1N3909 Thru 1N3913 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer's Data Sheet Part Number/Ordering Information 1/ 1N3909 __ __ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV Level S = S Level Pin Configuration __ = Normal (Cathode to Stud) (See Table 1) R = Reverse (Anode to Stud) Family/Voltage 1N3909 = 50V 1N3910 = 100V 1N3911 = 200V 1N3912 = 300V 1N3913 = 400V 30A, 200nsec, 50-400 V Fast Recovery Rectifier Features: * * * * * * * Maximum Ratings 4/ Peak Repetitive Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25 C) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25 C, per leg) Operating & Storage Temperature Maximum Total Thermal Resistance Junction to Case 1N3909 1N3910 1N3911 1N3912 1N3913 Fast Recovery: 200nsec Maximum (100nsec typ.) 3/ Low Reverse Leakage Current Single Chip Construction PIV to 400V, Higher Voltages Available Hermetically Sealed Isolated Package High Surge Rating TX, TXV, and S-Level Screening Available 2/ Symbol Value Units VRRM VRWM VR 50 100 200 300 400 Volts Io 30 Amps IFSM 300 Amps TOP TSTG -55 to +150 -65 to +175 C RJC 1.2 C/W DO-5: Notes: 1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Recovery Conditions: IF = 500 mA, IR = 1 Amp, IRR = 250 mA. 4/ Unless Otherwise Specified, All Maximum Ratings/Electrical Characteristics @25C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0114A DOC 1N3909 Thru 1N3913 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Electrical Characteristics (per leg) 4/ Symbol Max Units IF = 30A, TA = 25 C IF = 30A, TA = -55 C VF1 VF2 1.40 1.50 VDC TA = 25 C TA = 100 C IR1 IR2 80 10 A mA Maximum Reverse Recovery Time (IF = 500 mA, IR = 1 Amp, IRR = 250 mA) tRR 200 nsec Typical Junction Capacitance (VR = 10VDC, TA = 25C, f = 1MHz) CJ 200 pF Maximum Instantaneous Forward Voltage Drop (Pulsed) Maximum Reverse Leakage Current (Rated VR Minimum) Notes: 1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Recovery Conditions: IF = 500 mA, IR = 1 Amp, IRR = 250 mA. 4/ Unless Specified Otherwise, All Maximum Ratings/Electrical Characteristics are @25C. Table 1- PIN ASSIGNMENT Code Configuration Terminal Stud __ Normal Anode Cathode R Reverse Cathode Anode DO-5 Outline (Normal Pin Configuration Shown): NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0114A DOC