GLASS PASSIVATED SUPER FAST
SILICON SURFACE MOUNT BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 400 Volts CURRENT 1.0 Ampere
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
EDB101S
THRU
EDB106S
DB-S
Dimensions in inches and (millimeters)
FEATURES
* Surge overload rating - 40 amperes peak
* Ideal for printed circuit board
* Reliable low cost construction utilizing molded
* Glass passivated device
* Polarity symbols molded on body
* Mounting position: Any
* Weight: 1.0 gram
* Epoxy: Device has UL flammability classification 94V-O
MECHANICAL DATA
0.115 (2.9)
0.135 (3.4)
.255 (6.5)
.310 (7.9)
.290 (7.4)
.245 (6.2)
.042 (1.1)
.038 (1.0)
.013 (.330)
.009
.003 (.076)
.410 (10.4)
.060 (1.524)
.040 (1.016)
.360 (9.4)
(0.229)
.346 (8.8)
.307 (7.8)
.195 (5.0)
.205 (5.2)
MAXIMUM RATINGS
(At T
A
= 25
o
C unless otherwise noted)
ELECTRICAL CHARACTERISTICS
(At T
A
= 25
o
C unless otherwise noted)
2007-08
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Operating and Storage Temperature Range
SYMBOL
V
RRM
V
DC
I
O
I
FSM
T
J,
T
STG
V
RMS
Volts
Volts
Amps1.0
30
-55 to + 150
0
C
pF
UNITS
Maximum Average Forward Output Current at T
A
= 55
o
C
50 150 200100 300 400
35 105 14070 210 280
Volts
Amps
EDB101S EDB103S EDB104SEDB102S EDB105S EDB106S
EDB101S EDB103S EDB104SEDB102S EDB105S EDB106S
50 150 200100 300 400
DC Blocking Voltage per element
CHARACTERISTICS
V
trr
F
SYMBOL
I
R
UNITS
1.05 1.35
100 uAmps
nSec
uAmps
at 1.0A DCMaximum Forward Voltage
Maximum Reverse Recovery Time (Note 1)
Volts
@T
A
= 25
o
C
@T
A
= 100
o
C
5.0
Rq
JA
0
C/W
Rq
JL
Typical Thermal Resistance (Note 3)
Note: 1.Test Conditions: IF=0.5A,IR=-1.0A,IRR=-0.25A.
2.Measured at 1MHz and applied reverse voltage of 4.0 volts.
3.Thermal Resistance : Mounted on PCB.
38
12
50
C
J
Typical Junction Capacitance (Note 2) 15 10
Maximum Reverse Current at Rated
LEAD TEMPERATURE, (OC)
INSTANTANEOUS REVERSE CURRENT, (uA)
25
00
1.0
2.0
7550 175100 125 150
RATING AND CHARACTERISTICS CURVES ( EDB101S THRU EDB106S )
FIG.2 TYPICAL FORWARD CURRENT
DERATING CURVE
FIG.1 TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
AVERAGE FORWARD CURRENT, (A)
0
1.0
0.1
100
1000
10
6020 40 80 100 120 140
FIG.3 TYPICAL REVERSE
CHARACTERISTICS
trr
+0.5A
50 W
NONINDUCTIVE
10 W
NONINDUCTIVE
0
-0.25A
-1.0A
1cm
SET TIME BASE FOR 20/1 ns/cm
NOTES:
1 Rise Time = 7ns max. Input Impedance =
1 megohm. 22pF.
2. Rise Time = 10ns max. Source Impedance =
50 ohms.
D.U.T
25 Vdc
(approx)
( - )
( - )
( + )
( + )
1
NON-
INDUCTIVE
OSCILLOSCOPE
(NOTE 1)
PULSE
GENERATOR
(NOTE 2)
Single Phase
Half Wave 60Hz
Resistive or
Inductive Load
T
A
= 25 OC
T
A
= 100 OC
T
A
= 75 OC
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT, (A)
INSTANTANEOUS FORWARD VOLTAGE, (V)
1
0
20
15
10
5
25
30
35
INSTANTANEOUS FORWARD CURRENT, (A)
1.0
0.1
0.01
10
100
10 2052 50 100
2.8 3.2 3.62.42.01.61.20.80 0.4
RATING AND CHARACTERISTICS CURVES ( EDB101S THRU EDB106S )
FIG.4 TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
FIG.5 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
REVERSE VOLTAGE, (V)
JUNCTION CAPACITANCE, (pF)
4
6
40
20
10
60
200
100
0.20.1
2
10.4 21.0 4 10 20 40 100
FIG.6 TYPICAL JUNCTION CAPACITANCE
8.3ms Single Half Sine-Wave
(JEDED Method)
T
J
= 25 OC
Pulse Width=300mS
1% Duty Cycle
EDB101S~EDB104S
EDB105S~EDB106S
T
J
= 25
O
C
EDB101S~EDB104S
EDB105S~EDB106S
Mounting Pad Layout
Dimensions in inches and (millimeters)
.410 Max.
(10.4 Max.)
.042 Min.
(1.10 Min.)
.060 Min.
(1.52 Min.)
.205 (5.2)
.195 (5.0)
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
DISCLAIMER NOTICE
