05258 VSMF05LCC Only One Name Means ProTek'TionTM multi-line low capacitance tvs array Description The VSMF05LCC is a 5 Volt, low capacitance, multi-line TVS array. This device is designed to protect wireless telecommunications and portable electronic applications from the damaging effects of ESD and EFT. The VSMF05LCC is available in a 5 line unidirectional or 4 line bidirectional configuration with a working voltage of 5 Volts and a minimum breakdown voltage of 6 Volts. This device is rated at 25 Watts peak pulse power, which is sufficient protection for tertiary type lightning threats at key interface locations. Packaged in a miniature SOT-963, the VSMF05LCC meets IEC 61000-4-2 (ESD) and 61000-4-4 (EFT) immunity requirements. Each device should be placed near a connector to provide the best protection against transients. sot-963 package Features applications * * * * * * * * * * * * * * * * Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns 25 Watts Peak Pulse Power per Line(tp = 8/20s) Monolithic Design Available in 5 Volts Low Clamping Voltage ESD Protection > 25 kilovolts Low Leakage Current Low Capacitance: 9pF Protects 4 Bidirectional Lines & 5 Unidirectional Lines RoHS Compliant REACH Compliant Communication Systems SMART Phones Portable Electronics Video Interfaces mechanical characteristics * * * * * * Molded JEDEC SOT-963Package Approximate Weight: 3 milligrams Lead-Free Nickel Paladium Gold Plating Solder Reflow Temperature - 260-270C Flammability Rating UL 94V-0 8mm Tape and Reel per EIA Standard 481 PIN CONFIGURATION 05258.R4 4/11 1 6 2 5 3 4 Page 1 www.protekdevices.com 05258 VSMF05LCC Only One Name Means ProTek'TionTM typical device characteristics MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20s) - See Figure 1 Operating Temperature SYMBOL VALUE UNITS PPP 25 Watts TL -55 to 150 C Storage Temperature TSTG -55 to 150 C Maximum Forward Voltage @ 10mA VF 1.0 V ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified PART NUMBER VSMF05LCC device marking 5B RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE VWM VOLTS 5.0 MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE (Note 1) @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (Fig. 2) @ I P = 2A VC VOLTS @V WM ID A @0V, 1MHz C pF 6.0 12.0 1 9 NOTES 1. Pins 1, 3, 4, 5 or 6 to pin 2. 05258.R4 4/11 Page 2 www.protekdevices.com 05258 VSMF05LCC Only One Name Means ProTek'TionTM typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 1,000 100 25W, 8/20s Waveform 10 1 0.1 10 100 td - Pulse Duration - s Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8s td = 20s e-t 60 40 10,000 figure 3 power derating curve Peak Pulse Power 8/20s 80 % Of Rated Power tf 100 td = t/(IPP/2) 60 40 20 20 0 1,000 figure 2 pulse wave form 120 IPP - Peak Pulse Current - % of IPP 1 0 05258.R4 4/11 5 10 15 t - Time - s 20 25 0 30 Page 3 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - C 150 www.protekdevices.com 05258 VSMF05LCC Only One Name Means ProTek'TionTM sot-963 package information outline dimensions dim millimeters A C K inches min max min max A 0.95 1.05 0.037 0.041 B 0.75 0.85 0.029 0.034 C 0.40 0.50 0.016 0.020 D 0.10 0.20 0.004 0.008 G 0.35 0.40 0.014 0.016 J 0.05 0.15 0.002 0.006 K 0.10 0.15 0.004 0.006 S 0.95 1.05 0.037 0.041 B S 1 D G J NOTES 1. Controlling dimension: inches. 2. Dimensioning and tolerances per ANSI Y14.5M, 1985. 3. Dimensions are exclusive of mold flash and metal burrs. C pad layout dimensions dim millimeters inches NOMINAL NOMINAL A 0.90 0.035 B 0.76 0.030 C 0.20 0.008 D 0.20 0.008 E 0.35 0.014 NOTES E A D B 1. Controlling dimension: inches. 05258.R4 4/11 Page 4 www.protekdevices.com 05258 VSMF05LCC Only One Name Means ProTek'TionTM TAPE AND REEL P0 10 Pitches Cumulative Tolerance on Tape. 0.2 P2 D t E Top Cover Tape A0 F W K0 Pin 1 B0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7") 8mm A0 B0 K0 D E F W P0 P2 P 1.17 0.05 1.17 0.05 0.66 0.05 1.50 0.10 1.75 0.10 3.50 0.05 8.00 0.30 4.00 0.10 2.00 0.05 4.00 0.10 tmax 0.25 Notes 1. 2. 3. 4. 5. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T74 = 7" Reel - 4,000 pieces per 8mm tape. Suffix - T13 = 13" Reel - 10,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and pin one defined by dot on package. Package outline, pad layout and tape specifications per document number 06070.R1 3/11. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty VSMF05LCC -P -T74 4,000 7" n/a VSMF05LCC -P -T13 10,000 13" n/a 05258.R4 4/11 Page 5 www.protekdevices.com 05258 VSMF05LCC Only One Name Means ProTek'TionTM company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT (c) ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05258.R4 4/11 Page 6 www.protekdevices.com