Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FSAV330 -- 4-Channel, 2:1 Video Switch Features Description The FSAV330 video switch is a quad, single-pole / double-throw, high-speed CMOS TTL-compatible video switch. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Replacement for the P15V330 Wide Bandwidth: 300MHz 4 Switch Connection between Two Ports Minimal Propagation Delay through the Switch Low lCC Zero Bounce in Flow-through Mode Control Inputs Compatible with TTL Level When /OE is LOW, the select pin connects the A port to the selected B port output. When /OE is HIGH, the switch is OPEN and a high-impedance state exists between the two ports. Applications Set-Top Boxes Flat Panel Displays CRT Displays DVD - RW Ordering Information Operating Temperature Range Package Packing Method FSAV330MX -40 to +85C 16-Lead, Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 inch Narrow Tape and Reel FSAV330MTCX -40 to +85C 16-, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Tape and Reel FSAV330QSCX -40 to +85C 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150 inch Wide Tape and Reel Part Number The Fairchild switch family derives from and embodies Fairchild's proven switch technology used for several years in its 74LVX3L384 (FST3384) bus switch product. (c) 2002 Fairchild Semiconductor Corporation FSAV330 * Rev. 1.0.4 www.fairchildsemi.com FAV330 -- 4-Channel, 2:1 Video Switch September 2010 Figure 1. Logic Diagram S 1 16 VCC 1B1 2 15 /OE 1B2 3 14 4B1 1A 4 13 4B2 2B1 5 12 4A 2B2 6 11 3B1 2A 7 10 3B2 GND 8 9 3A FSAV330 -- 4-Channel, 2:1 Video Switch Pin Configurations Figure 2. Pin Assignments Pin Descriptions Pin # Name 15 /OE Description Bus Switch Enabled 1 S Select Input 4,7,9,12 A Bus A 2,3,5,6,10,11,13,14 B1-B2 Bus B 8 GND Ground 16 VCC Supply Voltage S /OE Function Don't Care HIGH Disconnected LOW LOW A=B1 HIGH LOW A=B2 Truth Table (c) 2002 Fairchild Semiconductor Corporation FSAV330 * Rev. 1.0.4 www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter VCC Supply Voltage Min. Max. Unit -0.5 +7.0 V VS DC Switch Voltage -0.5 +7.0 V VIN DC Input Voltage (1) -0.5 +7.0 V IIK DC Input Diode Current IOUT DC Output Sink Current 128 mA DC VCC / GND Current 100 mA +150 C 4000 V ICC/IGND -50 TSTG Storage Temperature Range ESD Human Body Model, JESD22-A114 -65 mA Note: 1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. FSAV330 -- 4-Channel, 2:1 Video Switch Absolute Maximum Ratings Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Min. Max. Unit VCC Power Supply 4.0 5.5 V VIN Input Voltage 0 5.5 V VOUT Output Voltage 0 5.5 V tr , tf Input Rise and Fall Time Switch Control Input 0 5 Switch I/O 0 DC TA Operating Temperature, Free Air -40 +85 ns/V C Note: 2. Unused control inputs must be held HIGH or LOW; they may not float. (c) 2002 Fairchild Semiconductor Corporation FSAV330 * Rev. 1.0.4 www.fairchildsemi.com 3 Typical values are at VCC=5.0V and TA= +25C. Minimum and maximum values are at TA= -40 to +85C. Symbol VANALOG VIK VIH VIL II IOZ Parameter Conditions Analog Signal Range Clamp Diode Voltage High-Level Input Voltage Low-Level Input Voltage Input Leakage Current Off-State Leakage Current 0 VIN 5.5V 0 A, B VCC VIN=1.0V, RI=75, ION=13mA VIN=2.0V, RI=75, ION=26mA VIN=VCC or GND, IOUT=0 One Input at 3.4V Other Inputs at VCC or GND (3) RON Switch On Resistance ICC Quiescent Supply Current ICC IIN=-18mA Increase in ICC per Input VCC (V) Min. 5.0 4.5 4.0 to 5.5 4.0 to 5.5 5.5 5.5 4.5 4.5 5.5 0 Typ. Max. Units 2 -1.2 V V V V A A 2.0 0.8 1.0 1.0 7 10 3 3 7 5.5 A 2.5 mA Note: 3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On resistance is determined by the lower of the voltages on the A or B pins. FSAV330 -- 4-Channel, 2:1 Video Switch DC Electrical Characteristics AC Electrical Characteristics TA=-40 to +85C, CL=50pF, RU=RD=500. Symbol tPZH, tPZL tPHZ, tPLZ BW Parameter Output Enable Time, Select to Bus B Output Enable Time, /OE to Bus A, B Output Disable Time, Select to Bus B Output Disable Time, Output Enable Time /OE to Bus A, B -3dB Bandwidth XTALK (4) Crosstalk DG Differential Gain DP Differential Phase OIRR Conditions Off Isolation VCC=4.5 - 5.5V Min. Typ. Max. 5.2 VI=7V for tPZL VI=Open for tPZH VI=7V for tPLZ VI=Open for tPHZ RL=150, TA=25C VCC=4.0V Min. Max. Figure ns Figure 3 Figure 4 ns Figure 3 Figure 4 5.7 5.1 5.6 5.2 5.5 5.5 Units 5.5 300 MHz RIN=10, RL=150, f=10MHz RL=150, f=3.58MHz RL=150, f=3.58MHz -58 dB 0.64 % 0.1 RL=150, f=10MHz -60 dB Note: 4. This parameter is guaranteed by device characterization, not production tested. Capacitance TA=+25C, f=1MHz. Capacitance is characterized, not production tested. Symbol CI/O CIN A Port B Port CON Parameter Conditions Control Pin Input Capacitance VCC=5.0V Input / Output Capacitance VCC, /OE=5.0V Switch On Capacitance VCC=5.0V, /OE=0V (c) 2002 Fairchild Semiconductor Corporation FSAV330 * Rev. 1.0.4 Typ. Units 3 7 pF 5 12 pF pF www.fairchildsemi.com 4 Notes: 5. Input drive by 50 source terminated in 50. 6. CL includes load and stray capacitance. 7. Input PRR=1.0MHz, tW =500ns. Figure 3. AC Test Circuit FSAV330 -- 4-Channel, 2:1 Video Switch AC Loadings and Waveforms Figure 4. AC Waveforms (c) 2002 Fairchild Semiconductor Corporation FSAV330 * Rev. 1.0.4 www.fairchildsemi.com 5 10.00 9.80 A 8.89 16 9 B 4.00 3.80 6.00 PIN ONE INDICATOR 1.75 1 5.6 8 0.51 0.35 1.27 (0.30) 0.25 M 1.27 C B A 0.65 LAND PATTERN RECOMMENDATION 1.75 MAX 1.50 1.25 FSAV330 -- 4-Channel, 2:1 Video Switch Physical Dimensions SEE DETAIL A 0.25 0.10 C 0.25 0.19 0.10 C 0.50 0.25 X 45 NOTES: UNLESS OTHERWISE SPECIFIED (R0.10) GAGE PLANE (R0.10) 8 0 0.36 A) THIS PACKAGE CONFORMS TO JEDEC MS-012, VARIATION AC, ISSUE C. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS D) CONFORMS TO ASME Y14.5M-1994 E) LANDPATTERN STANDARD: SOIC127P600X175-16AM F) DRAWING FILE NAME: M16AREV12. SEATING PLANE 0.90 0.50 (1.04) DETAIL A SCALE: 2:1 Figure 5. 16-Lead, Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150-inch Narrow Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c) 2002 Fairchild Semiconductor Corporation FSAV330 * Rev. 1.0.4 www.fairchildsemi.com 6 FSAV330 -- 4-Channel, 2:1 Video Switch Physical Dimensions LAND PATTERN RECOMMENDATION TOP VIEW END VIEW SIDE VIEW DETAIL A Figure 6. 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150-inch Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c) 2002 Fairchild Semiconductor Corporation FSAV330 * Rev. 1.0.4 www.fairchildsemi.com 7 5.000.10 4.55 5.90 4.45 7.35 0.65 4.40.1 1.45 FSAV330 -- 4-Channel, 2:1 Video Switch Physical Dimensions 5.00 0.11 12 MTC16rev4 Figure 7. 16-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c) 2002 Fairchild Semiconductor Corporation FSAV330 * Rev. 1.0.4 www.fairchildsemi.com 8 FSAV330 -- 4-Channel, 2:1 Video Switch (c) 2002 Fairchild Semiconductor Corporation FSAV330 * Rev. 1.0.4 www.fairchildsemi.com 9 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com