Q SERIES O14mm (.551") Panel Mount LED Indicators Distinctive features and specification Q14_VOY1609R2US Features * 14mm panel mounting LED indicator * 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs * Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body * Prominent recessed and flush bezel styles * Custom engraving available * 2VDC - 220VAC * (2.8 x 0.8) solder lug/Faston terminals, pins or (200mm long) wire terminations * IP67 sealing option (EN60529) * Supplied with fixing nut and spring washer NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VDC 28VDC 110VAC 220VAC Operating Voltage (Min to Max) 1.8 to 3.3VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC 99 to 121VAC 207 to 253VAC Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA 6mA 3mA Max Reverse Voltage: 5V Viewing Angle: 30-100 (dependant on model) Life Expectancy: 100,000 hours Temperature Range: -40 to +85C (operating & storage) Torque: 75cNm O 14.00 +0.15/-0.0 PANEL CUTOUT 17,00 0,669 AF 3,00 0,118 M14 x 1,0 THREAD Standard LED Intensity Prominent and Recessed Flush Forward Voltage HE Red 80mcd 10mcd 2.0V Green 60mcd 5mcd 2.2V Yellow 50mcd 4mcd 2.1V Blue 540mcd 100mcd 3.3V White 1000mcd 150mcd 3.3V Orange 80mcd 200mcd 2.0V Bi-color (Typical) (Red/Green) 15/15mcd 14/10mcd 2.0V/2.2V Tri-color (Typical) (Red/Green/Yellow) 60/50/50mcd 15/10/30mcd 2.0V/2.2V/2.1V Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. Super Bright LED HE Red Green Yellow Blue White Orange Prominent and Recessed 17,000mcd 11,000mcd 4,000mcd 2,500mcd 4,400mcd 2800mcd Flush 2,000mcd 680mcd 350mcd 250mcd 250mcd 300mcd Forward Voltage 2.2V 3.5V 2.3V 3.3V 3.3V 2.1V Hyper Bright LED HE Red Green Yellow Orange Prominent and Recessed 2,800mcd 2,200mcd 1,300mcd 850mcd Flush 800mcd 250mcd 250mcd 200mcd Forward Voltage 2.1V 3.2V 2.0V 2.1V Luminous intensity will be reduced with lower operating current. Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy. The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current. Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal. APEM www.apem.com 1 Q SERIES O14mm (.551") Panel Mount LED Indicators Technical Drawings PINS 4,75 0,187 13,50 0,531 10,00 0,394 9,35 0,368 33,75 1,329 4,75 0,187 13,50 0,531 7,00 0,276 5,50 0,217 28,75 1,132 REAR EPOXY PINS 16,00 0,630 16,00 0,630 WIRES 200,0+/-10 [7,874+/-0,393] FLUSH BEZEL 4,75 0,187 13,50 0,531 19,75 0,778 PINS 1,50 0,059 13,50[0,531] 20,10 0,791 M14x1,0 200,0+/-10 [7,874+/-0,393] 29,10 1,146 1,50 0,059 13,50[0,531] 17,85 0,703 16,00 ,630 14,50 0,571 www.apem.com 0,50 0,020 1,25 0,049 1,25 0,049 7,00 0,276 5,50 0,217 29,10 1,146 REAR EPOXY PINS M14x1,0 0,50 0,020 1,25 0,049 1,25 0,049 16,00 0,630 M14x1,0 1,50 0,059 13,50[0,531] WIRES 18,25 0,719 16,75 0,659 16,00 0,630 SHORT BODY WIRES 0,50 0,020 1,25 0,049 1,25 0,049 200,0+/-10 [7,874+/-0,393] 10,00 0,394 9,35 0,368 16,00 0,630 M14x1,0 34,10 1,343 16,00 0,630 16,00 0,630 2,8x0,8[0,11x0,031] M14x1,0 SHORT BODY PINS 16,00 0,630 REAR EPOXY WIRES 16,00 0,630 1,50 0,059 13,50[0,531] 2 200,0+/-10 [7,874+/-0,393] 4,75 0,187 13,50 0,531 19,75 0,778 16,00 0,630 14,50 0,571 SOLDER LUG/FASTONS 1,50 0,059 13,5[0,531] 1,50 0,059 13,50[0,531] 17,85 0,703 SHORT BODY WIRES M14x1,0 0,50 0,020 1,25 0,049 1,25 0,049 16,00 0,630 M14x1,0 16,00 0,630 4,75 0,187 13,50 0,532 17,50 0,689 SHORT BODY PINS 16,00 0,630 28,75 1,132 REAR EPOXY WIRES 18,25 0,719 16,75 0,659 4,75 0,187 13,50 0,531 17,50 0,689 200,0+/-10 [7,874+/-0,393] 4,75 0,187 13,50 0,531 M14x1,0 M14x1,0 M14x1,0 0,50 0,020 1,25 0,049 1,25 0,049 M14x1,0 0,50 0,020 1,25 0,049 1,25 0,049 2,8x0,8[0,11x0,031] M14x1,0 16,00 0,630 16,00 0,630 SOLDER LUG/FASTONS PROMINENT BEZEL 1,50 0,059 13,50[0,531] 20,10 0,791 M14x1,0 200,0+/-10 [7,874+/-0,393] APEM Q SERIES O14mm (.551") Panel Mount LED Indicators 10,00 0,394 9,35 0,368 33,75 1,329 16,00 0,630 14,50 0,571 www.apem.com 5,00 0,197 13,50 0,531 17,50 0,689 16,00 0,630 SQ 5,00 0,197 13,50 0,531 19,75 0,778 M14x1,0 SHORT BODY PINS 0,50 0,020 2,50 0,098 1,25 0,049 200,00+/-10 [7,874+/-0,393] M14x1,0 EPOXY PINS 18,25 0,719 16,75 0,659 SHORT BODY WIRES M14x1,0 200,00+/-10 [7,874+/-0,393 7,00 0,276 5,50 0,217 SQ 16,00 0,630 16,00 0,630 APEM 16,00 0,630 16,00 0,630 5,00 0,197 13,50 0,531 17,50 0,689 28,75 1,132 WIRES M14x1,0 5,00 0,197 13,50 0,531 28,75 1,132 REAR EPOXY WIRES 5,00 0,197 13,50 0,531 0,50 0,020 2,50 0,098 1,25 0,049 13,50 0,531 M14x1,0 M14x1,0 5,00 0,197 PINS 0,50 0,020 2,50 0,098 1,25 0,049 M14x1,0 16,00 0,630 16,00 0,630 SOLDER LUG/FASTONS 2,8x0,8[0,11x0,031] RECESSED BEZEL SQ Technical Drawings 5,00 0,197 13,50 0,531 19,75 0,778 200,00+/-10 [7,874+/-0,393] 3 Q SERIES O14mm (.551") Panel Mount LED Indicators Custom options CUSTOM MARKING Cable length & connector For custom cable length and connectors please contact APEM CUSTOM ENGRAVING Suffix the part number with legend code. Code Symbol Description Code Symbol Description Code Symbol Description -0AJ High Beam -041 Horn -0EL Engine Coil -097 Low Beam -013 Hazard Warning -0SB Seat Belt -027 Rear Fog -018 Heating -0UB USB Connection -026 Front Fog -0BU Brake Test -0ST Steam -021 Windscreen Wiper -0K6 Arrow -0EU -022 Windscreen Washer -0AG Battery -0AD Side Step -023 Ventilator Fan -0GP Oil Can -012 Air Con -0AH Turn Signal -020 Windscreen Heating -040 Engine -098 Side Lights -086 ABS -0BR Boot/Trunk Release ECU Some common codes are listed above, for your custom requirements please contact APEM. Unless specified, standard engraving with white infill will be supplied. 4 www.apem.com APEM Q SERIES O14mm (.551") Panel Mount LED Indicators Order Overview STANDARD OPTIONS The Q14 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below. Q 14 P 1 C XX B 28 E SERIES MOUNTING HOLE BEZEL STYLE TERMINALS BEZEL FINISH TYPE OF ILLUMINATION LED COLOR VOLTAGE SEALING 1 = Solder Lug/ Fastons (2.8 x 0.8) C = Bright Chrome XX = Fixed Light R = Red 02 = no resistor* (Blank) = Unsealed R = Recessed B = Black Chrome G = Green 06 = 6VDC E = IP67 F = Flush 2 = Pins G = Satin Grey KK = Flashing Light (12- 28VDC) Y = Yellow 12 = 12VDC B = Blue 12A = 12VAC/DC W = White 24 = 24VDC O = Orange 24A = 24VAC/DC Q 14 = O14mm P = Prominent 3 = Wires 4 = Rear epoxy Pins 5 = Rear epoxy Wires 6 = Short body Pins 7 = Short body Wires Anodised Flush AR = Red YY = Bi-color ZZ = Tri-color AG = Green 28 = 28VDC AY = Yellow AB = Blue HR = Hyper Bright Red 28A = 28VAC/DC AN = Black HG = Hyper Bright Green 110 = 110VAC HY = Hyper Bright Yellow 220 = 220VAC HO = Hyper Bright Orange SR = Super Bright Red SG = Super Bright Green Example Q14F5ABXXB12E O14mm, Flush bezel, wire termination, blue LED anodized blue finish, fixed light, 12VDC LED, IP67 panel sealed, SY = Super Bright Yellow SB = Super Bright Blue SW = Super Bright White RG = Red/Green RY = Red/Yellow GY = Green/Yellow RYG = Red/Yellow/Green * Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) * Standard wire length is 200mm, 22AWG UL1007, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM * For LEDs with alternative voltages consult APEM * Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced - Bi-colors are available up to 28VDC * Take care when soldering to the Faston terminals (recommended solder temperature 300C - 3 sec) * Short body pins and wires are only available up to 28VDC * The Tri-color LED has red and green LEDs when both are connected yellow is produced * Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-) * Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode * Tri-color pins are center (-) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red * Maximum panel thickness 11mm * We recommend using Hyper bright LEDs for use at 110VAC and 220VAC * For multi-voltage options please consult APEM * = For resistorless versions (02) please refer to the forward voltage on page 1 APEM www.apem.com 5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Apem: Q14P1CKKR12 Q14P1CXXSB12 Q14P1CXXSG12 Q14P1CXXSR12 Q14P1CXXSY12 Q14P1CXXG110 Q14P1CXXG12 Q14P1CXXR110 Q14P1CXXR12 Q14P1CXXY110 Q14P1CXXY12 Q14P7BXXSG12E Q14P7BXXSW12E Q14P1CZZRYG02E Q14P1CXXY24E Q14P1CXXG12E Q14P1CXXR12E Q14P1CXXG24E Q14P1CXXY12E Q14P1CZZRYG24E Q14P1CXXR24E Q14P1CZZRYG12E Q14F1BXXB110E Q14F1BXXB12E Q14F1BXXG110E Q14F1BXXG12E Q14F1BXXG24E Q14F1BXXR110E Q14F1BXXR12E Q14F1BXXR24E Q14F1BXXW110E Q14F1BXXW12E Q14F1BXXW24E Q14F1BXXY110E Q14F1BXXY12E Q14F1BXXY24E Q14F1CXXB110E Q14F1CXXB12E Q14F1CXXG110E Q14F1CXXG12E Q14F1CXXG24E Q14F1CXXR110E Q14F1CXXR12E Q14F1CXXR24E Q14F1CXXW110E Q14F1CXXW12E Q14F1CXXW24E Q14F1CXXY110E Q14F1CXXY12E Q14F1CXXY24E Q14P1BXXB110E Q14P1BXXB12E Q14P1BXXG110E Q14P1BXXG12E Q14P1BXXG24E Q14P1BXXR110E Q14P1BXXR12E Q14P1BXXR24E Q14P1BXXW110E Q14P1BXXW12E Q14P1BXXW24E Q14P1BXXY110E Q14P1BXXY12E Q14P1BXXY24E Q14P1BZZRYG12E Q14P1BZZRYG24E Q14P1CXXB110E Q14P1CXXB12E Q14P1CXXG110E Q14P1CXXR110E Q14P1CXXW110E Q14P1CXXW12E Q14P1CXXW24E Q14P1CXXY110E Q14F1BXXB24E Q14F1CXXB24E Q14P1BXXB24E Q14P1CXXB24E Q14F7CXXG12E Q14P1CKKR24E Q14P3CXXSR12E Q14P1GXXSY24E Q14P1CXXR28E Q14P1CXXG28E Q14F3CXXG12E Q14P1CXXB28E Q14F3BXXB24E Q14P3CXXG12E Q14F3BXXG24E Q14F3BXXG12E Q14F3BXXR24E Q14F3CXXR24E Q14P3BXXB12E Q14F3BZZRYG12E Q14P1CXXG06E Q14P1CXXG220E Q14P7CZZRYG02E Q14P1CXXG02E Q14P7CZZRYG06E Q14P3CZZRYG12E