General information D-Sub D-Sub mixed connector system HARTINGs' mixed D-Sub range brings the advantage of an industry standard I/O inter connect product with the possibility to customise for any application. The range is designed around the standard D-Sub shell sizes with the possibility to have a blend of contacts such as signals with c oaxial, power, high voltage or pneumatic contacts. Due to its construction, the product is fully shielded and helps reducing the EMI/RFI leakage. In addition, a complete range of accessories such as clinch nut, spacers, board locks, female screw lock, etc. are available. For blind mating feature, a specific high performance solution has been developed based on the combination of a floating plate and guiding pins providing up to 2.2 mm realignment capability. With all these accessories, the requirements of most applications are achievable and it makes this product range very attractive thanks to its versatility, reliability and cost effectiveness. All contacts are machined with two different platings. When hot plug-in is required, first mate last break contacts can also be supplied. 05 50 For connectors to be fitted on a board with SMT components, they can be supplied in an SMC (PiHIR) version which is assembled in the reflow solder process, thus reducing assembly cost. This blind mating concept is also achievable on the standard D as shown on the photo.