Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor extended switching distance Ni35U-CK40-AP6X2-H1141 rectangular, height 40mm turnable sensor head (5 positions) plastic, PBT-GF30-V0 mounting with included plastic fixing clampp BS4-CK40 only factor 1 for all metals extended switching distance degree of protection IP68 magnetic field immune extended temperature range high switching frequency predamping protection through self-compensation Ni35U-CK40-AP6X2-H1141 1625800 3-wire DC, 10...30 VDC normally open pnp output connector, M12 x 1 Operating temperature 35 mm non-flush, partial flush mountable 3... 15 % 2 % 10 % 15 %, -25 C v +70 C -30 ...+ 85 C Rated operational voltage (DC) UB 10... 30 VDC Max. ripple 10 % Upp Rated operational current (DC) Ie 200 mA LED 40 30 5,3 x 7,3 40 M12 x 1 o 5,3 20 46 60 65 Type Ident-No. Rated operating distance Sn Mounting mode Hysteresis (switching distance) Min. repeat accuracy Temperature drift No-load current I0 15 mA Max. OFF-state current Max. switching frequency Rated insulation voltage Output function Short-circuit protection Max. voltage drop at Ie 0,1 mA 0,25 kHz 0,5 kV 3-wire, normally open, PNP yes, cyclic 1,8 V Wire breakage / reverse polarity protection Protection class yes / complete Housing style Dimensions Housing material Active face Wiring Vibration resistance Shock resistance Degree of protection rectangular; CK40 65 x 40 x 40 mm plastic, PBT-GF30-V0 plastic, PA6-GF30 connector, M12 x 1 55 Hz (1 mm) 30 x g (11 ms) IP68 Supply voltage indication Switching status indication Included with sensor LED green LED yellow BS4-CK40 / Wiring diagram pnp 1 BN + 3 BU 2 4 BK 3 BU 1 BN 4 BK Function principles Inductive proximity switches are designed for wear-free non-contact detection of metal objects. Due to a ferrite-less 3-coil system, Uprox factor 1 sensor have distinct advantages. The detect all metals at the same switching distance, are magnetic field immune and feature large switching distances. Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor extended switching distance Ni35U-CK40-AP6X2-H1141 Mounting instructions Gap D Gap W Gap T Gap S Gap G Gap N minimum gap 240 mm 105 mm 140 mm 20 mm 210 mm 30 mm Width of active face B 40 mm 4-side flush mounting possible 1-side flush mounting: Sr = 28 mm 2-side flush mounting: Sr = 24 mm 3-side flush mounting: Sr = 19 mm 4-side flush mounting: Sr = 15 mm N S back-mounting without having to reduce the switching distance D protruded mounting with switching distance reduction possible W G T T B Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264