SHANGHAI SUNRISE ELECTRONICS CO., LTD. 1N4933G THRU 1N4937G GLASS PASSIVATED FAST RECOVERY RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 50 TO 600V CURRENT: 1.0A FEATURES DO - 41 * Molded case feature for auto insertion * Glass passivated chip * Fast switching for high efficiency * High current capability * Low leakage current * High surge capability * High temperature soldering guaranteed: 250oC/10sec/0.375"(9.5mm) lead length at 5 lbs tension MECHANICAL DATA * Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C * Case: Molded with UL-94 Class V-O recognized flame retardant epoxy * Polarity: Color band denotes cathode * Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current VRRM VRMS VDC (9.5mm lead length, at Ta=75oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Forward Voltage (at rated forward current and 25oC) Maximum DC Reverse Current Ta=25oC (at rated DC blocking voltage) o Ta=100 C 1N 1N 1N 1N 1N UNITS 4933G 4934G 4935G 4936G 4937G 50 100 200 400 600 V 35 70 140 280 420 V 50 100 200 400 600 V IF(AV) 1.0 A IFSM 30.0 A VF 1.2 V IR 5.0 100 A 200 15.0 50.0 -65 to +150 nS pF Maximum Reverse Recovery Time (Note 1) trr CJ Typical Junction Capacitance (Note 2) R(ja) Typical Thermal Resistance (Note 3) TSTG,TJ Storage and Operation Junction Temperature Note: 1.Reverse recovery condition IF=1.0A, VR=30V 2.Measured at 1.0 MHz and applied voltage of 4.0Vdc 3.Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C. board mounted A o C/W o C http://www.sse-diode.com