Contact Us Search MySupermicro
Products Motherboards Xeon® 3000 Boards [ PDSBM-LN2 ]
micro ATX
Dual Core Support
Value Server Platform
Key Features
1. Intel® Xeon® 3000 Series,
Core™2 Duo, Pentium® D,
Pentium 4 & Celeron D in LGA775
Package (FSB 1066/800/533)
2. Intel® 946GZ Chipset
3. Up to 4GB dual channel unbuffered,
non-ECC DDR2 667/533 SDRAM
4. 2x Intel® 82573 PCI-e Gigabit
LAN Port
5. Built-in SATA2 Controller
4x SATA (3Gbps) Drive Support
6. 1 Universal Slot Supporting:
1 (x4) (x8 physical) PCI-Express OR
1x 32-bit 33MHz PCI slot,
1x 32-bit 33MHz PCI
7. On Chip Intel 946GZ Video
8. 2 rear USB ports + 2 USB headers
Links & Resources
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest
Drivers and Utilities
Product SKUs - Discontinued SKU (EOL). Please contact
sales-rep for alternative options.
MBD-
PDSBM-LN2-
O
PDSBM-LN2 (Standard Retail Pack)
MBD-
PDSBM-LN2-
B
PDSBM-LN2 (Bulk Pack)
Physical Stats
Form Factor uATX
Dimensions 9.6" x 9.6 ", (24.4cm x 24.4cm)
Processor/Cache
CPU
Single LGA775 ZIF Socket
Supports a Dual-Core Intel® Xeon® 3000
Series
Supports an Intel® Core™2 Duo E6000
and E4000 Series
Supports an Intel® Pentium® E2000
Series
Supports an Intel® Pentium® D 945, 935,
925, 915 and 820, 805
Supports an Intel® Pentium® 4 600 and
500 Series
Supports an Intel® Celeron® E1000
Series
Supports an Intel® Celeron® 400 Series
Supports an Intel® Celeron® D 300
Series
NOTE: This board DOES NOT support
Q9000, E8000, E7000, E5000 series or
45nm processor
System Bus 1066 / 800 / 667 MHz system bus
System Memory
Memory
Capacity
Two 240-pin DIMM sockets
Supports up to 4 GB of unbuffered, non-
ECC DDR2 667/533MHz memory (Single /
Dual Channel)
Memory
Type
DDR2 667/533MHz unbuffered, non-ECC
SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes 256 MB, 512 MB, 1 GB, 2 GB
Memory
Voltage 1.8V only
On-Board Devices
Chassis ( Optimized for PDSBM-LN2 )
1U
CSE-811T-300
CSE-513F-260 (Mini 1U)
CSE-512F-260 (Mini 1U)
CSE-813MFT-300C (OEM and SuperServer
only)
CSE-502-200B
CSE-503-200B
CSE-510-200B
1U
(For Low-
Voltage CPU
only)
CSE-811T-260
CSE-512L-260 (Mini 1U)
CSE-513L-260 (Mini 1U)
Important
Note
Only Supermicro 1U chassis is
recommended for 1U Building Block
Solutions
Expansion Slots
Universal
Slot
1 (x4) (x8 physical) PCI-Express Slot OR
1x 32-bit 33MHz PCI Slot
PCI 1x 32-bit 33MHz PCI (5V) slots
System BIOS
BIOS Type 8Mb Flash EEPROM with PhoenixBIOS®
BIOS
Features
Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.3
Management
Software
SuperDoctor® III
Watch Dog
NMI
Power
Configurations
ACPI/APM Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Suspend to RAM (STR)
Power-on mode control for AC power
recovery
Internal / External modem remote ring-on
PC Health Monitoring
PDSBM-LN2
English
Chipset Intel 946GZ
ICH7R + Intel® 82573
Serial ATA
Intel® ICH7R SATA2 (3 Gbps) controller
built-in
Intel:
RAID 0, 1, 5, 10 support (Windows Only)
Network
Controllers
2 x Intel® 82573 Gigabit PCI-Express
Ethernet
Supports 10BASE-T, 100/1000BASE-TX,
RJ45 output
Graphics On Chip Intel 946GZ video
Super I/O Winbond 83627DHG chip
Clock
Generator ICS9LPRS511
Input / Output
Serial ATA Four Serial ATA ports ( 3Gbps )
Four SATA hard drives supported
IDE
One EIDE channel supports up to two
UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and
ATA/100
Floppy 1 Floppy controller; 1.44 MB
LAN 2x RJ45 LAN port
USB 4x USB 2.0 / 1.1 compatible
2 in front (FUCI), 2 in rear
VGA Intel 946GZ on chip
Keyboard /
Mouse PS/2 keyboard and mouse ports
Serial Ports 1x Fast UART 16550 serial port
1x Serial Header
Voltage
Monitors for CPU Cores, +1.8V, +3.3V,
+5V, ±12V, +3.3V/+5V Standby, VBAT, HT,
Memory, Chipset
CPU Core 4-Phase-switching voltage
regulator with auto-sense from 0.8375V-
1.6000V
FAN
Total of five 4-pin fan headers
5 x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on / off control
Support 3-pin PWM fans (with speed
control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan conn.
Temperature
Monitoring for CPU and chassis
environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
I2C temperature sensing logic
Thermal Monitor 2 (TM2) Support
PECI
LED
CPU / System Overheat LED
Suspend-state indicator LED
+5V standby alert LED
Other
Features
Chassis intrusion Detection
Chassis intrusion Header
SDDC Support
Operating Environment
Environmental
Spec.
Operating Temperature: 10°to 35°C (50°to
95°F)
Non-operating Temperature: -40°to 70°C
(-40°to 158°F)
Operating Relative Humidity: 8% to 90%
(non-condensing)
Non-operating Relative Humidity: 5 to 95%
(non-condensing)
Regulatory
FCC Passed to meet FCC standard requirement
Standard Retail Package
Part Number Qty Description
PDSBM-LN2 MBD-PDSBM-LN2-O 1PDSBM-LN2 Motherboard
Manual(s) MNL-0942 1Motherboard Manual for PDSBM-LN2
I/O Cables
CBL-0022L
CBL-0036L-03
CBL-0044L
1
1
4
ATX Floppy Cable
ATA 66/100 IDE LP Cable
SATA Cable (2Ft.)
Driver Disk CDR-PD 1Version 1.30 (or newer) CD
I/O Shield CSE-PT07L 1I/O Shield for PDSBM-LN2
Optional Parts List
Part Number Qty Description
Riser Card RSC-RR1U-32L
RSC-RR1U-E8
-
-
1U 32-bit PCI Riser Card for PDSML-LN2 (Full height, full length)
1U Universal (SXB-E) Slot to PCI-E Slot Riser Card for PDSML-LN2
Note: Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Terms & Conditions | Privacy | Investor Relations | Jobs | Site Map
SuperServer® | Motherboard | Chassis | Rack Cabinet | SuperBlade® | Embedded | Networking | Storage | Accessories | AMD Solution | Power Supplies
Copyright © 2019 Super Micro Computer, Inc.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
