EDB101S THRU EDB106S GLASS PASSIVATED SUPER FAST SILICON SURFACE MOUNT BRIDGE RECTIFIER VOLTAGE RANGE 50 to 400 Volts CURRENT 1.0 Ampere FEATURES * * * * * * * Surge overload rating - 40 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded Glass passivated device Polarity symbols molded on body Mounting position: Any Weight: 1.0 gram DB-S .310 (7.9) .290 (7.4) MECHANICAL DATA .255 (6.5) .245 (6.2) * Epoxy: Device has UL flammability classification 94V-O .009 (0.229) .013 (.330) .003 (.076) .410 (10.4) .360 (9.4) .042 (1.1) .038 (1.0) .060 (1.524) .040 (1.016) .346 (8.8) 0.135 (3.4) .307 (7.8) 0.115 (2.9) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .205 (5.2) Single phase, half wave, 60 Hz, resistive or inductive load. .195 (5.0) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25oC unless otherwise noted) SYMBOL EDB101S Maximum Recurrent Peak Reverse Voltage RATINGS VRRM 50 Maximum RMS Bridge Input Voltage VRMS Maximum DC Blocking Voltage VDC Maximum Average Forward Output Current at T A = 55 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 3) Typical Junction Capacitance (Note 2) EDB102S EDB103S EDB104S 100 150 35 70 105 140 50 100 150 200 EDB105S EDB106S 300 UNITS 400 Volts 210 280 Volts 300 400 Volts IO 1.0 Amps I FSM 30 Amps R qJA 38 RqJL 12 CJ 15 0 C/W pF 10 -55 to + 150 T J, T STG Operating and Storage Temperature Range 200 0 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS SYMBOL VF Maximum Forward Voltage at 1.0A DC o Maximum Reverse Current at Rated @T A = 25 C DC Blocking Voltage per element @T A = 100 o C Maximum Reverse Recovery Time (Note 1) Note: 1.Test Conditions: I F=0.5A,I R=-1.0A,I RR=-0.25A. 2.Measured at 1MHz and applied reverse voltage of 4.0 volts. 3.Thermal Resistance : Mounted on PCB. IR trr EDB101S EDB102S EDB103S EDB104S 1.05 EDB105S EDB106S 1.35 UNITS Volts 5.0 uAmps 100 uAmps 50 nSec 2007-08 RATING AND CHARACTERISTICS CURVES ( EDB101S THRU EDB106S ) 50 W NONINDUCTIVE (+) 25 Vdc (approx) (-) (-) D.U.T PULSE GENERATOR (NOTE 2) 1 NONINDUCTIVE trr +0.5A 10 W NONINDUCTIVE OSCILLOSCOPE (NOTE 1) 0 -0.25A (+) NOTES: 1 Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF. -1.0A 2. Rise Time = 10ns max. Source Impedance = 50 ohms. 1cm SET TIME BASE FOR 20/1 ns/cm 2.0 1.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0 0 25 50 75 100 125 150 LEAD TEMPERATURE, (OC) FIG.2 TYPICAL FORWARD CURRENT DERATING CURVE 175 INSTANTANEOUS REVERSE CURRENT, (uA) AVERAGE FORWARD CURRENT, (A) FIG.1 TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 1000 100 TA = 100 OC TA = 75 OC 10 TA = 25 OC 1.0 0.1 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.3 TYPICAL REVERSE CHARACTERISTICS 140 TJ = 25 C 06 S O S~ 05 B1 B1 01 S~ 1.0 ED ED B1 04 S ED B1 10 0.1 Pulse Width=300mS 1% Duty Cycle 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 8.3ms Single Half Sine-Wave (JEDED Method) 30 25 20 15 10 5 0 3.6 1 2 INSTANTANEOUS FORWARD VOLTAGE, (V) 5 10 100 60 40 EDB101S~ED 10 2 1 B104S EDB105S~EDB106S 6 4 TJ = 25 OC 0.1 0.2 50 100 FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 200 20 20 NUMBER OF CYCLES AT 60Hz FIG.4 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS JUNCTION CAPACITANCE, (pF) 0.01 35 PEAK FORWARD SURGE CURRENT, (A) 100 ED INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( EDB101S THRU EDB106S ) 0.4 1.0 2 4 10 20 40 REVERSE VOLTAGE, (V) FIG.6 TYPICAL JUNCTION CAPACITANCE 100 Mounting Pad Layout .410 Max. (10.4 Max.) .205 (5.2) .195 (5.0) .042 Min. (1.10 Min.) Dimensions in inches and (millimeters) .060 Min. (1.52 Min.) DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Rectron: EDB104S-T EDB103S-T EDB103S-T-T EDB104S-T-T EDB106S-T EDB102S-T EDB101S-T EDB106S EDB105S-T EDB103S EDB104S EDB105S