3.9.3 Analog to Digital Converter (ADC)

The ADC is a Successive Approximation Register (SAR) architecture, with a resolution of up to 12 bits at up to 1 MSamples/s. The

range of sources, including pins configurable as either single-ended or differential.

3.9.4 Digital to Analog Current Converter (IDAC)

The Digital to Analog Current Converter can source or sink a configurable constant current. This current can be driven on an output pin

3.10 Reset Management Unit (RMU)

The RMU is responsible for handling reset of the EFR32BG1. A wide range of reset sources are available, including several power

supply monitors, pin reset, software controlled reset, core lockup reset and watchdog reset.

3.11 Core and Memory

3.11.1 Processor Core

The ARM Cortex-M processor includes a 32-bit RISC processor integrating the following features and tasks in the system:

• ARM Cortex-M4 RISC processor achieving 1.25 Dhrystone MIPS/MHz

The Memory System Controller (MSC) is the program memory unit of the microcontroller. The flash memory is readable and writable

from both the Cortex-M and DMA. The flash memory is divided into two blocks; the main block and the information block. Program code

is normally written to the main block, whereas the information block is available for special user data and flash lock bits. There is also a

read-only page in the information block containing system and device calibration data. Read and write operations are supported in en-

ergy modes EM0 Active and EM1 Sleep.

3.11.3 Linked Direct Memory Access Controller (LDMA)

The Linked Direct Memory Access (LDMA) controller features 8 channels capable of performing memory operations independently of

software. This reduces both energy consumption and software workload. The LDMA allows operations to be linked together and stag-

ed, enabling sophisticated operations to be implemented.