3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP APBA3010ESGC-F01 Features HIGH EFFICIENCY RED SUPER BRIGHT GREEN Description 3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm THICKNESS. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide LOW POWER CONSUMPTION. Orange Light Emitting Diode. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLRS AND LENS TYPES AVAILABLE. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAE6829 REV NO: V.4 DATE: MAY/13/2005 PAGE: 1 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000795-01 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type Min. Typ. 4 12 4 12 HIGH EFFICIENCY RED (GaAsP/GaP) APBA3010ESGC-F01 Viewing Angle WATER CLEAR SUPER BRIGHT GREEN (GaP) 2 1/2 140 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength High Efficiency Red Super Bright Green D Dominant Wavelength 1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Super Bright Green 625 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Super Bright Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Super Bright Green 15 15 pF VF=0V;f=1MHz VF Forward Voltage High Efficiency Red Super Bright Green 2.0 2.2 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Super Bright Green Units Power dissipation 105 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating / Storage Temperature V -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAE6829 REV NO: V.4 DATE: MAY/13/2005 PAGE: 2 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000795-01 APBA3010ESGC-F01 High Efficiency Red SPEC NO: DSAE6829 REV NO: V.4 DATE: MAY/13/2005 PAGE: 3 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000795-01 Super Bright Green SPEC NO: DSAE6829 REV NO: V.4 DATE: MAY/13/2005 PAGE: 4 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000795-01 APBA3010ESGC-F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAE6829 REV NO: V.4 DATE: MAY/13/2005 PAGE: 5 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000795-01 PACKING & LABEL SPECIFICATIONS APBA3010ESGC-F01 Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAE6829 REV NO: V.4 DATE: MAY/13/2005 PAGE: 6 OF 6 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000795-01