05
50
D-Sub
General information
D-Sub mixed connector system
HARTINGs’ mixed D-Sub range brings the
advantage of an industry standard I/O inter-
connect product with the possibility to customise
for any application.
The range is designed around the standard
D-Sub shell sizes with the possibility to have a
blend of contacts such as signals with coaxial,
power, high voltage or pneumatic contacts. Due to
its construction, the product is fully shielded and
helps reducing the EMI/RFI leakage.
All contacts are machined with two different
platings.
When hot plug-in is required, first mate last
break contacts can also be supplied.
For connectors to be fitted on a board with SMT
components, they can be supplied in an SMC
(PiHIR) version which is assembled in the reflow
solder process, thus reducing assembly cost.
In addition, a complete range of accessories such
as clinch nut, spacers, board locks, female screw
lock, etc. are available. For blind mating feature,
a specific high performance solution has been
developed based on the combination of a floating
plate and guiding pins providing up to 2.2 mm
realignment capability. With all these accessories,
the requirements of most applications are
achievable and it makes this product range very
attractive thanks to its versatility, reliability and
cost effectiveness.
This blind mating concept is also achievable on the standard
D as shown on the photo.
