21
UT0
Metal circular
connector
Description
“UT0” industrial circular connectors are a range
of multiway connectors available in 8 shell sizes
and 8 insert arrangements all intermateable,
interchangeable and intermountable with the
TRIM TRIO “UTG” and “UTP industrial connector
families.
“UT0” is equipped with identical shells from
military connectors complying to MIL-C-26482
spec.
Strong and rugged built to resist every
environmental and mechanical requirement for
indoor and outdoor applications.
Amongst several characteristics, “UT0” offers
possibilities on: Shielding, High levels on sealing
and salt spray. UT0 is also the perfect solution
to connect cat5e Ethernet applications in
combination with other signals, using the same
TRIM TRIO contacts (consult factory for more info).
Features and benefits (see p2)
• Suitable for shielding applications
• Available in 8 shell sizes and 8 insert
arrangements.
• Available in plug and receptacle versions for
both male and female contacts.
• Different insert orientations possible.
• Plastic inserts with flammability rating: UL94-V0.
• 2 levels of water protection: Dynamic IP67 and
IP68 both versions are IP69K
• 2 levels of salt spray: 48h and 96h
Higher salt spray resistance (200/500h) upon
request
• Cat5e Ethernet compatible. Can be combined
with other signals offering the advantage to use
same contacts (consult factory).
• UL recognition in process.
• Metal bayonet ring:
- Metal wave spring loaded
- Locks with audible positive “click”
- Assures 500 matings and unmatings
• RoHS compliant
Performance characteristics
Operating temp: -40°C to +105°C
Insulation
resistance: 5000 MΩ min.
Test potential: 2000 VAC
Durability: 500 matings and unmatings.
Vibration Per MIL-STD202
resistance: method 204
Thermal shock: Per MIL-STD202
method 207
Corrosion: Salt spray per MIL-STD 202
method 101
48h (standard version)
96h (black anodised
coupling ring)
Higher salt spray resistance (200/500h) upon
request
Shielding effectiveness: 95 dB at 1 Mhz
Degree of water protection per DIN 40050:
Dynamic IP67 / IP68 / IP69K in mated condition
and in combination with sealed back shell.
How to order
– –– –H or H6
H
–
–
P
S
12
12
14
14
0
6
UT0
UT0
Body variation: 0 : Wall mounting receptacle
6 : Cable plug
7 : Jam nut receptacle for rear panel mounting
Shell size:
Insert arrangement:
Type of contacts: P : Pin contacts
S : Socket contacts
Insert polarisation: No letter : Standard version
W, X, Y, Z: Different orientations (consult factory)
Application: H : Standard version, water protected IP 67 & IP 69K
H6 : Water protected IP 68 & IP 69K (only needed for wall mounting & jam nut receptacles)
Design variation: No letter : Standard version
Others : Special versions
Plating: No letter : Standard is nickel plating (48h salt spray)
01: Black anodised jam nut (96h salt spray)
02: Black anodised coupling ring (96h salt spray)
new
Construction
Shells: Zinc alloy
Backshells and cable glands: Brass
Coupling ring: Aluminium alloy
Coupling spring: Spring stainless steel
Insert: Glass-filled thermoplast UL94-V0
RoHS compliant
Contact accommodation
• “UT0” connectors accept TRIM TRIO size 16
crimp-type removable snap-lock contacts (see
contacts section)
• Contacts to be ordered seperately.
Dynamic IP68 / IP69K
High salt spray resistance
RoHS compliant
2
New UT0 - UT0W series
New UT0 – UT0W series:
• The exclusive new product range in the TRIM TRIO broadline.
• Aesthetic and top class performances
UT0 – UT0W series major technical features & benefits
For detailed information on UT0 and UT0W series offering see pages 21 to 31
• Full metal bayonet connector
– Enabling 500 mating-unmating without wear out
– Secure locking device: audible “click” when mating
• In accordance with following standards
– UT0 is Ethernet Cat5e compatible (consult factory)
– UTO-UTOW ranges are upgradeable to highspeed solutions
• RoHS compliant
– Cadmium and lead free materials are used
• High salt spray resistance*
– Can be used in severe environment
* Exists in 48 and 96 hours salt spray version
* Higher salt spray resistance (e.g. 200 or 500 hours) upon request
• Dynamic IP68*
Connector will remain IP68 even when:
– Pulling on the cable
– Bending the cable
* With appropriate back shell
* Exists also in IP67 version
• Dynamic IP69K*
Connector withstands high pressure water
cleaning.
* With appropriate back shell
New UT0-UT0W series
22
UT0
Cable plug for pin contacts (UT06- - - -PH)
Part number Shell Ø A ±0.2 B max. Ø C ±0.15 Ø D
±0.15 E
±0.25
size
UT06104PH 10 21.80 10.2 20.00
UT06128PH 12 26.10 13.4 23.60
UT061412PH 14 29.30 16.7 26.80 23.25
UT061619PH 16 32.45 33.00 19.7 30.00
UT061823PH 18 35.25 21.7 33.30
UT062028PH 20 38.80 24.9 36.55
UT062235PH 22 42.00 28.1 39.50 25.20
UT062448PH 24 45.05 31.2 42.60
Cable plug for socket contacts (UT06- - - -SH)
Part number Shell Ø A ±0.2 B max. Ø C ±0.15 Ø D
±0.15 E
±0.25
size
UT06104SH 10 21.80 10.2 20.00
UT06128SH 12 26.10 13.4 23.60
UT061412SH 14 29.30 33.00 16.7 26.80 23.25
UT061619SH 16 32.45 19.7 30.00
UT061823SH 18 35.25 21.7 33.30
UT062028SH 20 38.80 24.9 36.55
UT062235SH 22 42.00 27.30 28.1 39.50 25.20
UT062448SH 24 45.05 31.2 42.60
Part numbers are suitable for both IP67 and IP68 water protection
For 96h salt spray version add ”02” behind “H” e.g. UT061412PH02 (only bayonet ring will be black anodised)
Part numbers are suitable for both IP67 and IP68 water protection
For 96h salt spray version add ”02” behind “H” e.g. UT061412SH02 (only bayonet ring will be black anodised)
new
E ± 0,25
E ± 0,25
Dynamic IP68 / IP69K
High salt spray resistance
RoHS compliant
23
UT0
Wall mounting receptacle for pin contacts (UT00----PH/PH6)
Wall mounting receptacle for socket contacts (UT00----SH/SH6)
Part number
IP67 IP68
Shell
size
A
max.
B
± 0.3
C
± 0.2
Ø D
± 0.15
E
± 0.25
F
± 0.25
Ø G
± 0.1
Ø H
± 0.1
Ø J
± 0.1
UT00104PH UT00104PH6 10
33.23 1.6 11.35
15.0 18.3 23.8
3.2
17. 3 14 . 2
UT00128PH UT00128PH6 12 19.0 20.6 26.2 21.8 18.4
UT001412PH UT001412PH6 14 22.2 23.0 28.6 25.0 21.5
UT001619PH UT001619PH6 16 25.3 24.6 31.0 28.1 24.6
UT001823PH UT001823PH6 18 28.5 26.9 33.3 31.3 27.8
UT002028PH UT002028PH6 20
34.75 2.4 14 . 5 5 31.7 29.4 36.5 34.5 30.9
UT002235PH UT002235PH6 22 34.9 31.8 39.7 37.7 34.1
UT002448PH UT002448PH6 24 15.35 38.0 34.9 42.9 3.9 40.9 37.3
Part numbers are suitable for both 48h and 96h salt spray.
A square sealing has to be ordered separately to guarantee a sealing with equipment. Refer to “Circular accessories” section (UTFD--).
Part numbers are suitable for both 48h and 96h salt spray.
A square sealing has to be ordered separately to guarantee a sealing with equipment. Refer to “Circular accessories” section (UTFD--).
Part number
IP67 IP68
Shell
size
A
max.
B
± 0.3
C
± 0.2
Ø D
± 0.15
E
± 0.25
F
± 0.25
Ø G
± 0.1
Ø H
± 0.1
Ø J
± 0.1
UT00104SH UT00104SH6 10
25.20 1.6 11.35
15.0 18.3 23.8
3.2
17. 3 14 . 2
UT00128SH UT00128SH6 12 19.0 20.6 26.2 21.8 18.4
UT001412SH UT001412SH6 14 22.2 23.0 28.6 25.0 21.5
UT001619SH UT001619SH6 16 25.3 24.6 31.0 28.1 24.6
UT001823SH UT001823SH6 18 28.5 26.9 33.3 31.3 27.8
UT002028SH UT002028SH6 20
29.00 2.4 14 . 5 5 31.7 29.4 36.5 34.5 30.9
UT002235SH UT002235SH6 22 34.9 31.8 39.7 37.7 34.1
UT002448SH UT002448SH6 24 15.35 38.0 34.9 42.9 3.9 40.9 37.3
new
B ± 0,3
B ± 0,3
Ø G ± 0,1
Dynamic IP68 / IP69K
High salt spray resistance
RoHS compliant
24
UT0
Jam nut receptacle for pin contacts (UT07----PH/PH6) - suitable for rear panel mounting
Jam nut receptacle for socket contacts (UT07---SH/SH6) - suitable for rear panel mounting
Part number
IP67 IP68
Shell
size
Ø A
± 0.15
B
± 0.2
D
Max.
F
Max.
G
± 0.25
H
± 0.3
K
± 0.25
L
± 0.2
Ø M
± 0.2
UT07104PH UT07104PH6 10 14 . 9
19.30 33.90 3.2
27.0 22.2 16.6 17.0 17.7
UT07128PH UT07128PH6 12 19.0 31.8 27.0 20.8 21.2 22.5
UT071412PH UT071412PH6 14 22.2 34.9 30.2 23.9 24.3 25.7
UT071619PH UT071619PH6 16 25.3 38.1 33.3 27.1 27.5 28.7
UT071823PH UT071823PH6 18 28.5 41.3 36.5 30.3 30.6 32.0
UT072028PH UT072028PH6 20 31.7 24.70 39.00 6.4
46.1 39.7 33.4 33.8 35.2
UT072235PH UT072235PH6 22 34.9 49.2 42.9 36.6 37.0 38.4
UT072448PH UT072448PH6 24 38.0 25.50 40.50 53.4 46.0 39.8 40.1 41.5
For 96h salt spray version add ”01” at the end of the part number e.g. UT071412PH601 (only jam nut will be black anodised)
For 96h salt spray version add ”01” at the end of the part number e.g. UT071412PH601 (only jam nut will be black anodised)
Part number
IP67 IP68
Shell
size
Ø A
± 0.15
B
± 0.2
D
Max.
F
Max.
G
± 0.25
H
± 0.3
K
± 0.25
L
± 0.2
Ø M
± 0.2
UT07104SH UT07104SH6 10 14 . 9
19.30 33.00 3.2
27.0 22.2 16.6 17.0 17.7
UT07128SH UT07128SH6 12 19.0 31.8 27.0 20.8 21.2 22.5
UT071412SH UT071412SH6 14 22.2 34.9 30.2 23.9 24.3 25.7
UT071619SH UT071619SH6 16 25.3 38.1 33.3 27.1 27.5 28.7
UT071823SH UT071823SH6 18 28.5 41.3 36.5 30.3 30.6 32.0
UT072028SH UT072028SH6 20 31.7 24.70 39.00 6.4
46.1 39.7 33.4 33.8 35.2
UT072235SH UT072235SH6 22 34.9 49.2 42.9 36.6 37.0 38.4
UT072448SH UT072448SH6 24 38.0 25.50 40.50 53.4 46.0 39.8 40.1 41.5
new
Dynamic IP68 / IP69K
High salt spray resistance
RoHS compliant
25
UT0
Insert rotation positions
The table shows possible insert rotation
positions.
5 positions N,W,X,Y and Z differ in
the degree of rotation for the various
connectors sizes.
The table indicates the exact degree of
rotation.
Note: Insert rotation positions are optional
(consult factory)
Shell size Contact
number
Insert rotation positions
WXYZ
10 4 45 - - -
12 8 26---
14 12 60---
16 19 30 165 - 315
18 2 3 -158-270
20 28 79 - 259 -
22 35 13 162 198 265
24 48 60 120 189 351
new
Dynamic IP68 / IP69K
High salt spray resistance
RoHS compliant
Extra 0-seals for wall mounting (UT00) and jam nut (UT07)
receptacle connectos
An extra 0-seal must be mounted on the receptacle connectors when a backshell is used.
This to guarantee the IP68 sealing level
Part number Shell size
UT010REARSEAL 10
UT012REARSEAL 12
UT014REARSEAL 14
UT016REARSEAL 16
UT018REARSEAL 18
UT020REARSEAL 20
UT022REARSEAL 22
UT024REARSEAL 24