ME PLC 40... Multifunctional housing for complex electronics Data sheet 105504_en_01 1 (c) PHOENIX CONTACT 2013-04-08 Description The housings of the ME PLC 40... product group consist of a 40-mm wide housing base with much space for the PCB assembly. The housing base can be combined with various covers. There are connection technology carriers on which the PCB plug-in connectors (FKCN 2.5...) are already premounted. These plug-in connectors have a push-in connection for conductor cross sections up to 2.5 mm. Bus connectors are available with the number of positions 50/40 and 10/10, i.e. 50-pos. in the DIN rail / 40-pos. into the device or otherwise 10-pos. in the DIN rail / 10-pos. into the device. If you do not need a bus connector, you can also fasten the housing onto two NS 35 DIN rails. In addition, a connection technology carrier with RJ45-plugin connectors and a universal cover are available. The universal cover is especially suited for installing connection systems or display and operating elements. We would be glad to install the required openings for you. The housings can be snapped onto an NS 105/20 DIN rail. They can be combined with a DIN rail connector. The bus connectors supplied unmounted and can be equipped with PCBs as needed. The 3D housing data can be found at phoenixcontact.net/products. Make sure you always use the latest documentation. It can be downloaded at phoenixcontact.net/products. This data sheet is valid for all products listed on the following page: ME PLC 40... Table of contents 1 Description.................................................................................................................................. 1 2 Ordering data.............................................................................................................................. 3 3 Overview of the ME PLC Products.............................................................................................. 4 4 Lower part of the housing............................................................................................................ 5 4.1 4.2 5 Connection technology carrier ...........................................................................................................................6 5.1 5.2 5.3 5.4 5.5 5.6 5.7 6 Dimensional drawing array ...........................................................................................................................27 Dimensional drawing fitted plate...................................................................................................................27 Dimensional drawing of the PCB for mounting under array or fitted plate .....................................................28 Dimensional drawing housing PCB (housing with array or with fitted plate)..................................................28 Close with cover (without array or fitted plate) .......................................................................... 29 8.1 9 Bus connector 50/40 ....................................................................................................................................15 Bus connector 10/10 ....................................................................................................................................21 Array and fitted plate................................................................................................................. 27 7.1 7.2 7.3 7.4 8 Connection of the conductors to the PCB plug-in connector (push-in connection) .........................................6 Place the connection technology carrier on the housing base ........................................................................6 Connection technology carrier CT10 ..............................................................................................................7 Connection technology carrier CT20 ..............................................................................................................9 Connection technology carrier CT36 ............................................................................................................11 Connection technology carrier RJ45 ............................................................................................................13 Universal cover CL .......................................................................................................................................14 Bus connector set ..................................................................................................................... 15 6.1 6.2 7 Outer dimensions of the housing base ...........................................................................................................5 Inner dimensions of the housing base ............................................................................................................5 Dimensional drawing housing PCB ..............................................................................................................29 Mounting on a DIN rail .............................................................................................................. 30 9.1 9.2 105504_en_01 Mounting on NS 105/20................................................................................................................................30 Mounting on NS 35/15..................................................................................................................................30 PHOENIX CONTACT 2 ME PLC 40... 2 Ordering data Housing DESCRIPTION Type Order no. Pcs. / pack Housing base, suitable for 50/40 bus connector, color: light gray ME PLC 40 B BUS 50/40 GY7035 2201500 10 Housing base, suitable for 10/10 bus connector, color: light gray ME PLC 40 B BUS 10/10 GY7035 2201499 10 Universal cover, long design, color: light gray ME PLC 40 CL GY7035 2201505 10 Connection technology carrier, fully assembled with FKCN 2 x 10-pos., cover and release lever, incl. fitted cover ME PLC 40 CT20 GY7035 2201493 10 ME PLC 40 CT36 GY7035 2201494 10 ME PLC 40 CT10 GY7035 2201492 10 ME PLC 40 CTRJ45 GY7035 2201495 10 Matching PCB plug-in connector: 1 x CCDN 2.5/10-G1 P26 THR (1734355) Connection technology carrier, fully assembled with FKCN 2 x 18-pos., cover and release lever, incl. fitted cover Matching PCB plug-in connector: 1 x CCDN 2.5/18-G1 P26 THR (1734436) Connection technology carrier, fully assembled with FKCN 1 x 10-pos., cover and release lever, incl. fitted cover Matching PCB plug-in connector: MSTBA 2.5/10-G (1757543) Connection technology carrier for RJ45 connection, pre-assembled with cover and release lever; incl. fitted cover and 2 x RJ45 connector plugs Accessories DESCRIPTION Type Order no. Pcs. / pack Cover, short design, color: light gray ME PLC 40 CS GY7035 2201490 10 Cover, short design, color: transparent ME PLC 40 CS TRANS 2201491 10 Fitted plate, for assembly underneath the cover in short design (ME PLC 40 CS...), color: light gray ME PLC 40 PL S GY7035 2201497 10 Matrix with defined engagement mechanism, for assembly underneath the cover in short design (ME PLC 40 CS...), color: black ME PLC 40 MT S BK 2201496 10 Bus connector kit consisting of 50-pos. and 40-pos. plug-in connectors, plastic upper part and base, plus metal clamps for mounting the DIN rail, PCB not included ME PLC 40 BUS 50/40 KIT BK 2201502 10 Bus connector kit consisting of 2 x 10-pos. plug-in connectors, plastic upper part and base, plus metal clamp for mounting the DIN rail, PCB not included ME PLC 40 BUS 10/10 KIT BK 2201503 10 End brackets for DIN rail mounting, incl. mounting screws ME PLC EBT GY7035 2201498 10 DIN rail, unperforated, 105 x 20 mm, galvanized and thick layer passivated, cut to customer-specific length (between 40 mm and 2000 mm) NS 105/20 UNPERF 2201508 1 Drop, color: red COD PI 4 RD 2201618 100 Rectangle, color: red COD PI 2 RD 2901877 100 Drop, color: green COD PI 1 GN 2901864 100 Rectangle, color: green COD PI 3 GN 2201617 100 Specify length in [mm] according to order key: quantity / order no. / length (e.g. for 1 x 40 mm long: 1 / 2201508 / 40) Coding set, for coding housing base and bus connector 105504_en_01 PHOENIX CONTACT 3 ME PLC 40... 3 Overview of the ME PLC Products ME PLC 40 CS TRANS ME PLC 40 CS GY7035 ME PLC 40 MT S BK ME PLC 40 PL S GY7035 ME PLC 40 CL ME PLC 40 CTRJ45 ME PLC EBT ME PLC 40 CT10 ME PLC 40 CT36 ME PLC 40 CT20 ME PLC 40 B BUS 50/40 ME PLC 40 B BUS 10/10 ME PLC 40 BUS 50/40 KIT ME PLC 40 BUS 10/10 KIT NS 105/20 Figure 1 105504_en_01 Overview PHOENIX CONTACT 4 ME PLC 40... 4 Lower part of the housing 4.1 Housing base, suitable for 50/40 bus connector, color: light gray ME PLC 40 B BUS 50/40 GY7035 2201500 Housing base, suitable for 10/10 bus connector, color: light gray ME PLC 40 B BUS 10/10 GY7035 2201499 Outer dimensions of the housing base 4.2 Inner dimensions of the housing base 180 145 159 22 1,5 27,9 5,6 Figure 2 Housing base, side view Figure 4 Housing base, internal view 40 166,8 20 94 134 139 37 Figure 5 Figure 3 Housing base, front view Maximum dimensions of the PCB of the housing The detailed PCB contour and the locked areas can be found in the 3D housing data. The 3D-CAD download can be found at phoenixcontact.net/products. 105504_en_01 PHOENIX CONTACT 5 ME PLC 40... 5 Connection technology carrier 5.1 Connection of the conductors to the PCB plugin connector (push-in connection) 5.2 * * Place the connection technology carrier on the housing base Swivel the red lever to the right. Hook in the two engagement noses of the connection technology carrier into the openings of the housing base. . A Figure 6 Push-in connection B 1.5 mm conductor cross section ... 2.5 mm, rigid or with ferrule * Insert the stripped wire into the round opening of the terminal block without using a tool. Wires with a smaller cross section or stranded conductors without ferrule * Figure 7 Snap in Figure 8 Close To release the spring, push in the orange pushbutton with a screwdriver. Dismantling * For release, push in the orange pushbutton with a screwdriver. * 105504_en_01 Swivel the lever back to the left. The connection technology carrier slides into the housing. If that does not go easily, check the seating of the engagement noses. PHOENIX CONTACT 6 ME PLC 40... 5.3 5.3.1 Connection technology carrier CT10 Connection technology carrier, fully assembled with FKCN 1 x 10-pos., cover and release lever, incl. fitted cover ME PLC 40 CT10 GY7035 2201492 Matching PCB plug-in connector MSTBA 2.5/10-G 1757543 Dimensional drawing PCB fragment and drilling diagram CT10 166,8 45 5 5 5 5 5 5 5 5 5 3,5 10 Figure 9 3,45 O 1,4 26,7 Dimensional drawing of the PCB of the housing when using the connection technology carrier CT10 The detailed PCB contour and the locked areas can be found in the 3D housing data. The 3D-CAD download can be found at phoenixcontact.net/products. 105504_en_01 PHOENIX CONTACT 7 ME PLC 40... 5.3.2 PCB plug-in connector for CT10 To connect the connection technology carrier ME PLC 40 CT10 to the PLC, you need the PCB plug-in connector MSTBA 2.5/10-G. a = 45 mm 22 12 Dimensions / Positions Length Pitch Dimension a No. of positions Pin dimensions Hole diameter 12 mm 5 mm 45 mm 10 1 x 1 mm 1.4 mm 3,5 8,6 15 a+7 MSTBA 2.5/10-G, 1757543 Figure 10 105504_en_01 2 3,5 Technical data Range of articles 5 a Dimensions MSTBA 2.5/10-G Insulation material group Rated surge voltage (III/3) Rated surge voltage (III/2) Rated surge voltage (II/2) Rated voltage (III/2) Rated voltage (II/2) Connection in acc. with standard Nominal current IN Nominal voltage UN Maximum load current Insulation material Inflammability class in acc. with UL 94 Color Nominal voltage, UL/CUL Use Group B Nominal current, UL/CUL Use Group B Nominal voltage, UL/CUL Use Group D Nominal current, UL/CUL Use Group D MSTBA 2.5/...G-... IIIa 4 kV 4 kV 4 kV 320 V 400 V EN-VDE 12 A 250 V 12 A PBT V0 green 300 V 15 A 300 V 15 A PHOENIX CONTACT 8 ME PLC 40... 5.4 5.4.1 Connection technology carrier CT20 Connection technology carrier, fully assembled with FKCN 2 x 10-pos., cover and release lever, incl. fitted cover ME PLC 40 CT20 GY7035 2201493 Matching PCB plug-in connector CCDN 2.5/10-G1 P26 THR 1734355 Dimensional drawing PCB fragment and drilling diagram CT20 166,8 45 5 5 5 5 5 5 5 5 5 3,9 10 Figure 11 3,45 5 O 1,6 26,7 Dimensional drawing of the PCB of the housing when using the connection technology carrier CT20 The detailed PCB contour and the locked areas can be found in the 3D housing data. The 3D-CAD download can be found at phoenixcontact.net/products. 105504_en_01 PHOENIX CONTACT 9 ME PLC 40... 5.4.2 PCB plug-in connector for CT20 To connect the connection technology carrier ME PLC 40 CT20 with the PLC, you need the PCB plug-in connector CCDN 2.5/10-G1 P26 THR. a = 45 mm a+7,8 20,1 17,6 CCDN 2.5/10-G1 P26 THR, 1734355 Dimensions / Positions Length Pitch Dimension a No. of positions Pin dimensions Hole diameter 17.6 mm 5 mm 45 mm 10 1x1 1.6 mm 2,6 Technical data Range of articles 10 5 3,9 5 a Figure 12 105504_en_01 Dimensions CCDN 2.5/10-G1 P26 THR Insulation material group Rated surge voltage (III/3) Rated surge voltage (III/2) Rated surge voltage (II/2) Rated voltage (III/2) Rated voltage (II/2) Connection in acc. with standard Nominal current IN Nominal voltage UN Maximum load current Insulation material Inflammability class in acc. with UL 94 Color CCDN 2.5/..G1-THR IIIa 4 kV 4 kV 4 kV 400 V 400 V EN-VDE 12 A 320 V 12 A LCP V0 black PHOENIX CONTACT 10 ME PLC 40... 5.5 5.5.1 Connection technology carrier CT36 Connection technology carrier, fully assembled with FKCN 2 x 18-pos., cover and release lever, incl. fitted cover ME PLC 40 CT36 GY7035 2201494 Matching PCB plug-in connector CCDN 2.5/18-G1 P26 THR 1734436 Dimensional drawing PCB fragment and drilling diagram CT36 166,8 85 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3,9 10 Figure 13 3,45 5 O 1,6 26,7 Dimensional drawing of the PCB of the housing when using the connection technology carrier CT36 The detailed PCB contour and the locked areas can be found in the 3D housing data. The 3D-CAD download can be found at phoenixcontact.net/products. 105504_en_01 PHOENIX CONTACT 11 ME PLC 40... 5.5.2 PCB plug-in connector for CT36 To connect the connection technology carrier ME PLC 40 CT36 to the PLC, you need the PCB plug-in connector CCDN 2.5/18-G1 P26 THR. a = 85 mm a+7,8 2,6 20,1 17,6 10 5 3,9 5 a Figure 14 105504_en_01 Dimensions CCDN 2.5/18-G1 P26 THR CCDN 2.5/18-G1 P26 THR, 1734436 Dimensions / Positions Length Pitch Dimension a No. of positions Pin dimensions Hole diameter 17.6 mm 5 mm 85 mm 18 1x1 1.6 mm Technical data Insulation material group Rated surge voltage (III/3) Rated surge voltage (III/2) Rated surge voltage (II/2) Rated voltage (III/2) Rated voltage (II/2) Connection in acc. with standard Nominal current IN Nominal voltage UN Maximum load current Insulation material Inflammability class in acc. with UL 94 Color IIIa 4 kV 4 kV 4 kV 400 V 400 V EN-VDE 12 A 320 V 12 A LCP V0 black PHOENIX CONTACT 12 ME PLC 40... Connection technology carrier RJ45 Connection technology carrier for RJ45 connection, preassembled with cover and release lever; incl. fitted cover and 2 x RJ45 connector plugs 2201495 2, 04 13 2, 04 6 15 ,3 5 2, 1, 8 5 1, 4, 2 1 2 5, Figure 15 45 8, 7 6, 45 11 ,9 4 8, 4 O 3, 2 15 ,7 O 5 1, 6 7 3, 16 ,3 7 5, 4, 2 O 0, 9 6 Dimensional drawing PCB fragment and drilling diagram RJ45 6, 4 5.6.1 ME PLC 40 CTRJ45 GY7035 11 ,1 5.6 Dimensional drawing of the PCB housing when using the connection technology carrier RJ45 The detailed PCB contour and the locked areas can be found in the 3D housing data. The 3D-CAD download can be found at phoenixcontact.net/products. Technical data Connector type Contact type Number of contacts Number of locations Number of ports LAN type Contact connection 105504_en_01 RJ45 Socket 8 8 1 CAT6A Push-through assembly, perpendicular PHOENIX CONTACT 13 ME PLC 40... 5.7 Universal cover CL Universal cover, long design, color: light gray 2201505 Dimensional drawing PCB CL 4 104 3 1 Figure 16 5,5 2 1, 17,6 2 1, 2 1, 2 R R 1, R R 2 17,6 5,5 1 2 5.7.1 ME PLC 40 CL GY7035 Dimensional drawing of the PCB of the housing when using the universal cover CL 105 14 28 A Figure 17 Maximum useable area for break-outs (A) The middle lines in Figure 16 and Figure 17 refer to the location in the housing base. We can gladly make openings for any of your display or operating elements. The detailed PCB contour and the locked areas can be found in the 3D housing data. The 3D-CAD download can be found at phoenixcontact.net/products. 105504_en_01 PHOENIX CONTACT 14 ME PLC 40... 6 Bus connector set 6.1 Bus connector 50/40 Bus connector kit consisting of 50-pos. and 40-pos. plug-in connectors, plastic upper part and base, plus metal clamps for mounting the DIN rail, PCB not included 6.1.1 Overview of the set 50/40 6.1.2 * * A2 A1 2201502 Mounting Solder the plug-in connectors A1, A2, and B1 onto your PCB. Solder the two metal terminals onto your PCB. Observe the proper orientation of the PCB when inserting it into the housing. The housing base has raised supports on one side. The PCB side with the cut-out belongs on this side. B2 B1 ME PLC 40 BUS 50/40 KIT BK * * * Insert the PCB. Put the top and bottom parts together. Solder the plug-in connector B2 to the PCB of the housing base ME PLC 40 B BUS 50/40 GY7035, 2201499. 6.1.3 Coding You have the option to codify the bus connector and the housing. This should prevent a housing being accidentally plugged onto the wrong bus connector. Figure 19 Figure 18 105504_en_01 Overview set 50/40 Coding option Coding sets in rectangular and drop form are available (see "Ordering data" on page 3). * Plug one part of the coding set into the opening of the bus connector. * The counter-part goes into the housing. PHOENIX CONTACT 15 ME PLC 40... 6.1.4 Dimensional drawing PCB 50/40 2,4 19,6 86 41,9 2 3,1 1, 2,2 1,5 10,1 R 39,6 27,7 15,6 21,7 8,7 Figure 20 1,5 O1,35 2,5 2,55 10 2,5 27,7 Dimensional drawing of the PCB for the bus connector set 50/40 The detailed PCB contour and the locked areas can be found in the 3D housing data. The 3D-CAD download can be found at phoenixcontact.net/products. 105504_en_01 PHOENIX CONTACT 16 ME PLC 40... 6.1.5 50-pos. plug-in connector (A1) for 50/40 A1 41,70 37,88 36,02 3,2 7,65 17,45 6,58 1,27 10,44 12,34 Figure 21 3,81 5,61 30,48 3,81 Dimensions A1, 50-pos O1 O2,6 Figure 22 2,54 1,22 6,93 3,81 3,81 3,12 5,61 Technical data Current per connection Voltage Inflammability class in acc. with UL 94 Color Temperature range, operating 1 A, maximum 30 V V0 black -55C ...+105C Lead-free 2,54 1,9 1.27 mm 41.70mm 50 4 Perpendicular 1.0 2.80 mm 1.60 mm Solder connection Type of contact 37,9 27,94 6,88 Dimensions / Positions Pitch Width No. of positions Number of rows Orientation Hole diameter Length of the solder pin Recommended thickness of the PCB 30,48 Soldering method SMC & Wave capable (TH only) 5s Duration at maximum processing temperature Cycles at maximum processing temper- 1, maximum ature Processing temperature maximum 270C 1 Drilling diagram A1, 50-pos. The precise location of the plug-in connectors on the PCB can be found in Figure 20 on page 16. 105504_en_01 PHOENIX CONTACT 17 ME PLC 40... 6.1.6 50-pos. plug-in connector (A2) for 50/40 A2 41,70 17,45 6,58 1,27 3,81 10,44 12,34 Figure 23 5,61 3,81 30,48 37,88 Dimensions A2, 50-pos. 30,48 1,3 10,44 3,81 O0,8 1,91 6,88 O2,6 2,54 27,94 37,88 Figure 24 1.27 mm 50 4 Perpendicular 0.8 mm 2.79 mm 1.60 mm Technical data Current per connection Voltage Inflammability class in acc. with UL 94 Color Temperature range, operating 1 A, maximum 30 V V0 black -40C ...+105C 2,54 3,2 5,61 Dimensions / Positions Pitch No. of positions Number of rows Orientation Hole diameter Length of the solder pin Recommended thickness of the PCB Solder connection Type of contact 1 3,81 3,28 7,65 36,02 Lead-free Soldering method SMC & Wave capable (TH only) 5s Duration at maximum processing temperature Cycles at maximum processing temper- 1, maximum ature Processing temperature maximum 270C Drilling diagram A2, 50-pos. The precise location of the plug-in connectors on the PCB can be found in Figure 20 on page 16. 105504_en_01 PHOENIX CONTACT 18 ME PLC 40... 6.1.7 40-pos. plug-in connector (B1) for 50/40 B1 36,75 34,11 7,1 2,54 10 32,47 0,7 1,27 3,8 3,8 Figure 25 6,31 0,7 22,86 1 Solder connection Lead-free soldering process Yes O2,6 0,7 O1 2,7 6,31 1 A, maximum 250 V AC LCP V0 black 3,81 3,81 2,2 3,55 1,32 Technical data Current per connection Voltage Insulation material Inflammability class in acc. with UL 94 Color 0,7 2,54 1.27 mm 40 4 Vertical 1.0 mm 2.54 mm 1.60 mm 24,13 Dmensions B1, 40-pos. 7,58 Dimensions / Positions Pitch No. of positions Number of rows Orientation Hole diameter Length of the solder pin Recommended thickness of the PCB 2,54 22,86 34,11 Figure 26 Drilling diagram, 40-pos. The precise location of the plug-in connectors on the PCB can be found in Figure 20 on page 16. 105504_en_01 PHOENIX CONTACT 19 ME PLC 40... 6.1.8 40-pos. plug-in connector (B2) for contacting in the bus connector set 50/40 B2 35,33 31,53 29,67 7,65 17,46 3,1 6,16 1,27 3,81 10,17 24,13 1.27 mm 40 4 Perpendicular 1.0 mm 3.10 mm 1.60 mm Technical data Current per connection Voltage Insulation material Inflammability class in acc. with UL 94 Color 1 A, maximum 250 V AC LCP V0 black Solder connection Lead-free soldering process Yes 3,81 12,07 Figure 27 5,6 Dimensions / Positions Pitch No. of positions Number of rows Orientation Hole diameter Length of the solder pin Recommended thickness of the PCB Dimensions B2, 40-pos. 1 22,86 2,54 3,81 3,81 7,02 3,21 1,31 5,6 6,87 O1 O2,6 2,54 22,86 1,9 Drilling diagram B2, 40-pos. 1,45 9,6 3,4 Figure 28 31,53 31,7 2 1, R 36,51 R1,2 35,5 79,4 8 166,8 Figure 29 105504_en_01 Dimensional drawing of the PCB of the housing (2201500) with plug-in connector (B2) PHOENIX CONTACT 20 ME PLC 40... 6.2 Bus connector 10/10 Bus connector kit consisting of 2 x 10-pos. plug-in connec- ME PLC 40 BUS 10/10 KIT BK tors, plastic upper part and base, plus metal clamp for mounting the DIN rail, PCB not included 6.2.1 Overview of the set 10/10 6.2.2 * * Mounting Solder the plug-in connectors A1, A2, and B1 onto your PCB. Solder the two metal terminals onto your PCB. Observe the proper orientation of the PCB when inserting it into the housing. The housing base has raised supports on one side. The PCB side with the cut-out belongs on this side. B2 A1 2201503 B1 * * * Insert the PCB. Put the top and bottom parts together. Solder the plug-in connector B2 to the PCB of the housing base ME PLC 40 B BUS 10/10 GY7035, 2201500. A2 6.2.3 Coding You have the option to codify the bus connector and the housing. This should prevent a housing being accidentally plugged onto the wrong bus connector. Figure 31 Figure 30 105504_en_01 Overview of the set 10/10 Coding option Coding sets in rectangular and drop form are available (see "Ordering data" on page 3). * Plug one part of the coding set into the opening of the bus connector. * The counter-part goes into the housing. PHOENIX CONTACT 21 ME PLC 40... 6.2.4 Dimensional drawing PCB 10/10 86 2,4 41,9 2,2 1,5 6,5 1,3 19,6 37,8 25,85 25,5 6,26 Figure 32 1,5 5,6 O1,35 2,5 2,55 10 2,5 25,85 Dimensional drawing of the PCB for the bus connector set 10/10 The detailed PCB contour and the locked areas can be found in the 3D housing data. The 3D-CAD download can be found at phoenixcontact.net/products. 105504_en_01 PHOENIX CONTACT 22 ME PLC 40... 6.2.5 10-pos. base strip (A1) for 10/10 MC 1.5/10-G-3.81,1803358 a = 34.29 mm a+5,2 18,7 8 Figure 33 3,81 2,6 3,4 11,1 7,25 9,2 a Dimensions MC 1.5/10-G-3.81 a = 34.29 mm a 2,6 8 1,2 3,81 Figure 34 Drilling diagram MC 1.5/10-G-3.81 Dimensions / Positions Length Pitch Dimension a No. of positions Pin dimensions Hole diameter 9.2 mm 3.81 mm 34.29 mm 10 0.8 x 0.8 mm 1.2 mm Technical data Range of articles Insulation material group Rated surge voltage (III/3) Rated surge voltage (III/2) Rated surge voltage (II/2) Rated voltage (III/2) Rated voltage (II/2) Connection in acc. with standard Nominal current IN Nominal voltage UN Maximum load current Insulation material Inflammability class in acc. with UL 94 Color Nominal voltage, UL/CUL Use Group B Nominal current, UL/CUL Use Group B Nominal voltage, UL/CUL Use Group D Nominal current, UL/CUL Use Group D MC 1.5/..-G IIIa 2.5 kV 2.5 kV 2.5 kV 160 V 250 V EN-VDE 8A 160 V 8A PBT V0 green 300 V 8A 300 V 8A The precise location of the plug-in connectors on the PCB can be found in Figure 32 on page 22. 105504_en_01 PHOENIX CONTACT 23 ME PLC 40... 6.2.6 10-pos. base strip (A2) for 10/10 IMC 1.5/10-G-3.81, 1862658 a = 34.29 mm 25,7 a+4,6 7,8 6,85 14,5 3,4 2,54 1,86 2,3 3,81 a Figure 35 Dimensions IMC 1.5/10-G-3.81 a = 34.29 mm a 1,2 3,81 2,54 1,86 2,3 Figure 36 Drilling diagram IMC 1.5/10-G-3.81 The precise location of the plug-in connectors on the PCB can be found in Figure 32 on page 22. 105504_en_01 Dimensions / Positions Length Pitch Dimension a No. of positions Pin dimensions Hole diameter 14.5 mm 3.81 mm 34.29 mm 10 0.8 x 0.8 mm 1.2 mm Technical data Range of articles Insulation material group Rated surge voltage (III/3) Rated surge voltage (III/2) Rated surge voltage (II/2) Rated voltage (III/2) Rated voltage (II/2) Connection in acc. with standard Nominal current IN Nominal voltage UN Maximum load current Insulation material Inflammability class in acc. with UL 94 Color Nominal voltage, UL/CUL Use Group B Nominal current, UL/CUL Use Group B Nominal voltage, UL/CUL Use Group D Nominal current, UL/CUL Use Group D IMC 1.5/..-G I 2.5 kV 2.5 kV 2.5 kV 160 V 320 V EN-VDE 8A 160 V 8A PA V0 green 300 V 8A 300 V 8A PHOENIX CONTACT 24 ME PLC 40... 6.2.7 10-pos. base strip (B1) for 10/10 MCV 1.5/10-G-3.81, 1803507 11,1 a = 34.29 mm 9,2 18,7 a+5,2 3,4 3 2,6 7,25 Figure 37 3,81 a Dimensions MCV 1.5/10-G-3.81 a = 34.29 mm a 2,6 3 1,2 3,81 Figure 38 Drilling diagram MCV 1.5/10-G-3.81 Dimensions / Positions Length Pitch Dimension a No. of positions Pin dimensions Hole diameter 7.25 mm 3.81 mm 34.29 mm 10 0.8 x 0.8 mm 1.2 mm Technical data Range of articles Insulation material group Rated surge voltage (III/3) Rated surge voltage (III/2) Rated surge voltage (II/2) Rated voltage (III/2) Rated voltage (II/2) Connection in acc. with standard Nominal current IN Nominal voltage UN Maximum load current Insulation material Inflammability class in acc. with UL 94 Color Nominal voltage, UL/CUL Use Group B Nominal current, UL/CUL Use Group B Nominal voltage, UL/CUL Use Group D Nominal current, UL/CUL Use Group D MCV 1.5/..-G IIIa 2.5 kV 2.5 kV 2.5 kV 160 V 250 V EN-VDE 8A 160 V 8A PBT V0 green 300 V 8A 300 V 8A The precise location of the plug-in connectors on the PCB can be found in Figure 32 on page 22. 105504_en_01 PHOENIX CONTACT 25 ME PLC 40... 10-pos. base strip (B2) for contacting in the bus connector set 10/10 6.2.9 a+4,6 7,8 6,85 14,5 3,4 2,54 1,86 2,3 3,81 a Figure 39 Dimensions IMC 1.5/10-G-3.81 a a = 34.29 mm 3,81 2,54 1,2 1,86 2,3 Figure 40 Drilling diagram IMC 1.5/10-G-3.81 The detailed PCB contour and the locked areas can be found in the 3D housing data. The 3D-CAD download can be found at phoenixcontact.net/products. 2 4,2 37,36 3,45 IMC 1.5/10-G-3.81, 1862658 a = 34.29 mm 25,7 Dimensions / Positions Length Pitch Dimension a No. of positions Pin dimensions Hole diameter 14.5 mm 3.81 mm 34.29 mm 10 0.8 x 0.8 mm 1.2 mm Technical data Range of articles Insulation material group Rated surge voltage (III/3) Rated surge voltage (III/2) Rated surge voltage (II/2) Rated voltage (III/2) Rated voltage (II/2) Connection in acc. with standard Nominal current IN Nominal voltage UN Maximum load current Insulation material Inflammability class in acc. with UL 94 Color Nominal voltage, UL/CUL Use Group B Nominal current, UL/CUL Use Group B Nominal voltage, UL/CUL Use Group D Nominal current, UL/CUL Use Group D IMC 1.5/..-G I 2.5 kV 2.5 kV 2.5 kV 160 V 320 V EN-VDE 8A 160 V 8A PA V0 green 300 V 8A 300 V 8A 38,89 R1,2 R1,2 3,4 6.2.8 39,66 5,3 31,7 39,66 47,7 8 166,8 Figure 41 105504_en_01 Dimensional drawing of the PCB of the housing (2201499) with plug-in connector (B2) PHOENIX CONTACT 26 ME PLC 40... 7 Array and fitted plate 7.1 Matrix with defined engagement mechanism, for assembly underneath the cover in short design (ME PLC 40 CS...), color: black ME PLC 40 MT S BK 2201496 Fitted plate, for assembly underneath the cover in short design (ME PLC 40 CS...), color: light gray ME PLC 40 PL S GY7035 2201497 Dimensional drawing array 7.2 Dimensional drawing fitted plate 35,2 35,2 2,9 9,5 3,2 7x3,2 (=22,4) 2,3 47,3 47,3 6,7 8,9 12,5 29,4 7,5 Figure 43 Dimensional drawing fitted plate (2201497) 11,4 15,2 19 Figure 42 We can gladly make openings for any of your display or operating elements. Dimensional drawing array (2201496) The array and the fitted plate can be mounted under the transparent cover. The array has a defined hole raster in which for example LEDs of the 7-segment display can be positioned. The fitted plate can be used universally. 105504_en_01 PHOENIX CONTACT 27 ME PLC 40... Dimensional drawing of the PCB for mounting under array or fitted plate 7.4 Dimensional drawing housing PCB (housing with array or with fitted plate) 35,2 36,9 18,65 O1,3 118,5 13,3 1, 2 1, 2 7,05 3,7 90,6 44,8 0,9 5,7 2 1, R 1, 2 2 1, 2 1, R 2 1, R 6,6 3 7 29,2 79,65 7.3 30,5 Figure 44 Dimensional drawing of the horizontal PCB for mounting under the array (2201496) or the fitted plate (2201497) Figure 45 Dimensional drawing of the perpendicular housing PCB when using the array (2201496) or the fitted plate (2201497) The detailed PCB contour and the locked areas can be found in the 3D housing data. The 3D-CAD download can be found at phoenixcontact.net/products. 105504_en_01 PHOENIX CONTACT 28 ME PLC 40... 8 8.1 Close with cover (without array or fitted plate) Cover, short design, color: light gray ME PLC 40 CS GY7035 2201490 Cover, short design, color: transparent ME PLC 40 CS TRANS 2201491 Dimensional drawing housing PCB 131,7 R 1, 2 2 1, R 2 1, R 79,65 3,7 90,6 Figure 46 6,6 36,9 Dimensional drawing of the housing PCB when using the short cover without array or fitted plate The detailed PCB contour and the locked areas can be found in the 3D housing data. The 3D-CAD download can be found at phoenixcontact.net/products. Both cover versions serve to close the display area of the housing. Display elements can be protected against touch and dust under the transparent cover. The light-gray cover closes off the housing when no display elements are being used. 105504_en_01 PHOENIX CONTACT 29 ME PLC 40... Mounting on a DIN rail 9.1 Mounting on NS 105/20 Mounting on NS 35/15 20 15 9.2 15 9 35 105 35 105 Figure 47 9.1.1 Dimensional drawing with NS 105/20 Order key for DIN rail NS 105/20 Order, for example, a 40-mm long DIN rail with "1 / 2201508 / 40". Quantity 1 Order no. 2201508 Figure 49 Dimensional drawing with NS 35/15 As an alternative, the housing can be snapped onto two NS 35/15 DIN rails. No bus connectors can be mounted in this fastening mode. Length [mm] 40 (c) PHOENIX CONTACT 2014-01-24 - 52004299 _01 - DB EN HQ ME PLC 40 min. 40 mm max. 2000 mm 9.1.2 Dimensions of the DIN rail NS 105/20 20 105 93 Figure 48 105504_en_01 Dimensions NS 105/20 PHOENIX CONTACT GmbH & Co. KG * 32823 Blomberg * Germany phoenixcontact.com 30