F-213-1 MPTC-01-80-01-01-01-L-RA-SD TM 25 STRIP MPSC-01-24-01-01-01-L-RA-SD (2,00 mm) .0787" MPTC-RA, MPSC-RA SERIES 25A RIGHT ANGLE SIGNAL/POWER COMBO MPTC-RA Mates with: MPSC, MPCC MPSC-RA Mates with: MPTC MPTC PWR PINS SIG PINS PWR PINS 01 TAIL LENGTH SPECIFICATIONS For complete specifications see www.samtec.com?MPTC or www.samtec.com?MPSC Insulator Material: Black LCP Terminal/Contact Material: Signal: Phosphor Bronze Power: Copper Alloy Plating: Sn or Au over 50" (1,27 m) Ni Current Rating: See MPT/MPS Series Operating Temp Range: -55C to +105C Voltage Rating: Power: 600 VAC/848 VDC Signal: 450 VAC/636 VDC RoHS Compliant: Yes Lead-Free Solderable: Yes APPLICATION SPECIFIC OPTION * Asymmetric power pin placement. * Solder leads for (2,36 mm) .093" board. Call Samtec. -01, -02 -24 -01, -02 = Power Pins Per End = Total Signal Pins = Power Pins Per End = Total Signal Pins (15,70) .618 (12,27) .483 (12,45) .490 (2,00) .0787 01 (0,50) .020 = 10" (0,25 m) Gold on contact, Matte Tin on tail (Power & Signal) -T (35,25) 1.388 (63,25) 2.490 (45,25) 1.781 (73,25) 2.884 -LC = Locking Clip (Manual placement required) (2,72) .107 (1,88) .074 (2,00) .0787 -SD = Screw Down = Matte Tin on contacts and tail (Power), Gold on contact, Matte Tin on tail (Signal) -01 -02 OTHER OPTION -SD or -LC is a required callout A POWER PINS/END 24 SIGNAL PINS 80 SIGNAL PINS (8,18) .322 04 RA -L (3,56) .140 DIA A * Screw down option (3,25) .128 * Locking clip option MPSC PWR PINS -01, -02 = Power Pins Per End SIG PINS -24 = Total Signal Pins -80 = Total Signal Pins PWR PINS 01 TAIL LENGTH PLATING OPTION -01 -01, -02 = 10" (0,25 m) Gold on contact, Matte Tin on tail (Power & Signal) Note: Available standard power pin combinations: MPSC-01-XX-01 or MPSC-02-XX-02. Contact Samtec for other options. -T = Matte Tin on contacts and tail (Power), Gold on contact, Matte Tin on tail (Signal) (3,56) .140 DIA (15,06) .593 RA -L = Use with (1,60 mm) .062" Thick PCB = Power Pins Per End A (11,43) (2,50) .450 .098 (4,44) .175 (2,72) .107 (2,00) .0787 (1,88) .074 (0,50) .020 SQ (2,00) .0787 01 OTHER OPTION -SD or -LC is a required callout -SD = Screw Down -LC = Locking Clip (Manual placement required) A POWER PINS/END 24 SIGNAL PINS 80 SIGNAL PINS 04 (10,16) .400 Note: Some sizes, styles and options are non-standard, non-returnable. -01 = Use with (1,60 mm) .062" Thick PCB Note: Available standard power pin combinations: MPTC-01-XX-01 or MPTC-02-XX-02. Contact Samtec for other options. -80 (0,40) .016 PLATING OPTION (0,41) .016 WWW.SAMTEC.COM (2,54) .100 -01 -02 (36,52) 1.438 (64,52) 2.540 (46,52) 1.831 (74,52) 2.934