW end points - section 2 phased to section 1 within ± 2°

Taps Center tap only

MARKING

Unit identification

Manufacturer’s name and model number,

resistance value and tolerance, linearity

specification date code and terminal

identification.

Example of a marking for a standard part:

534-11103

RESISTANCE VALUES

533 ( 50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K

534 ( 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K

535 ( 50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K

ORDERING INFORMATION/DESCRIPTION

The Models 533 (3 turns), 534 (10 turns) and 535 (5 turns) can be ordered by stating

534 B 2 10K 20K 5 % C BO10 e4

MODEL MOUNTING

NUMBER OF

SECTION

OHMIC VALUE

SECTION No 1

OHMIC VALUE

SECTION No 2

TOLERANCE ON

OHMIC VALUE LINEARITY PACKAGING

LEAD

FINISH

B: Bushing

S: Servo

± 0.25 % (STD) Box of

10 pieces

SAP PART NUMBERING GUIDELINES

534 B 2 103 203 J C B

MODEL STYLE NUMBER OF

SECTION

OHMIC VALUE

SECTION No 1

OHMIC VALUE

SECTION No 2

TOLERANCE ON

OHMIC VALUE LINEARITY PACKAGING

B: Bushing

S: Servo

103 = 10K 203 = 20K J: ± 5 %

F: ± 1 %

C: ± 0.25 %

CUSTOM:

L: ± 0.20 %

D: ± 0.1 %

Box of

10 pieces

Model 533, 534, 535

www.vishay.com Vishay Spectrol

Revision: 17-Apr-13 2Document Number: 57065

For technical questions, contact: sferprecisionpot@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Mounting hardware, washer and panel nut, nickel plated

POWER RATING CHART

SINGLE SECTION DIMENSIONS in inches (millimeters)

MECHANICAL SPECIFICATIONS

PARAMETER

Bearing type Bushing: Sleeve bearing Servo: Ball bearing

Torque (maximums): starting

Section 1

Section 2

534

0.5 oz. - in (36 g - cm)

0.9 oz. - in (65 g - cm)

533/535

0.7 oz. - in (50 g - cm)

1.1 oz. - in (79 g - cm)

Torque (maximums): running

Section 1

Section 2

534

0.4 oz. - in (28.80 g - cm)

0.7 oz. - in (50.40 g - cm)

533/535

0.6 oz. - in (43.20 g - cm)

0.9 oz. - in (64.8 g - cm)

Weight (maximums)

Section1

Section 2

0.75 oz. (21.26 g)

1.25 oz. (35.44 g)

Stop strength 75 oz. - in (static) (5.4 kg - cm)

Ganging 2 sections maximum

SCHEMATIC

0.750 (19.05)

± 0.015

0.312 (7.92)

± 0.015

0.062 (1.57)

0.200 MIN. (5.08)

Ø 0.875

(22.22)

± 0.015

0.030 MAX. (0.76)

0.812 (20.62)

± 0.031

Ø 0.2497 (6.34)+ 0.0000

- 0.0003

0.032 x 0.032

(0.81) x (0.81) DP

± 0.010

3/8 - 32UNEF - 2A

Ø 0.4062

(10.32)

+ 0.0000

- 0.0020

9 mm x 0.75 P

Ø 6.00 mm

SCREWDRIVER SLOT

+ 0.000

- 0.0003

0.850 (21.59)

± 0.015 0.375 (9.52)

± 0.031

0.062 (1.57)

Ø 0.7500 (19.05)+ 0.0000

- 0.0005

Ø 0.875 (22.22)

Ø 0.1248 (3.17) + 0.0000

- 0.0003

0.057 (1.45) MIN.

0.300 (7.62) MIN.

Ø 0.750 (19.05) MAX.

Ø 0.875

(22.22)

± 0.015

0.062 (1.57)

30°

TYP.

R 0.625 MAX.

(15.88)

BUSHING

MOUNT MODEL:

534B/534-1

SERVO

MOUNT MODEL:

534S/534-2

METRIC SHAFT: 534B...8872

RATED POWER IN W

0 20 40 60 80 100 120 140 160

534

535

533

AMBIENT TEMPERATURE IN °C

ENVIRONMENTAL SPECIFICATIONS

Vibration 15 g thru 2000 Hz

Shock 50 g

Rotational life (shaft revolution)

533

534

534 (servo)

535

300 000

1 000 000

> 1 000 000

500 000

Load life 900 h

Temperature range - 55 °C to + 125 °C

Model 533, 534, 535

www.vishay.com Vishay Spectrol

Revision: 17-Apr-13 3Document Number: 57065

For technical questions, contact: sferprecisionpot@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RESISTANCE ELEMENT DATA

RESISTANCE VALUE

()

RESOLUTION

(%) OHMS PER TURN

MAXIMUM CURRENT

AT 70 °C AMBIENT

(mA)

MAXIMUM VOLTAGE

ACROSS COIL

(V)

533 534 535 533 534 535 533 534 535 533 534 535 533 534 535

50 - 50 0.149 - 0.120 0.0746 - 0.0603 141.0 - 173.0 7.07 - 8.66

100 100 100 0.111 0.060 0.075 0.1114 0.0603 0.0746 100.0 141.0 122.0 10.0 14.1 12.2

200 200 200 0.097 0.037 0.061 0.1954 0.0746 0.1220 70.7 100.0 86.6 14.1 20.0 17.3

500 500 500 0.069 0.031 0.049 0.3424 0.1520 0.2459 44.7 63.2 54.7 22.4 31.6 27.4

1K 1K 1K 0.063 0.025 0.041 0.6331 0.2459 0.4113 31.6 44.7 38.7 31.6 44.7 38.7

2K 2K 2K 0.041 0.021 0.031 0.8206 0.4113 0.6331 22.4 31.6 27.4 44.7 63.2 54.8

5K 5K 5K 0.044 0.016 0.034 2.2330 0.8206 1.7230 14.1 20.0 17.3 70.7 100.0 86.6

10K 10K 10K 0.034 0.017 0.030 3.4510 1.7230 3.0160 10.0 14.1 12.2 100.0 141.0 122.0

20K 20K 20K 0.031 0.015 0.020 6.1790 3.0160 3.9910 7.07 10.0 8.66 141.0 200.0 173.0

- 50K 50K - 0.009 0.015 - 4.6690 7.4560 - 6.32 5.47 - 316.0 274.0

- 100K - - 0.007 - - 7.4560 - - 4.47 - - 447.0 -

---------------

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 02-Oct-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.