To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
September 2010
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4
FAV330 — 4-Channel, 2:1 Video Switch
FSAV330 — 4-Channel, 2:1 Video Switch
Features
Replacement for the P15V330
Wide Bandwidth: 300MHz
4Ω Switch Connection between Two Ports
Minimal Propagation Delay through the Switch
Low lCC
Zero Bounce in Flow-through Mode
Control Inputs Compatible wi th TTL Level
Applications
Set-Top Boxes
Flat Panel Displays
CRT Displa ys
DVD - RW
Description
The FSAV330 video switch is a quad, single-pole /
double-throw, high-speed CMOS TTL-compatible video
switch. The low on resistance of the switch allows
inputs to be connected to outputs without adding
propagation delay or generating additional ground
bounce noise.
When /OE is LOW, the select pin connects the A port to
the selected B port output. When /OE is HIGH, the
switch is OPEN and a high-impedance state exists
between the two ports.
Ordering Information
Part Number Operating
Temperature Range Package Packing
Method
FSAV330MX -40 to +85°C 16-Lead, Small Outline Integrated Circuit (SOIC),
JEDEC MS-012, 0.150 inch Narrow Tape and Reel
FSAV330MTCX -40 to +85°C 16-, Thin Shrink Small Outline Package
(TSSOP), JEDEC MO-153, 4.4mm Wide Tape and Reel
FSAV330QSCX -40 to +85°C 16-Lead, Quarter Size Outline Package (QSOP),
JEDEC MO-137, 0.150 inch Wide Tape and Reel
The Fairchild switch fam i l y deri ves from and em bodi es Fairchild’s proven switch tec hnol ogy used for several years i n i t s
74LVX3L384 (FST3384) bus switc h product.
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 2
FSAV330 — 4-Channel, 2:1 Video Switch
Pin Configurations
S
1B
1
1B
2
1A
2B
1
2B
2
2A
GND
V
CC
/OE
4B
1
4B
2
4A
3B
1
3B
2
3A
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
Figure 1. Logic Diagram Figure 2. Pin Assignments
Pin Descriptions
Pin # Name Description
15 /OE Bus Switch Enabled
1 S Select Input
4,7,9,12 A Bus A
2,3,5,6,10,11,13,14 B1-B2 Bus B
8 GND Ground
16 VCC Supply Voltage
Truth Table
S /OE Function
Don’t Care HIGH Disconnected
LOW LOW A=B1
HIGH LOW A=B2
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 3
FSAV330 — 4-Channel, 2:1 Video Switch
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol Parameter Min. Max. Unit
VCC Supply Voltage -0.5 +7.0 V
VS DC Switch Voltage -0.5 +7.0 V
VIN DC Input Voltage(1) -0.5 +7.0 V
IIK DC Input Diode Current -50 mA
IOUT DC Output Sink Current 128 mA
ICC/IGND DC VCC / GND Current ±100 mA
TSTG Storage Temperature Range -65 +150 °C
ESD Human Body Model, JESD22-A114 4000 V
Note:
1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are
observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol Parameter Min. Max. Unit
VCC Power Supply 4.0 5.5 V
VIN Input Voltage 0 5.5 V
VOUT Output Voltage 0 5.5 V
tr, tf Input Rise and Fall Time Switch Control Input 0 5 ns/V
Switch I/O 0 DC
TA Operating Temperature, Free Air -40 +85 °C
Note:
2. Unused control inputs must be held HIGH or LOW; they may not float.
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 4
FSAV330 — 4-Channel, 2:1 Video Switch
DC Electrical Characteristics
Typical values are at VCC=5.0V and TA= +25°C. Minimum and maximum values are at TA= -40 to +85°C.
Symbol Parameter Conditions VCC (V) Min. Typ. Max. Units
VANALOG Analog Signal Range 5.0 0 2 V
VIK Clamp Diode Voltage IIN=-18mA 4.5 -1.2 V
VIH High-Level Input Voltage 4.0 to 5.5 2.0 V
VIL Low-Level Input Voltage 4.0 to 5.5 0.8 V
II Input Leakage Current 0 ≤ VIN ≤ 5.5V 5.5 ±1.0 µA
IOZ Off-State Leakage Current 0 ≤ A, B ≤ VCC 5.5 ±1.0 µA
RON Switch On Resistance(3) VIN=1.0V, RI=75Ω, ION=13mA 4.5 3 7
Ω
VIN=2.0V, RI=75Ω, ION=26mA 4.5 7 10
ICC Quiescent Supply Current VIN=VCC or GND, IOUT=0 5.5 3 µA
ΔICC Increase in ICC per Input One Input at 3.4V
Other Inputs at VCC or GND 5.5 2.5 mA
Note:
3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On
resistance is determined by the lower of the voltages on the A or B pins.
AC Electrical Characteristics
TA=-40 to +85°C, CL=50pF, RU=RD=500Ω.
Symbol Parameter Conditions VCC=4.5 – 5.5V VCC=4.0V Units Figure
Min. Typ. Max. Min. Max.
tPZH, tPZL
Output Enable Time,
Select to Bus B VI=7V for tPZL
VI=Open for tPZH
5.2 5.7
ns Figure 3
Figure 4
Output Enable Time,
/OE to Bus A, B 5.1 5.6
tPHZ, tPLZ
Output Disable Time,
Select to Bus B VI=7V for tPLZ
VI=Open for tPHZ
5.2 5.5
ns Figure 3
Figure 4
Output Disable Time,
Output Enable Time
/OE to Bus A, B 5.5 5.5
BW -3dB Bandwidth(4) RL=150Ω, TA=25°C 300 MHz
XTALK Crosstalk RIN=10Ω,
RL=150Ω, f=10MHz -58 dB
DG Differential Gain RL=150Ω,
f=3.58MHz 0.64 %
DP Differential Phase RL=150Ω,
f=3.58MHz 0.1 °
OIRR Off Isolation RL=150Ω, f=10MHz -60 dB
Note:
4. This parameter is guaranteed by device characterization, not production tested.
Capacitance
TA=+25°C, f=1MHz. Capacitance is characterized, not production tested.
Symbol Parameter Conditions Typ. Units
CIN Control Pin Input Capacitance VCC=5.0V 3 pF
CI/O A Port Input / Output Capacitance VCC, /OE=5.0V 7 pF
B Port 5
CON Switch On Capacitance VCC=5.0V, /OE=0V 12 pF
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 5
FSAV330 — 4-Channel, 2:1 Video Switch
AC Loadings and Waveforms
Notes:
5. Input drive by 50Ω source terminated in 50Ω.
6. CL includes load and stray capacitance.
7. Input PRR=1.0MHz, tW=500ns. Figure 3. AC Test Circuit
Figure 4. AC Waveforms
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 6
FSAV330 — 4-Channel, 2:1 Video Switch
Physical Dimensions
X 45°
DETAIL A
SCALE: 2:1
8°
0°
NOTES: UNLESS OTHERWISE SPECIFIED
A) THIS PACKAGE CONFORMS TO JEDEC
MS-012, VARIATION AC, ISSUE C.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD
FLASH AND TIE BAR PROTRUSIONS
D) CONFORMS TO ASME Y14.5M-1994
E) LANDPATTERN STANDARD: SOIC127P600X175-16AM
F) DRAWING FILE NAME: M16AREV12.
SEATING PLAN E
GAGE PLANE
C
C0.10
SEE DETAIL A
LAND PATTERN RECOMMENDATION
PIN ONE
INDICATOR
1
16
8
M
0.25
9
CBA
B
A
5.6
1.27 0.65
1.75
10.00
9.80
8.89
6.00
1.27
(0.30)
0.51
0.35
1.75 MAX
1.50
1.25
0.25
0.10 0.25
0.19
(1.04)
0.90
0.50
0.36
(R0.10)
(R0.10)
0.50
0.25
4.00
3.80
Figure 5. 16-Lead, Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150-inch Narrow
Pack age drawings are provided as a service to customers considering Fairc hi l d components. Drawi ngs may change in any manner
without notice. P l ease note the revi sion and/or date on the drawing and contact a Fairchild Semic onductor representat i ve to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 7
FSAV330 — 4-Channel, 2:1 Video Switch
Physical Dimensions
SIDE VIEW
TOP VIEW
DETAIL A
END VIEW
LAND PATTERN
RECOMMENDATION
Figure 6. 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150-inch Wide
Pack age drawings are provided as a servic e t o customers c onsidering Fairchild components. Drawi ngs may change in any manner
without notice. P l ease note the revision and/or date on the drawing and contac t a Fairchild Semic onductor representat i ve to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 8
FSAV330 — 4-Channel, 2:1 Video Switch
Physical Dimensions
0.65
4.4±0.1
MTC16rev4
0.11
4.55
5.00
5.00±0.10
12°
7.354.45
1.45
5.90
Figure 7. 16-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Pack age drawings are provided as a service to customers considering Fairc hi l d components. Drawi ngs may change in any manner
without notice. P l ease note the revi sion and/or date on the drawing and contact a Fairchild Semic onductor representat i ve to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
FSAV330 • Rev. 1.0.4 9
FSAV330 — 4-Channel, 2:1 Video Switch
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
