Solid State Devices, Inc.
14701 Firestone Blvd * La Mira da, Ca 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
ssdi@ssdi-power.com * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information 1/
1N3909 __ __
Screening 2/ __ = Not Screened
TX = TX Level
TXV = TXV Level
S = S Level
Pin Configuration __ = Normal (Cathode to Stud)
(See Table 1) R = Reverse (Anode to Stud)
Family/Voltage 1N3909 = 50V
1N3910 = 100V
1N3911 = 200V
1N3912 = 300V
1N3913 = 400V
1N3909
Thru
1N3913
30A, 200nsec, 50-400 V
Fast Recovery Rectifier
Features:
Fast Recovery: 200nsec Maximum (100nsec typ.) 3/
Low Reverse Leakage Current
Single Chip Construction
PIV to 400V, Higher Voltages Available
Hermetically Sealed Isolated Package
High Surge Rating
TX, TXV, and S-Level Screening Available 2/
Maximum Ratings 4/ Symbol Value Units
Peak Repetitive Reverse Voltage
1N3909
1N3910
1N3911
1N3912
1N3913
VRRM
VRWM
VR
50
100
200
300
400
Volts
Average Rectified Forward Current
(Resistive Load, 60 Hz Sine Wave, TA = 25 °C) Io 30 Amps
Peak Surge Current
(8.3 ms Pulse, Half Sine Wave, TA = 25 °C, per leg) IFSM 300 Amps
Operating & Storage Temperature TOP
TSTG
-55 to +150
-65 to +175 ºC
Maximum Total Thermal Resistance
Junction to Case
RθJC 1.2 ºC/W
Notes:
1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory.
2/ Screened to MIL-PRF-19500.
3/ Recovery Conditions: IF = 500 mA, IR = 1 Amp, IRR = 250 mA.
4/ Unless Otherwise Specified, All Maximum Ratings/Electrical Characteristics @25°C.
DO-5:
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0114A DOC
Solid State Devices, Inc.
14701 Firestone Blvd * La Mira da, CA 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
ssdi@ssdi-power.com * www.ssdi-power.com
1N3909
Thru
1N3913
Electrical Characteristics (per leg) 4/ Symbol Max Units
Maximum Instantaneous Forward Voltage Drop
(Pulsed)
IF = 30A, TA = 25 ºC
IF = 30A, TA = -55 ºC VF1
VF2
1.40
1.50 VDC
Maximum Reverse Leakage Current
(Rated VR Minimum) TA = 25 ºC
TA = 100 ºC IR1
IR2
80
10 μA
mA
Maximum Reverse Recovery Time
(IF = 500 mA, IR = 1 Amp, IRR = 250 mA) tRR 200 nsec
Typical Junction Capacitance
(VR = 10VDC, TA = 25ºC, f = 1MHz) CJ 200 pF
Notes:
1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory.
2/ Screened to MIL-PRF-19500.
3/ Recovery Conditions: IF = 500 mA, IR = 1 Amp, IRR = 250 mA.
4/ Unless Specified Otherwise, All Maximum Ratings/Electrical Characteristics are @25°C.
Table 1- PIN ASSIGNMENT
Code
Configuration Terminal Stud
__ Normal Anode Cathode
R Reverse Cathode Anode
DO-5 Outline (Normal Pin Configuration Shown):
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0114A DOC