SPEC NO: DSAE6829 REV NO: V.4 DATE: MAY/13/2005 PAGE: 1 OF 6
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000795-01
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. Specifications are subject to change without notice.
APBA3010ESGC-F01 HIGH EFFICIENCY RED
SUPER BRIGHT GREEN
Description
The High Efficiency Red source color devices are made
with Gallium Arsenide Phosphide on Gallium Phosphide
Orange Light Emitting Diode.
The Super Bright Green source color devices are made
with Gallium Phosphide Green Light Emitting Diode.
Package Dimensions
3.0mmx1.0mm RIGHT ANGLE SMD CHIP
LED LAMP
Features
3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm
THICKNESS.
LOW POWER CONSUMPTION.
WIDE VIEWING ANGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLRS AND LENS TYPES AVAILABLE.
PACKAGE : 2000PCS / REEL.
RoHS COMPLIANT.
SPEC NO: DSAE6829 REV NO: V.4 DATE: MAY/13/2005 PAGE: 2 OF 6
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000795-01
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Part No. Dice Lens Type Iv (mcd)
@ 20mA
Viewing
Angle
Min. Typ. 2θ
θθθ1/2
APBA3010ESGC-F01 HIGH EFFICIENCY RED (GaAsP/GaP) WATER CLEAR 4 12
SUPER BRIGHT GREEN (GaP) 4 12 140°
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength High Efficiency Red
Super Bright Green 627
565 nm IF=20mA
λDDominant Wavelength High Efficiency Red
Super Bright Green 625
568 nm IF=20mA
∆λ1/2 Spectral Line Half-width High Efficiency Red
Super Bright Green 45
30 nm IF=20mA
C Capacitance High Efficiency Red
Super Bright Green 15
15 pF VF=0V;f=1MHz
VFForward Voltage High Efficiency Red
Super Bright Green 2.0
2.2 2.5
2.5 V IF=20mA
IRReverse Current All 10 uA VR = 5V
Parameter High Efficiency Red Super Bright Green Units
Power dissipation 105 105 mW
DC Forward Current 30 25 mA
Peak Forward Current [1] 160 140 mA
Reverse Voltage V
Operating / Storage Temperature -40°C To +85°C
5
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAE6829 REV NO: V.4 DATE: MAY/13/2005 PAGE: 3 OF 6
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000795-01
APBA3010ESGC-F01
High Efficiency Red
SPEC NO: DSAE6829 REV NO: V.4 DATE: MAY/13/2005 PAGE: 4 OF 6
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000795-01
Super Bright Green
SPEC NO: DSAE6829 REV NO: V.4 DATE: MAY/13/2005 PAGE: 5 OF 6
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000795-01
Tape Specifications
(Units : mm)
APBA3010ESGC-F01
Recommended Soldering Pattern
(Units : mm)
SPEC NO: DSAE6829 REV NO: V.4 DATE: MAY/13/2005 PAGE: 6 OF 6
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000795-01
PACKING & LABEL SPECIFICATIONS APBA3010ESGC-F01
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical
accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
