225
The Important Information/Disclaimer is incorporated in the catalog where these specications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
F38 Series
Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors
F38 Series – Miniature - Undertab
102220
FEATURES
• Conductive Polymer Electrode
• Benign Failure Mode Under Recommended Use Conditions
• Compliant to the RoHS3 directive 2015/863/EU
• SMD Facedown
• Small and Low Prole
• High Volumetric Eciency
• 100% Surge Current Tested
APPLICATIONS
• Smartphone
• Tablet PC
• Wireless Module
• Portable Game
millimeters (inches)
LEAD-FREE COMPATIBLE
COMPONENT
CASE DIMENSIONS:
Code EIA Code EIA Metric L W1W2H S1S2
M0603 1608-09 1.60
(0.063 )
0.85
(0.033 )
0.65±0.10
(0.026±0.004)
0.80±0.10*1
(0.031±0.004)
0.50±0.10
(0.020±0.004)
0.60±0.10
(0.024±0.004)
S0805 2012- 09 2.00
(0.079 )
1.25
(0.049 )
0.90±0.10
(0.035±0.004)
0.80±0.10
(0.031±0.004)
0.50±0.10
(0.020±0.004)
1.00±0.10
(0.039±0.004)
U0402 1106-06 1.10± 0.05
(0.043±0.002)
0.60±0.05
(0.024±0.002)
0.35±0.05
(0.014±0.002)
0.55±0.05
(0.022±0.002)
0.30±0.05
(0.012±0.002)
0.50±0.05
(0.020±0.002)
*1 F380J476MMAAXE: 1.0mm Max.
F38
Type
1A
Rated
Voltage
225
Capacitance
Code
pF code: 1st two digits
represent signicant gures,
3rd digit represents multiplier
(number of zeros to follow)
M
Tolerance
M=±20%
M
Case
Size
See
table
above
TECHNICAL SPECIFICATIONS
Category Temperature Range: -55 to +105°C
Rated Range: +85°C or +60°C (*2)
Capacitance Tolerance: ±20% at 120Hz
Dissipation Factor: Refer to next page (120Hz)
ESR 100kHz: Refer to next page (120Hz)
Leaking Current: Refer to next page
At 20ºC after application of rated voltage for 5 minutes
Provided that:
After 5 minute’s application of rated voltage, leakage current at 105°C
10 times or less than 20ºC specied value.
Termination Finish: M, S case: Gold Plating (standard), U case: Sn-3.5Ag Plating (standard)
*2 LZT and AXE: Rated temperature +60°C, Surge and Endurance test temperature +60°C
+0.20
-0.10
+0.20
-0.10
+0.20
-0.10
+0.20
-0.10
+0.008
-0.004
+0.008
-0.004
+0.008
-0.004
+0.008
-0.004
HOW TO ORDER
MARKING
U CASE M CASE S CASE
L
H
W1
W2
S1
S2
S1
*Capacitance
Code
AJ s
Rated Voltage
Code Rated Voltage
Code
Packaging
Reel Dia
(φ180)
Tape Width
(mm)
A 8
Special Code
AXE = Rated temperature 60°C and H
dimension 1.0mm Max.
AXEH3 = Rated temperature 60°C and H
dimension 1.0mm Max., Low ESR
LZT = Rated temperature 60°C
LZTH1 = Rated temperature 60°C, Low ESR
AH1, AH2, AH3 = Low ESR
• Bulk Decoupling of SoC
(System on Chip)
226 The Important Information/Disclaimer is incorporated in the catalog where these specications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
F38 Series
Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors
CAPACITANCE AND RATED VOLTAGE RANGE
(LETTER DENOTES CASE SIZE)
Capacitance Rated Voltage *Cap
Code
μF Code 4V (0G) 6.3V (0J) 8V (0K) 10V (1A) 25V (1E)
1.0 105 U A
2.2 225 M M J
4.7 475 UM/S S S
10 106 M/M(AH1,AH2)/S/U M/M(AH1)/S a
22 226 M/M(AH3,AH1)/S/S(AH1) M*4/S j
33 336 M**/S S** n
47 476 M*4/M*4(H3)/S/S(AH1) SS** s
68 686 S** w
100 107 S** S**/S**(H1) A
Released ratings, (Low ESR)
*4 (AXE) Rated temperature 60ºC and H dimension 1.0mm Max. Please contact AVX when you need detail spec.
** (LZT) Rated temperature 60ºC. Please contact AVX when you need detail spec.
Please contact to your local AVX sales oce when these series are being designed in your application.
THE CORRELATIONS AMONG
RATED VOLTAGE, SURGE VOLTAGE
AND DERATED VOLTAGE
F38 (Standard)
Rated Voltage (V) ≤85°C 6.3 810 25
85°C Surge Voltage (V) 8 10 13 32
105°C Derated Voltage (V) 5 6.3 820
Item All Case (%)
Damp Heat, steady state -20 to +30
Rapid change of temperature ±20
Resistance soldering heat ±20
Surge ±20
Endurance ±20
RATINGS & PART NUMBER REFERENCE
AVX Part No. Case
Size
Capacitance
(µF)
Rated Voltage
(V)
DCL
(µA)
DF
@ 120Hz
(%)
ESR
@ 100kHz
(mΩ)
100kHz RMS Current (mA) *3
ΔC/C
(%)
MSL
45°C 60°C 85°C 105°C
4 Volt
F380G107MSALZT S100 480.0 10 200 474 332 –237 * 3
6.3 Volt
F380J105MUA U 1 6.3 0.6 61500 100 –70 50 * 3
F380J475MUA U4.7 6.3 20.0 10 1500 100 –70 50 * 3
F380J106MMA M10 6.3 10.0 8500 224 –157 112 * 3
F380J106MMAAH1 M10 6.3 10.0 8300 289 –202 144 * 3
F380J106MMAAH2 M10 6.3 10.0 8200 354 –247 177 * 3
F380J106MSA S10 6.3 6.3 10 250 424 –297 212 * 3
F380J106MUA U10 6.3 20.0 10 1500 100 –70 50 * 3
F380J226MMA M22 6.3 13.9 10 500 224 –157 112 * 3
F380J226MMAAH3 M22 6.3 13.9 10 300 289 –202 144 * 3
F380J226MMAAH1 M22 6.3 13.9 10 200 354 –247 177 * 3
F380J226MSA S22 6.3 13.9 10 200 474 –332 237 * 3
F380J226MSAAH1 S22 6.3 13.9 10 150 548 –383 274 * 3
F380J336MMALZT M33 6.3 41.6 10 500 224 157 –112 * 3
F380J336MSA S33 6.3 20.8 10 200 474 –332 237 * 3
F380J476MMAAXE M47 6.3 59.2 10 500 224 157 –112 * 3
F380J476MMAAXEH3 M47 6.3 59.2 10 300 289 202 –144 * 3
F380J476MSA S47 6.3 29.6 10 200 474 –332 237 * 3
F380J476MSAAH1 S47 6.3 29.6 10 150 548 –383 274 * 3
F380J686MSALZT S68 6.3 86.0 10 200 474 332 –237 * 3
F380J107MSALZT S100 6.3 126.0 10 200 474 332 –237 * 3
F380J107MSALZTH1 S100 6.3 126.0 10 150 548 383 –274 * 3
8 Volt
F380K476MSA S47 837.6 10 200 474 -332 237 * 3
10 Volt
F381A225MMA M2.2 10 10.0 6500 224 –157 112 * 3
F381A475MMA M4.7 10 10.0 6500 224 –157 112 * 3
F381A475MSA S4.7 10 4.7 10 300 387 –271 194 * 3
F381A106MMA M10 10 10.0 15 500 224 –157 112 * 3
F381A106MMAAH1 M10 10 10.0 15 300 289 –202 144 * 3
F381A106MSA S10 10 10.0 6200 474 –332 237 * 3
F381A226MMAAXE M22 10 44.0 10 500 224 157 –112 * 3
F381A226MSA S22 10 22.0 10 200 474 –332 237 * 3
F381A336MSALZT S33 10 99.0 10 200 474 332 –237 * 3
F381A476MSALZT S47 10 94.0 10 200 474 332 –237 * 3
25 Volt
F381E225MMA M2.2 25 10.0 10 500 224 –157 112 * 3
F381E475MSA S4.7 25 11.8 10 500 300 –210 150 * 3
*3: ΔC/C Marked “*” Moisture Sensitivity Level (MSL) is dened according to J-STD-020
082720
F38-LZT, F38-AXE
Rated Voltage (V) ≤60°C 46.3 10
60°C Surge Voltage (V) 5.2 813
85°C Derated Voltage (V) 2.8 4.5 7.2
105°C Derated Voltage (V) 2 3.3 5
227
The Important Information/Disclaimer is incorporated in the catalog where these specications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
F38 Series
Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors
RECOMMENDED DEREATING FACTOR
Voltage and temperature derating as percentge of Vr
QUALIFICATION TABLE
TEST F38 series (Temperature Range -55ºC to +105ºC)
Condition
Damp Heat
(Steady State)
At 40°C, 90 to 95% R.H., 500 hours (No voltage applied)
Capacitance Change ........... Refer to page 229 (*3)
Dissipation Factor ................ 200% or less of initial specied value
Leakage Current .................. 300% or less of Initial specied value
Temperature Cycles
At -55°C / +105°C, 30 minutes each, 5 cycles
Capacitance Change ........... Refer to page 229 (*3)
Dissipation Factor ................ 200% or less of initial specied value
Leakage Current .................. 400% or less of initial specied value
Resistance to
Soldering Heat
5 seconds reow at 260°C
Capacitance Change ........... Refer to page 229 (*3)
Dissipation Factor ................ 200% or less of initial specied value
Leakage Current .................. 300% or less of initial specied value
Surge
After application of surge voltage in series with a 1kΩ resistor at the rate of 30 seconds ON, 30 seconds OFF,
for 1000 successive test cycles at 85ºC or 60°C (*2), capacitors shall meet the characteristic requirements in the table above.
Capacitance Change ........... Refer to page 229 (*3)
Dissipation Factor ................ 200% or less of initial specied value
Leakage Current .................. 300% or less of initial specied value
Endurance
After 1000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C or 60°C (*2),
capacitors shall meet the characteristic requirements in the table above.
Capacitance Change ........... Refer to page 229 (*3)
Dissipation Factor ................ 200% or less of initial specied value
Leakage Current .................. 400% or less of initial specied value
Shear Test
After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side body which has no
electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the
terminal electrode.
Terminal Strength
Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite
bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a specied jig at the
center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no remarkable
abnormality on the capacitor terminals.
*2 LZT and AXE: Rated temperature 60°C, Surge and Endurance test temperature 60°C
100%
95%
90%
85%
80%
75%
70%
65%
60%
55%
50%
Cº501Cº58Cº55-
80%
72%
64%
F38 LZT, AXE
100%
80%
60%
40%
20%
0%
100%
80%
40%
-55ºC 0ºC 60ºC 105ºC
50%
Rated Voltage Rated Voltage
Recommended Applications
Voltage for Vr ≤6.3V
Recommended Applications
Voltage for Vr ≥8V
Recommended Applications Voltage
NOTICE: DESIGN, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
082720
228 The Important Information/Disclaimer is incorporated in the catalog where these specications came from or
available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
SERIES LINE UP : Conductive Polymer
F38 Series
Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors
SOLID ELECTROLYTIC CAPACITOR ROADMAP
010521
