LBWA17DZX6-705 - MURATA MANUFACTURING

Shaping the future of

Healthcare & medical

Latest technologies for all healthcare and medical applications

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 1 04/11/2015 10:03:30

Products for healthcare

Contents

Electronics

in healthcare

Electronics are permeating more and more into

the healthcare sector, and electronics technology

advances continue to enhance the functionality of

healthcare equipment.

Murata is at the cutting edge of these electronics

advancements and is a key provider of technologies which will

help to shape the future of healthcare around the world.

Apart from our standard products, which are present in almost

any electronic equipment you use, Murata has developed new,

innovative products speciﬁcally for healthcare applications.

In this brochure we outline just a few of these innovations.

Please note that Murata does not support

the usage of Murata’s standard products

for safety-critical applications that require

especially high reliability.

Please don’t hesitate to contact us if you

have any questions or concerns.

Contents:

Sensors / Thermistor 4-5

Connectivity Modules 6-7

Power Supplies (AC-DC) 8

Power Devices (DC-DC) 9

Inductors 10

Capacitors & EMI Noise Suppression 11

Timing devices 13

Sound Components (Piezoeletrics) 14

My Murata 15

BCG (Ballistocardiography) node

Size 8.37cm x 4.07cm x 1.76cm

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 2 04/11/2015 10:03:51

Block diagram

MEMS BCG moduleHeart rate, respiration rate &

bed occupancy

A/D I/F

u-controller for

signal processing

SCA61T

Accelerometer

Power management

UART

Wiﬁ enabled

Acceleration Sensor

Raw Signal

BCG Device

MEMS HR sensor node

Non-contact heart rate and other

cardiac measurement parameters

Electronic BCG (Ballistocardiography) module with

accelerometer signal processing and algorithm in the

on-board micro controller

Learn about MEMS sensors

http://www.murata.com/en-eu/products/

sensor

Features

• A continuous contactless patient monitoring concept when in the bed

• Heart rate (HR), heart rate variability (HRV), respiration rate (RR) and bed

occupancy detection can be utilized to analyze for example stress and relaxation

index and sleep quality

• Opens new possibilities in patient monitoring and elderly care in hospitals, assisted

living and at home.

Beneﬁts

• Safety

• Eciency

• Responsiveness

Products for healthcare 3

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 3 04/11/2015 10:04:09

www.murata.com

Products for healthcare

Learn more online

http://www.murata.com/en-eu/products/

sensor

Sensors MEMS

Vertical Accelerometer Elements

SCG12S and SCG14S

• Size 3mm x 2.12mm x 1.95 or 1.25mm

• Various measuring ranges possible (1 - 12g)

• Proven capacitive 3D-MEMS Technology

Horizontal Accelerometer Elements

SCG10X and SCG10Z

• Size SCG10X: 2.55mm x 2.95mm x 1.91mm

• Size SCG10Z: 1.50mm x 1.70mm x 1.83mm

• Various measuring ranges possible (1 - 12g)

• Proven capacitive 3D-MEMS Technology

Pressure Sensor Elements

SCB10H

• Size 1.4mm x 1.4mm x 0.85mm

• High pressure shock survival (> 200 bar)

• Various pressure ranges possible (1.2 - 25 bar)

• Proven capacitive 3D-MEMS technology

• Operates at near vacuum applications

Sensor Elements (Dies)

Accelerometer

Digital 1-, 2- or 3-axis Accelerometers

• Excellent accuracy

• Excellent stability over temperature

• Ranges: ± 2g, ± 6g

Inclinometer

Analog 1- or 2-axis Inclinometers

• Excellent accuracy

• Excellent stability over temperature

• Ranges: ± 15 °, ± 30 °, ± 90 °

Gyroscope

1-axis Angular Rate Sensors

• Excellent accuracy

• Excellent stability and noise performance

• Ranges: ± 100 °/s , ± 300 °/s

Sensor Modules

MEMS sensors

High accuracy, low-power consumption

Medical sensors increase the intelligence

of life supporting devices, and they can be

used in new types of patient monitoring

applications that allow patients to lead

more independent lives. Detecting signals

triggered by symptoms helps optimize

medication and prevent serious attacks

of illness.

Murata’s unique MEMS design, which

combines single crystal silicon and

glass, ensures exceptional reliability,

unprecedented accuracy and excellent

stability over time. The power

requirements of these medical sensors

are extremely low, which gives them a

signiﬁcant advantage in small battery-

operated devices.

As the leading supplier of activity

sensors for pacemakers

Murata also oers a wide

range of pressure sensors,

accelerometers, inclinometers

and gyroscopes for various

demanding medical and healthcare

applications. Device developers and

manufacturers of many existing and

emerging healthcare applications have

been able to reach their power and size

requirements thanks to Murata’s MEMS

technology.

Murata is a leading supplier of acceleration, inclination and angular

motion sensor solutions for healthcare applications.

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 4 04/11/2015 10:04:15

Products for healthcare

www.murata.com 5

Sensors / Thermistors

NEW

Learn more online

http://www.murata.com/en-eu/products/

thermistor

Learn more online

http://www.murata.com/en-eu/products/

sensor

The tightest temperature toler-

ance chips and lead types covering

inrush current suppression, tem-

perature compensation, overcur-

rent and overheat sensing.

Thermistors Product lineup

PTC & NTC Thermistor

For overcurrent protection & temperature

sensor / temperature compensation

Chip NTC Thermistor

For temperature sensor / temperature

compensation

Chip PTC Thermistor Line-up

For overheat sensing / overcurrent

protection

PTC Thermistor lead type

Sensors

Sensor product lineup

Pyroelectric Infrared Sensors

Ultrasonic Sensors

Magnetic Pattern Recognition Sensors

Magnetic Switches (AMR Sensors)

Shock Sensors

Angular Rate Sensors

Rotary Position Sensors

MEMS Sensors

Low proﬁle, ﬂexible with

excellent responsiveness

Easily routed in complex designs the ﬂexible

ﬁlm temperate sensor is ideal for sensing housing

temperatures of compact devices as wearable healthcare

products, smartphone and tablets.

This range of surface-mounted NTC tem-

perature sensors are packaged on a ﬂex-

ible printed circuit (FPC) ﬁlm and measur-

ing at 50.00 x 3.17 x 0.55 mm in size. The

FTNT55XH103FA1A050 can measure

temperatures in the range of -40 to + 125

degrees C and has an accuracy, at 25 de-

grees C of +/- 0.4 degrees C. Resistance at

25 degrees C is 10 k ohm +/- 1%.

The ﬁlm temperature sensor has been

granted 4 patents including 1 basic pat-

ent and 3 peripheral patents.

Features

• FPC thickness approximately

100µm for easy wiring in complex

structures and tight spaces

• Equipped with low heat capacity

making thermal responsiveness

excellent

FTNT55XH103FA1A050

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 5 04/11/2015 10:04:23

www.murata.com

Products for healthcare

Connectivity modules

Product Murata P/N Chipset Processor WLAN Op. Temp Size (mm) Host Interface Antenna Cert. Grade

Type ZX LBWA17DZX6-705 Broadcom®

BCM43362 802.11b/g/n -40°C to +85°C 7.0 x 6.0 x 1.2 SDIO(Wi-Fi™) External No

Type 1FX LBWA1KL1FX-875 BCM43364 802.11b/g/n -20°C to +75°C 6.95 x 5.15

x 1.1 SDIO External No

Type YD

LBWA1ZVYDZ-679

(WICED SW)

Broadcom®

BCM43362

STM32 ARM®

Cortex®-M3 802.11b/g/n -40°C to +85°C 10.0 x 7.9 x

1.25 UART/SPI External Yes Consumer

LBWA1ZVYDZ-682

(Ayla SW)

LBWA1ZVYDZ-739

(Murata SW)

Type ZD LBWA1ZVZDZ-681 Broadcom®

BCM43362

STM32 ARM®

Cortex®-M4 802.11b/g/n -40°C to +85°C 10.0 x 7.9 x

1.25 UART/SPI External TBD Consumer

Type ZX LBWA17DZX6-705 Broadcom®

BCM43362 N/A 802.11b/g/n -40°C to +85°C 7.0 x 6.0 x 1.2 SDIO External No Consumer

Type YD-

Certiﬁed

LBWB1ZZYDZ-713

(WICED SW)

Broadcom®

BCM43362

STM32 ARM®

Cortex®-M3 802.11b/g/n -40°C to +85°C 33.0 x 18.0

x 2.5 UART/SPI(MCU) External Yes Consumer

LBWB1ZZYDZ-683

(Ayla SW)

LBWB1ZZYDZ-740

(Murata SW)

Wi-Fi™ 802.11b/g/n Murata WICED module portfolio

Healthcare devices are increasingly connected to each other and the web. Use a

Murata module for proven RF excellence.

Murata RF modules make it easy for you to build connectivity into most devices,

even those where space is limited and power consumption needs to stay low.

With BLE (Bluetooth® Low Energy) devices as small as 4.8 x 5.8 x 1.0mm, wireless

communication has never been easier to design in.

Connectivity modules

Low-power reliable connectivity

for healthcare devices

Small Size

Murata RF modules are small

enough to suit even the most

space-constrained applications

with sizes from 4.8 x 5.8 x

1.0mm.

Footprint

Height

Learn more online

http://wireless.murata.com/eng/products/

wireless-connectivity-platforms.html

Features

• Support BLE (Bluetooth® Low

Energy), Bluetooth®, WiFi®, and

other wireless standards

• Combo-modules available

(Bluetooth®/WiFi®, etc.)

• Easy to design in

• Antenna matching supported

Applications

• E-health / home monitoring

• Connectivity of healthcare

appliances like blood pressure

meter, glucose meter, etc.

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 6 04/11/2015 10:04:43

Products for healthcare

www.murata.com 7

Connectivity modules

Product Murata P/N Chipset Processor WLAN Op. Temp Size (mm) Host Interface Antenna Cert. Grade

SN8000

88-00153-00 Broadcom®

BCM43362 N/A 802.11b/g/n -40°C to +85°C 24.0 x 11.4

x 1.9 SDIO/SPI On Board or

U.FL Connector Yes Industrial

88-00153-02

SN820X

88-00158-00 Broadcom®

BCM43362

STM32 ARM®

Cortex®-M3 802.11b/g/n -40°C to +85°C 30.5 x 19.4

x 2.8 UART/SPI On Board or

U.FL Connector Yes Industrial

88-00158-02

Wi-Fi™ - Broadcom® chip set 2.4GHz IEEE 802.11b/g/n radio technology

Product Murata P/N Chipset WLAN BT Clock Op. Temp Size (mm) Host Interface Antenna Cert.

Type ZP LBEH5HMZPC BCM4339 802.11

a/b/g/n,ac BT®+BLE®X'tal -20°C to

+75°C 7.8 x 7.42 x 1.0 SDIO(Wi-Fi™),

UART(BT®)External No

Type 1BW LBEH5DU1BW Broadcom®

BCM43340 802.11 a/b/g/n BT®+BLE®X'tal 8.0 x 7.5 x 1.33 SDIO(Wi-Fi™) External No

Type 1DX LBEE5KL1DX-875 802.11b/g/n EDR & BLE®

v4.1

-20°C to

+75°C 6.95 x 5.15 x 1.1 SDIO External Yes

Type XR LBEP5CLXRC-701 TI WiLink™ 8

WL1801 802.11b/g/n No External -40°C to

+85°C 9.9 x 8.8 x 1.3 SDIO(Wi-Fi™) External No

Type WT

LBEP5CLWTC-601

(WLAN Only) TI WiLink™ 8

WL1831 802.11b/g/n v4.0

(BLE®+EDR) Internal X'tal -40°C to

+85°C 9.9 x 8.8 x 1.3 SDIO(Wi-Fi™),

UART(BT®)External No

LBEP5CLWTC-631

(WLAN + BT + BLE)

Type WM

LBEP5CLWMC-603

(WLAN Only) TI WiLink™ 8

WL1833 802.11a/b/g/n

v4.0

(BLE®+EDR) Internal X'tal -40°C to

+85°C 9.9 x 8.8 x 1.3 SDIO(Wi-Fi™),

UART(BT®)External No

LBEP5CLWMC-633

(WLAN + BT + BLE)

Wi-Fi™ 802.11a/b/g/n with Bluetooth 4.0™ for Linux™ & Android platforms

Product Freq Murata P/N Power Class Version Output Power Op. Temp Size (mm) Host Interface Antenna Cert.

Type VZ 2.4GHz

LBCA2ZZVZZ-721

(Central Device) Class 3 BLE®-2dBm -10°C to +60°C 20.0 x 13.0 x 24 UART On Board Yes

LBCA2ZZVZZ-722

(Peripheral Device)

Type WS 2.4GHz

LBCA2ZXWSE-723

(Central Device) Class 3 BLE®-2dBm -10°C to +60°C 10.4 x 7.7 x 1.8 UART External Yes

LBCA2ZXWSE-724

(Peripheral Device)

Type ZF 2.4GHz LBCA2BZZFZ Class 3 BLE® v4.1 0dBm -20°C to +85°C 5.4 x 4.4 x 1.0 UART External No

Type ZY 2.4GHz LBCA2HNZYZ-711 Class 3 BLE® v4.1 0dBm -20°C to +85°C 7.4 x 7.0 x 1.0 UART Internal Yes

Type 1BX 2.4GHz LBMA15Q1BX Class 1 BT®+BLE®13dBm (Max) -30°C to +85°C 5.0 x 4.5 x 1.0 UART External No

Bluetooth SMART® modules

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 7 04/11/2015 10:04:46

www.murata.com

Products for healthcare

Power supplies AC-DC

2”x4”

Series Convection

Cooling

Forced Air

250LFM

Input Voltage

(Vac)

Output

Voltage (V) Eciency

MVAC400 250W 400W 90-264 12V/24V/50V 93%

MVAC250 170W 250W 90-264 12V/24V/50V 93%

MVAD160 110W 160W 90-264 12V/24V/48V 93%

MVAB120 75W 120W 90-264 12V/24V/28V/48V 91%

MVAD065 65W 65W 90-264 12V/24V/48V 90%

MVAD040 40W 40W 90-264 12V/24V/48V 89%

PLUS®

GOLD

3”x5”

NEW

AC-DC front-end

power supplies

Medical approved

MVAC Series

MVAD160 Series

MVAD Series

400W

250W 40W 120W

160W

65W

Features

• Universal input 90-264Vac

• Active power-factor correction

• Up to 250W natural convection cooling

• -20°C to +70°C full power operating

temp.

• Class B conducted EMC

• Aux isolated 12V@1A fan output

• MVAC 250/400: 10W 5V standby power

• MVAD040/065: less than 0.3W at no load

• 2 x MOPP (Primary-Secondary)

• 1 x MOPP (Secondary-Chassis/Earth

Enclosure

Quality/Safety

• 60601 (3rd edition) MOPP, 60950

safety approval

• 2 year warranty

Applications

• Mains-powered medical equipment

Selection table

Learn more online

http://power.murata.com/en/products/ac-

dc-power-supplies.html

Custom products also available for medical applications

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 8 04/11/2015 10:04:52

Products for healthcare

www.murata.com 9

NEW

DC-DC Power devices

Selection table

Conﬁgurations

Series Isolation Input voltage Output voltage Eciency Power

rating

MEJ1 5200Vdc 3.3/5/12/15/24V 3.3/5/9/12/15V 69-78% 1W

MEJ2 5200Vdc 3.3/5/12/15V 3.3/5/9/12/15V 70-82% 2W

Function IGBT SIC MOSFET

15V Output +15V +20V +15V

15V (0V reference) 5VA output 0V 0V

15VA (0V reference) 5VB output 0V -5V

5VB (0V reference) -10V -5V

NEW

Output 1 Output 2 Output 3

Rated Output

Voltage (V)

Rated Output

Current (mA)

Output Power

(W)

Rated Output

Voltage (V)

Rated Output

Current (mA)

Output Power

(W)

Rated Output

Voltage (V)

Rated Output

Current (mA)

Output Power

(W)

MGJ3T05150505MC 15 120 1.8 5 120 0.6 5 120 0.6

MGJ3T12150505MC 15 120 1.8 5 120 0.6 5 120 0.6

MGJ3T24150505MC 15 120 1.8 5 120 0.6 5 120 0.6

MGJ6T05150505MC 15 240 3.6 5 240 1.2 5 240 1.2

MGJ6T12150505MC 15 240 3.6 5 240 1.2 5 240 1.2

MGJ6T24150505MC 15 240 3.6 5 240 1.2 5 240 1.2

DC-DC converters

Low power modules

Selection table

Compact 1W & 2W DC-DC converter

complies with UL60601-1

Conﬁgurable output voltage, high isolation DC-DC converters

Industry standard, pin compatible 1W

and 2W converters maintaining high

levels of eciency at light loads.

Learn more online

http://power.murata.com/en/products/

dc-dc-converters.html

MGJ3 & MGJ6

MEJ1 & MEJ2

Features

• High eciency across the full load range

• Op. temp. range: -40º to 85º

• Encapsulated: superior thermal performance

• 72-79% typical eciency

• 3.5 - 5% typical load regulation

• ANSI AAMI ES60601-1 recognition

• UL60950

Features

• 3 outputs conﬁgurable for all gate drive applications:

+15V/-5V, +15V/-10V & +20V/-5V outputs

• ANSI/AAMI ES60601-1 pending

• Reinforced insulation to UL60950 pending

• Characterised dv/dt immunity

• Characterised partial discharge immunity

• Ultra-low coupling capacitance 15pF

• Operation to 105°C

With conﬁgurable triple output voltages of +15V, +5V and +5V, the

MGJ series of DC-DC converters is ideal for powering gate drives for

IGBTs and Mosfets (standard, SiC) in bridge circuits . The MGJ series is

characterised for high isolation and common mode dv/dt requirements.

A disable/frequency synchronisation pin simpliﬁes EMC ﬁlter design.

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 9 04/11/2015 10:05:03

www.murata.com

Products for healthcare

Inductors

Product line-up

Inductors/Common Mode Chokes

• AC and DC Powerline ﬁltering

• Magnetically shielded inductors for EMI

sensitive applications

• Energy storage in power converters

Transformers

• Pulse

• Current sense

Product line-up

Inductors for Power Circuits

(Power and Choke)

RF Inductors

Murata chip inductors feature

compact size and high-perfor-

mance. The unique coil and case

structures give them low DC

resistance and outstanding high-

frequency characteristics.

Murata oers a broad variety of products

for dierent applications.

The diverse lineup oers the customer

a choice of the types of inductors and

characteristics optimal for the circuit in

question.

Inductors are passive components

and are required in all noise-sensi-

tive electronic power circuits. Mag-

netic inductors are not restricted

by application.

Whether you need to reduce noise or

protect vital components, we can oer

a wide range of products to suit your

requirements, having developed over

1,200 highly advanced and optimized

inductor and transformer solutions. With

an emphasis on miniaturization, reliability

and ease of handling, our inductors,

current transformers and common mode

chokes are available in a variety of styles

including bobbin, radial, axial and surface

mount.

Power inductors

Learn more online

http://www.murata-ps.com/en/products/

magnetics.html

Learn more online

http://www.murata.com/en-eu/products/

inductor

Power inductors

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 10 04/11/2015 10:05:11

Products for healthcare

www.murata.com 11

EMI Noise suppression / Capacitor

Learn more online

http://www.murata.com/en-eu/products/

emc

Product line-up

EMI Suppression Filters

Microwave Absober

AC Line Filter

ESD Protection Devices

Ferrite Core

EMI Noise suppression

Using Murata's ceramic processing

technology and unique material, we

oer a variety of Noise Suppression

Products and EMI Suppression Filters.

Murata also oers technical support

and guidance based on many years

of experience operating in the ﬁeld

of noise suppression.

Capacitors

Murata oers the No. 1 most

abundant lineup in the industry, re-

sponding to all possible needs, and

proposing ideal solutions.

Continuing to evolve as the world's

No.1 manufacturer of monolithic

ceramic capacitor

Learn more online

http://www.murata.com/en-eu/products/

capacitor

Product line-up

Monolithic ceramic capacitors

High voltage capacitors

PAC (Polymer aluminum electrolytic capacitors)

Film capacitors

EDLC (Electrical double layer capacitors)

Safety capacitors

Trimmer capacitors

Single layer microchip capacitor

EDLC, GRM, ZRB, TZC3

EMI suppression ﬁlters

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 11 04/11/2015 10:05:18

www.murata.com

Products for healthcare

Murata Crystal Unit

Ceramic Plate

Crystal Element

Metal Cap

Metal or Ceramic Plate

Ceramic Cavity

Conventional Crystal Unit

Crystal Element

Murata Crystal Unit

Ceramic Plate

Crystal Element

Metal Cap

Metal or Ceramic Plate

Ceramic Cavity

Conventional Crystal Unit

Crystal Element

Timing devices

Timing Devices

Ceramic resonators (CERALOCK®)

are made of high stability piezo-

electric ceramics that function as a

mechanical resonator.

With the advance of the IC tech-

nology, various equipment may be

controlled by a single LSI integrated

circuit, such as the one-chip micro-

processor.

Learn more online

http://www.murata.com/en-eu/products/

timingdevice

Product line-up

Ceramic resonators

Ceramic ﬁlters

Crystal units

Crystal oscillators

Piezoelectric sound components

Since 2009, Murata‘s crystal unit has oered a compelling balance

of value and accuracy, in an innovative 2016 package. Such features

are ideal for size and cost conscience consumer, and communication

applications.

Small size

• 2016* size for 24MHz to 48MHz

• 2520* size for 16MHz to 24MHz

*2016 = 2.0mm x 1.6mm package size

*2520 = 2.5mm x 2.0mm package size

Frequency Tolerance

• Available +/-20ppm* for Consumer

• Available +/-100ppm* for Automotive

Economical & robust design

• Simple structure using Murata’s

proven package technology

• Particle screening process for

enhanced reliability

RoHS Compliant & Pb Free

Features

Learn more online

http://www.murata.com/en-eu/products/

timingdevice/crystalu

Crystal units

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 12 04/11/2015 10:05:20

Products for healthcare

www.murata.com 13

Sound components

PKMCS0909E4000-R1

9mm

Speciﬁcations

Sound pressure level 65dB min

Measure condition of sound pressure level ±1.5 Vo-p, 4.0kHz, square wave, 10cm

Maximum input voltage ±12.5Vo-p max

Operating temperature range -40 to +85ºC

Storage temperature range -40 to +85ºC

Drive type External-drive

Conditions: 10cm, A-ﬁlter

Frequency (kHz)

0 2 4 6 8 10

NEW

Piezoelectric sound components utilize natural oscillation

of piezoelectric ceramics. They are widely used in the

applications from healthcare to consumer products.

Features

• Small, thin and lightweight

• 9.0mm x 9.0mm x 1.9mm

- 44% reduction of its predecessor

• Low power consumption 6.0Mv

• Noiseless - piezo base enables minimum

impact on surrounding circuitry by not

getting any electrical noise

Applications

• Healthcare: Blood glucose meters,

thermometers, etc.

• Consumer: Remote controls, mobile

printers, digital cameras, etc.

Sound components

Ultra compact light and low power SMD

piezoelectric sounder suits portable

healthcare devices

The smallest and lightest surface mount piezoelectric

sounder available. Occupying signiﬁcantly less surface

area, and with a combined weight and area reduction of

44% compared to other similar products.

Frequency Characteristics of Sound Pressure Level

Learn more online

http://www.murata.com/en-eu/

products/sound

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 13 04/11/2015 10:06:36

www.murata.com

Products for healthcare

RFID

Construction

Resin

cover

LTCC Substrate

containing RF circuitry

UHF RFID IC

Features

• RF circuitry incorporated in LTCC

substrate

• Read range:

- Up to 2cm using the component

alone*

- Up to 7m with external antenna

• Can be mounted on many surfaces

• Can be embedded into many materials

• Small SMD: 2.0 x 1.2 (LXMS21) and

3.2 x 1.6 (LXMS31)

• Complies with EPCglobal C1G2, ISO

18000-6C

*Loop type antenna for reader/writer is required

Applications

• Anti-counterfeit

• Process control/traceability of medical

electronics

• Tracking/tracing PCBs

• Inventory management in healthcare

institutions

• Probe tracking

Small Size

2.0 x 1.2 (LXMS21) or

3.2 x 1.6 (LXMS31),

surface-mounted device

Track, trace, & verify

with ultra-miniature UHF RFID tags

Whether your focus is on anti-counterfeiting, inventory management, or

process control, MAGICSTRAP® oers you an integrated solution with a tag

size which can meet the challenges of almost any application.

At only 2.0 x 1.2 (LXMS21) and 3.2 x 1.6 (LXMS31), the MAGICSTRAP® UHF IC

module is one of the smallest in the world. It can be mounted onto, or embedded

into, a wide variety of materials even in non-electronic products, and can be surface-

mounted directly onto your PCB for use in medical electronics.

In association with partner companies oering hardware & soware solutions, we

are able to provide a fully integrated system that gives you massive read/write

functionality all built around an unbelievably small module.

Learn more online

http://www.murata.com/en-eu/products/

rﬁd

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 14 04/11/2015 10:06:42

www.murata.com 15

Design tools

my Murata

Find what you need, when you need it

The new ‘my Murata’ portal is designed to respond to your

individual needs. This space acts as a conference room in which

you and Murata can meet.

Focused on products and solutions, this service provides you with

the information you need - quickly. Our aim is to make you will

feel like you have a Murata salesman or engineer at your side.

Get the latest product information

You can ﬁnd out about the latest ceramic capacitor product lines,

updated regularly as well as some unreleased product information,

exclusively available on ‘my Murata’. Plus much more...

‘my Murata’ knowledge exchange

To get feedback from the engineering community post

your questions onto the ‘Forum’ which is provided to allow

customers with similar experiences to exchange ideas and

knowledge through discussions with Murata engineers.

Find product speciﬁcations, mounting know-how, noise

suppressions solutions, plus much more...

Enhanced design tool

Simulate the characteristics of Murata products using the

enhanced version of our ‘SimSurﬁng’ soware available on

the ‘my Murata’ portal.

New Murata web service

registration only portal site

Get your login credentials at:

https://my.murata.com/en/

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 15 04/11/2015 10:06:49

Cat. No. HC15_4

Healthcare

HC15_4

Murata Manufacturing Co., Ltd.

www.murata.com

Global locations

For details please visit www.murata.com

1 Export Control

For customers outside Japan:

No Murata products should be used or

sold, through any channels, for use in the

design, development, production, utilization,

maintenance or operation of, or otherwise

contribution to (1) any weapons (Weapons of

Mass Destruction [nuclear, chemical or biological

weapons or missiles] or conventional weapons)

or (2) goods or systems specially designed or

intended for military end-use or utilization by

military end-users.

For customers in Japan:

For products which are controlled items subject

to the “Foreign Exchange and Foreign Trade Law”

of Japan, the export license speciﬁed by the law

is required for export.

2 Please contact our sales representatives or

product engineers before using the products in

this catalog for the applications listed below,

which require especially high reliability for the

prevention of defects which might directly

damage a third party’s life, body or property, or

when one of our products is intended for use

in applications other than those specified in

this catalog.

1 Aircra equipment

2 Aerospace equipment

3 Undersea equipment

4 Power plant equipment

5 Medical equipment

6 Transportation equipment (vehicles, trains,

ships, etc.)

7 Trac signal equipment

8 Disaster prevention / crime prevention

equipment

9 Data-processing equipment

10 Application of similar complexity and/or

reliability requirements to the applications

listed above

3 Product

speciﬁ cations in this catalog are as

of March 2014. They are subject to change or

our products in it may be discontinued without

advance notice. Please check with our sales

representatives or product engineers before

ordering. If there are any questions, please contact

our sales representatives or product engineers.

4 Please read rating and CAUTION (for storage,

operating, rating, soldering, mounting and

handling) in this catalog to prevent smoking

and/or burning, etc.

5 This catalog has only typical speciﬁcations.

Therefore, please approve our product

speciﬁcations or transact the approval sheet

for product speciﬁcations before ordering.

6 Please note that unless otherwise speciﬁed, we

shall assume no responsibility whatsoever for any

conﬂict or dispute that may occur in connection

with the eect of our and/or a third party’s

intellectual property rights and other related

rights in consideration of your use of our products

and/or information described or contained in our

catalogs. In this connection, no representation

shall be made to the eect that any third parties

are authorized to use the rights mentioned above

under licenses without our consent.

7 No ozone depleting substances (ODS) under the

Montreal Protocol are used in our manufacturing

process.

Note

HealthCare_Brochure_NEWDESIGN_Rev6.3.indd 16 04/11/2015 10:06:49