CO packano T-134 (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Technical Data Features Integral Current Limiting Resistor TTL Compatible Requires no External Current Limiter with 5 Volt/12 Volt Supply * Cost Effective Saves Space and Resistor Cost * Wide Viewing Angle Available in All Colors Red, High Efficiency Red, Yellow, and High Performance Green in T-1 and T-13/4 Packages Package Dimensions 2.16 { 125) ~ Fay C1) | [Pe aeum i ates 1061 sua _- lel t 102 1.0401 OM. 3412 10.06) IN Le 0,85 1.018) SQUARE NOMINAL CATHOOE 1.27 (060) WOM. ' +| 2.56 (0.100) BOMINAL Figure A. T-1 Package. 5964-9296E Description The 5 volt and 12 volt series lamps contain an integral current limiting resistor in series with the LED. This allows the lamp to be driven from a 5 volt/12 volt source without an external current limiter. The red LEDs are made from GaAsP on a GaAs substrate. The High Efficiency Red and Yellow devices use GaAsP on a GaP substrate. The green devices use GaP on a GaP substrate. The diffused lamps provide a wide off-axis viewing angle. Oy Figure B. T-15/4 Package. HLMP-1600, HLMP-1601 HLMP-1620, HLMP-1621 HLMP-1640, HLMP-1641 HLMP-3600, HLMP-3601 HLMP-3650, HLMP-3651 HLMP-3680, HLMP-3681 Qa < n a ee ra faa} [eal am The T-1%/s lamps are provided with sturdy leads suitable for wire wrap applications. The T-1%/s lamps may be front panel mounted by using the HLMP-0103 clip and ring. NOTES: 1, ALL DIMENSIONS ARE iN MILLIMETRES (INCHES}. 2. AN EPOXY MENISCUS MAY EXTEND ABOUT Imm (.040"} DOWN THE LEADS: 1-113 O'CATORS Selection Guide Part I, med Number Operating Package Color HLMP- Package Voltage . | Typ. | 264/211 | Outline High 1600 T-1 Tinted Diffused 5 2.1 8.0 60 A Efficiency 1601 12 Red 3600 T-1/4 Tinted Diffused 5 60 B 3601 12 Yellow 1620 T-1 Tinted Diffused 5 2.2 8.0 60 A 1621 12 3650 T-15/s Tinted Diffused 5 60 B 3651 12 High 1640 T-1 Tinted Diffused 5 1.6 8.0 60 A Performance 1641 12 Green 3680 T-1/s Tinted Diffused 5 60 B 3681 12 Note: 1. 8, is the off-axis angle at which the luminous intensity is 1/2 the axial luminous intensity. Absolute Maximum Ratings at T, = 25C Red/HER/ Red/HER/ Yellow Yellow Green Green 5 Volt Lamps 12 Volt Lamps 5 Volt Lamps 12 Volt Lamps DC Forward Voltage (Ty, = 25C) 7.5 Volts!?! 15 Voltsl31 7.5 Voltsl?! 15 Voltsl3] Reverse Voltage (Ip = 100 pA) 5 Volts 5 Volts 5 Volts 5 Volts Operating Temperature Range -40C to 85C -40C to 85C -20C to 85C -20C to 85C Storage Temperature Range -55C to 100C -55C to 100C -65C to 100C | -55C to 100C Lead Soldering Temperature 260C for 5 seconds Notes: 2. Derate from T, = 50C at 0.071 W/C, see Figure 3. 3. Derate from T, = 50C at 0.086 V/C, see Figure 4. 1-114 Electrical/Optical Characteristics at Ty = 25C High Efficiency Red Yellow Green Test Symbol | Description Min. Typ. Max. Min. | Typ. Max, Min. Typ. | Max. | Unit Condition Ap Peak 635 583 565 nm Wavelength ha Dominant 626 585 569 nm_ | Note 4 Wavelength AAl2 Spectral Line 40 36 28 nm Halfwidth R@,pw | Thermal 290 290 290 C/W | Junction to Resistance Cathode Lead (Note 6) R@;pm | Thermal 210 210 210 C/W | Junction to Resistance Cathode Lead (Note 7) Ip Forward 13 20 13 20 13 20 mA | V>=12V Current 12 V Devices Ip Forward 10 15 10 15 10 15 mA | VP=5V Current 5 V Devices tw Luminous 145 500 595 lumen | Note 2 Efficacy {Watt VR Reverse 5.0 5.0 5.0 Vv Ip = 100 pA Breakdown Voltage Notes: 4. The dominant wavelength, Ay, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 5. Radiant intensity, I, in watts/steradian, may be found from the equation I, = hy/y, where ly is the luminous intensity in candelas and Ny is the luminous efficacy in lumens/Watt. 6. For Figure A package type. 7. For Figure B package type. 1-115 18 12 Ie FORWARD CURRENT - mA Lif Lil Et a 2 4 6 |8 10 12 16 | 16 75 16 Voc APPLIED FORWARD VOLTAGE - V Figure 1. Forward Current vs. Applied Forward Voltage. 5 Volt Devices. Vec APPLIED FORWARD VOLTAGE V o 2 a 60 80 85 Ta AMBIENT TEMPERATURE C Figure 3. Maximum Allowed Applied Forward Voltage vs. Ambient Temperature R0,;, = 175C/W. 5 Volt Devices. Figure 4. Relative Luminous Intensity vs. Angular Displacement for T-1 Package. 1-116 10 20 30 40 50 80 70 80 90 100 24 < 2 ' 5 / Zz 6 re 5 S oS 2 2 ec q E a8 2 I L +, 7 I | l o 2 4 6 |8 0 12 14 | 16 7.6 16 Vec APPLIED FORWARD VOLTAGE - v Figure 2. Forward Current vs. Applied Forward Voltage. 12 Volt Devices. Vec ~ APPLIED FORWARD VOLTAGE - V a 20 an oo 80 85 Ta AMBIENT TEMPERATURE C Figure 4. Maximum Allowed Applied Forward Voltage vs. Ambient Temperature RO;, = 175C/W. 12 Volt Devices. Figure 5. Relative Luminous Intensity vs. Angular Displacement for T-19/4 Package. 25 15 / 2.0 / / / 10 2 415 7 2 z S e - a 10 3 Os GaAsP GaAwP os N HIGH EFFICIENCY J HIGH EFFICIENCY p> FED, YELLOW, ~RED, YELLOW, GREEN GREEN 0 1 rt, 4 0 2 4 8 8 10 0 2 4 6 8 00 12 14 16 18 20 5 VOLT DEVICE 12 VOLT DEVICES Figure 6. Relative Luminous Intensity vs. Applied Forward Figure 7. Relative Luminous Intensity vs. Applied Forward Voltage. 5 Volt Devices, Voltage. 12 Volt Devices. 1-117